Filter interviews by
I was interviewed before Jan 2024.
A balling disc is a tool used in the pelletizing process to create uniform pellets from powdered materials.
A balling disc consists of a rotating pan with adjustable angles and a liquid binder spray system.
To handle a balling disc effectively, operators should regularly monitor and adjust the disc speed, angle, and binder spray rate.
Potential problems with a balling disc include uneven pellet size, low pellet strength, ...
The problems associated with balling include material sticking together, uneven size distribution, and issues with moisture content. Controlling dry or moist materials involves adjusting the composition and process parameters. Addressing issues from disturbed material in the balling disc requires quick adjustments and monitoring.
Problems with balling include material sticking together, uneven size distribution, and iss...
In this situation, I would first investigate the root cause of the moisture material report and balling disturbance before taking any action.
Investigate the source of the moisture material report to determine if it is a recurring issue or a one-time occurrence.
Check the equipment and processes involved in the balling process to identify any potential causes of disturbance.
Consult with relevant team members or experts t...
I have used ob and bento for balling by creating custom animations and interactions.
Used ob to create custom animations for the balling process
Utilized bento for interactive elements like selecting ball size and weight
Integrated both tools to enhance user experience and engagement
When high or low grinding material report, I adjust the settings on the machine and check for any issues with the material.
Check the settings on the machine for grinding material
Adjust the settings accordingly to address the high or low report
Inspect the material for any issues or abnormalities
Make necessary adjustments to ensure proper grinding process
Top trending discussions
A turbine is a device that converts the energy from a fluid flow into useful work, typically by rotating a shaft.
Turbines are commonly used in power generation, aviation, and marine propulsion.
They work on the principle of Newton's third law of motion, where the reaction force of the fluid flow causes the turbine blades to rotate.
Turbines can be classified into various types such as steam turbines, gas turbines, and hy...
posted on 19 Aug 2023
Production rate refers to the speed at which goods are produced in a given period of time.
Production rate can be measured in units per hour, day, week, etc.
Factors that can affect production rate include equipment efficiency, worker productivity, and supply chain disruptions.
For example, a factory may have a production rate of 100 units per hour.
Increasing production rate can lead to higher output and potentially highe
Pellets are made by compressing or molding a material into a small, cylindrical shape.
Choose the material you want to make pellets from, such as wood, plastic, or metal.
Grind or shred the material into small pieces.
Add a binding agent, such as water or a chemical adhesive, to help the material stick together.
Use a pellet mill or press to compress the material into the desired shape and size.
Dry the pellets to remove an...
Quality is essential for ensuring customer satisfaction and product success.
Quality is crucial in maintaining customer satisfaction and loyalty.
High quality products lead to positive reviews and recommendations.
Quality control processes help identify and rectify any defects or issues.
Investing in quality can result in long-term cost savings by reducing returns and warranty claims.
I applied via Referral and was interviewed in Mar 2021. There was 1 interview round.
The operation refers to a specific action or procedure performed to achieve a desired outcome.
An operation is a planned activity that involves a series of steps or actions.
It is typically performed by a person or a machine to accomplish a specific task.
Operations can vary across different fields such as medicine, manufacturing, technology, etc.
Examples of operations include surgical procedures, manufacturing processes,
I applied via Walk-in and was interviewed in Nov 2023. There were 2 interview rounds.
I applied via Walk-in and was interviewed in Aug 2024. There was 1 interview round.
The question seems to be asking about the diameter of a machine part called a mudgan in a mudgan machine.
The question is likely asking for the diameter of the mudgan in the mudgan machine.
Provide information about the mudgan machine and its components.
Explain the purpose of the mudgan in the machine.
Discuss any specific measurements or specifications related to the mudgan.
The length of a lancing pipe varies depending on the specific application and requirements.
The length of a lancing pipe can range from a few inches to several feet.
It is important to consider the depth of the operation and the reach needed when determining the length of the lancing pipe.
Different industries and tasks may require different lengths of lancing pipes, such as in welding, plumbing, or industrial cleaning.
The air pressure in a drilling machine is typically controlled by the operator and can vary depending on the specific machine and drilling requirements.
Air pressure in drilling machines is usually measured in pounds per square inch (psi).
The optimal air pressure for a drilling machine can vary based on factors such as the type of material being drilled, the size of the drill bit, and the depth of the hole.
Operators sho...
The length of the drill rod depends on the specific operation and equipment being used.
The length of the drill rod can vary based on the depth of the hole being drilled.
Different types of drilling operations may require different lengths of drill rods.
It is important to consider the reach and capabilities of the drilling equipment when determining the length of the drill rod.
I applied via Job Portal and was interviewed before Nov 2021. There were 3 interview rounds.
Direct through campus placement and group discussion.
I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.
ICP OES is a technique used for chemical analysis of chromite ore.
ICP OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is a powerful analytical technique used for the determination of trace elements in a variety of matrices.
ICP OES can be used to determine the concentration of elements such as Cr, Fe, Mg, Al, and Si in chromite ore.
The technique involves the excitation of atoms in a sample usi...
ICP-OES is a technique used for elemental analysis in which a sample is vaporized and excited by a plasma to emit light.
ICP-OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is used to determine the concentration of elements in a sample.
The sample is vaporized and excited by a plasma to emit light, which is then analyzed to determine the elemental composition.
ICP-OES is commonly used in environ...
Weight chemical analysis of chromite ore involves determining the percentage of various elements present in the ore.
The ore is first crushed and ground into a fine powder.
The powder is then mixed with various chemicals to dissolve the elements of interest.
The resulting solution is then analyzed using various techniques such as atomic absorption spectroscopy or inductively coupled plasma mass spectrometry.
The percentage...
I applied via Walk-in and was interviewed in Mar 2023. There were 2 interview rounds.
Rankine cycle is a thermodynamic cycle used in power plants to generate electricity.
Rankine cycle is a closed