Filter interviews by
I applied via Job Fair and was interviewed in Jul 2023. There were 3 interview rounds.
Gk, unit of measurements, SI unit of physical quantity, maths
The first film of an actor is often a significant milestone in their career.
The first film of an actor is usually the one that introduces them to the audience and sets the tone for their future work.
It can be a breakthrough role that propels them to stardom or a small part that leads to bigger opportunities.
Examples: Leonardo DiCaprio's first film was 'Critters 3', Meryl Streep's first film was 'Julia'.
I applied via Walk-in and was interviewed before Oct 2020. There were 3 interview rounds.
Top trending discussions
Mass production allows for lower costs due to economies of scale.
Lower production costs per unit
Increased efficiency in production processes
Ability to meet high demand quickly
Consistent quality control measures
Examples: assembly line production in automotive industry, electronics manufacturing
Fundamental deviation of hole in BIS system can be indicated by specifying the tolerance zone and the position of the hole.
Specify the tolerance zone for the hole based on the BIS system standards.
Measure the actual position of the hole and compare it to the specified tolerance zone.
If the actual position of the hole falls outside the tolerance zone, indicate it as a fundamental deviation.
A rack and pinion mechanism is used to convert linear motion of plunger to rotary motion of pointer in D.T.I.
Rack and pinion mechanism consists of a gear (pinion) that meshes with a linear gear (rack) to convert linear motion into rotary motion.
As the plunger moves linearly, it engages with the rack which in turn rotates the pinion, causing the pointer to move.
This mechanism is commonly used in devices like dial indica...
I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 3 interview rounds.
A relay holding circuit diagram is used to keep the relay in the energized state even after the control signal is removed.
The circuit typically includes a holding contact that maintains the relay coil energized.
A latching relay can also be used for holding without continuous power supply.
Examples: ladder logic diagram with a holding contact, latching relay circuit diagram.
PNP and NPN are types of bipolar junction transistors commonly used in electronic circuits.
PNP transistor has a layer of N-type semiconductor between two layers of P-type semiconductor, while NPN transistor has a layer of P-type semiconductor between two layers of N-type semiconductor.
In a PNP transistor, current flows from the emitter to the base and then to the collector, while in an NPN transistor, current flows fro...
There are various types of sensors used for different purposes.
Temperature sensors (e.g. thermocouples, thermistors)
Pressure sensors (e.g. piezoelectric sensors)
Motion sensors (e.g. accelerometers, gyroscopes)
Proximity sensors (e.g. ultrasonic sensors)
Light sensors (e.g. photodiodes, phototransistors)
PLC stands for Programmable Logic Controller, which is a digital computer used for automation of electromechanical processes.
PLC is used to control machinery in manufacturing processes, such as assembly lines, robotic devices, or any activity that requires high reliability control.
It is programmed using a specialized computer language, typically ladder logic or function block diagram.
PLCs are commonly used in industrie...
I applied via Walk-in and was interviewed in Mar 2022. There were 2 interview rounds.
I applied via Company Website
TTR stands for Total Thickness Range and is required for powder coating process to ensure proper adhesion and durability.
TTR is the range of thickness of the substrate and any coatings applied to it
It is important for powder coating as it ensures proper adhesion and durability
If the TTR is too large, the coating may not adhere properly or may crack and peel over time
Examples of substrates with varying TTR include alumi
Detection and prevention poka-yoke refers to the use of techniques to identify and prevent errors in a process.
Poka-yoke is a Japanese term for mistake-proofing
Detection poka-yoke involves identifying errors as they occur
Prevention poka-yoke involves designing processes to prevent errors from occurring
Examples of poka-yoke include using checklists, color-coding, and physical barriers
Poka-yoke can improve quality, reduc
Decrease in pH can occur due to various factors in conversion coating.
Decrease in pH can be caused by the addition of an acid or acidic solution.
Presence of reactive metals in the coating can lead to a decrease in pH.
Contamination by organic materials or impurities can also lower the pH.
Chemical reactions during the conversion coating process may result in pH decrease.
Examples of conversion coatings include phosphating
To prepare 0.1 N H2SO4 & NaOH, calculate the required amount of solute and dissolve it in distilled water.
Calculate the molar mass of H2SO4 and NaOH
Determine the required amount of solute using the formula: N = (W/M) x (1000/V)
Dissolve the calculated amount of solute in distilled water to make 1 liter of solution
Standardize the solution using a primary standard
Use a burette to measure the volume of solution needed for
To cross verify 0.1 normality H2SO4, use a standard solution of NaOH and an indicator.
Prepare a standard solution of NaOH of known concentration.
Add a few drops of an indicator such as phenolphthalein to the H2SO4 solution.
Titrate the H2SO4 solution with the NaOH solution until the endpoint is reached.
The endpoint is when the indicator changes color, indicating that all the H2SO4 has reacted with the NaOH.
Calculate the...
Prepare a pH buffer solution as per defined standard in tablet.
Determine the required pH value and buffer capacity
Select the appropriate buffer system and calculate the required amounts of buffer components
Dissolve the buffer components in water and adjust the pH as necessary
Check the pH and adjust if necessary
Filter the solution and store in a clean container
Use a calibrated pH meter to verify the pH of the solution
I applied via Referral and was interviewed before Nov 2023. There was 1 interview round.
To submit a form in PowerApps, use the SubmitForm function.
Use the SubmitForm function to submit the form data.
You can trigger the SubmitForm function on a button click or any other event.
Make sure to handle any validation or error messages before submitting the form.
SharePoint 2013 is an on-premises version while SharePoint Online is cloud-based.
SharePoint 2013 requires on-premises infrastructure, while SharePoint Online is cloud-based.
SharePoint 2013 requires manual updates and maintenance, while SharePoint Online is automatically updated by Microsoft.
SharePoint 2013 has a one-time licensing fee, while SharePoint Online is subscription-based.
SharePoint 2013 has limited storage ca...
I am a highly motivated and organized individual with a passion for leadership and team building.
I have several years of experience in management roles, including overseeing teams of up to 20 employees.
I am skilled in project management, budgeting, and strategic planning.
I have a proven track record of improving team performance and achieving business goals.
I am a strong communicator and enjoy collaborating with others...
As a member of FSAE club, I designed and built a formula-style race car for competition.
Designed and fabricated various components of the car, including the chassis, suspension, and steering system
Collaborated with team members to optimize the car's performance and ensure compliance with competition rules
Participated in testing and tuning sessions to improve the car's speed and handling
Managed the team's budget and res...
Stress strain curve for ductile material
Ductile materials can undergo large plastic deformations before failure
Stress strain curve shows the relationship between stress and strain during deformation
The curve has three regions: elastic, plastic, and necking
Elastic region: linear relationship between stress and strain
Plastic region: non-linear relationship between stress and strain
Necking region: localized reduction in c...
Piston rings are essential components in an engine that prevent oil from entering the combustion chamber and help maintain compression.
Piston rings create a seal between the piston and cylinder wall
They prevent oil from entering the combustion chamber
They help maintain compression by preventing gases from escaping
Piston rings also help dissipate heat from the piston
Without piston rings, the engine would lose power and
I chose to gain practical experience and develop my skills in the industry.
I wanted to gain practical experience in the industry
I believed that hands-on experience would be more valuable than a Masters degree
I wanted to develop my skills in a real-world setting
I felt that pursuing a Masters degree at this time would not align with my career goals
I have taken courses and attended workshops to continue my education and s
I have strong leadership, communication, and problem-solving skills that can benefit the company.
Leadership skills to motivate and guide team members towards achieving goals
Effective communication skills to ensure clear understanding and collaboration among team members and with customers
Strong problem-solving skills to identify and resolve issues efficiently and effectively
Experience in managing budgets, schedules, an...
The spring stiffness depends on various factors.
The material of the spring
The thickness of the wire used in the spring
The number of coils in the spring
The diameter of the spring
The length of the spring
The type of loading on the spring
The temperature of the spring
The presence of any pre-stress in the spring
I was involved in various non-technical works in FSAE club.
Organizing and managing team meetings
Coordinating with sponsors and arranging sponsorships
Planning and executing fundraising events
Recruiting new members and conducting interviews
Managing team budget and expenses
I'm sorry, I don't have that information.
N/A
Bosch is a leading global technology and services company with a strong focus on innovation and sustainability.
Bosch has a reputation for quality and reliability in its products and services.
The company invests heavily in research and development to stay ahead of the curve.
Bosch is committed to sustainability and has set ambitious goals to reduce its carbon footprint.
The company offers a wide range of career opportunit...
RBEI stands for Robert Bosch Engineering and Business Solutions.
RBEI is a subsidiary of the Bosch Group.
It provides engineering and IT solutions to various industries.
RBEI has its headquarters in Bangalore, India.
Some of the services offered by RBEI include software development, testing, and validation.
RBEI has a global presence with offices in various countries including Germany, USA, and Japan.
I am interested in this post because of the growth opportunities and the chance to lead a team.
I have experience in managing teams and want to continue to develop my leadership skills.
I am excited about the potential for growth within the company and want to be a part of that.
I am passionate about the industry and want to contribute to its success.
I believe my skills and experience make me a strong candidate for this p
I would consider the offer and evaluate the benefits and growth opportunities before making a decision.
I would assess the job responsibilities and compare them to my current role
I would research the company culture and values
I would consider the salary and benefits package
I would evaluate the potential for growth and advancement
I would weigh the commute and work-life balance
Ultimately, I would make a decision based on
My family background is diverse and includes members from different professions and cultural backgrounds.
My father is a doctor and my mother is a teacher.
I have two siblings, one is an engineer and the other is a lawyer.
My grandparents were farmers and lived in a rural area.
We celebrate both traditional and modern holidays as a family.
My family values education and hard work.
Hard working is putting in a lot of effort, while smart working is putting in effort in the right direction.
Hard working is about working long hours and putting in a lot of effort, while smart working is about working efficiently and effectively.
Hard working can lead to burnout and exhaustion, while smart working can lead to better productivity and work-life balance.
An example of hard working is staying late at the off...
I am motivated by the sense of accomplishment and the opportunity to learn and grow.
I find satisfaction in completing tasks and achieving goals
I enjoy learning new skills and expanding my knowledge
I am driven by the desire to succeed and make a positive impact
I am inspired by the potential for growth and advancement within a company
My greatest achievement is completing my degree while working full-time and maintaining a high GPA.
Completed degree while working full-time
Maintained high GPA
Balanced work and school responsibilities
Received academic honors and awards
Yes, I did go through the company website and familiarized myself with various areas where Bosch is into.
I visited the Bosch website and explored the different sections such as About Us, Products & Services, and Careers.
I read about Bosch's history, values, and mission statement.
I learned about the various industries that Bosch operates in, such as automotive technology, industrial technology, and consumer goods.
I also...
The pre-placement-talk was given by Mr. John Doe.
The speaker's name was Mr. John Doe.
He gave the pre-placement-talk.
He discussed the company's history, culture, and job opportunities.
He also talked about the company's values and expectations from employees.
I am looking for a challenging role that allows me to utilize my skills and experience to contribute to the growth of the company.
Opportunities for growth and development
A supportive and collaborative work environment
Clear expectations and goals
Recognition for hard work and achievements
A competitive salary and benefits package
I plan to pursue a Master's degree in Business Administration.
I have researched various universities and programs that align with my career goals.
I plan to take the GMAT exam and apply to multiple schools.
I am also considering online programs to balance work and studies.
I hope to gain a deeper understanding of business strategy and leadership.
I believe this will enhance my skills and contribute to my future success as
based on 2 interviews
Interview experience
based on 11 reviews
Rating in categories
Assistant Engineer
2.7k
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Engineer
1.8k
salaries
| ₹0 L/yr - ₹0 L/yr |
Diploma Trainee Engineer
931
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
412
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
366
salaries
| ₹0 L/yr - ₹0 L/yr |
DENSO
MAHLE Behr India
Sanden Vikas
Valeo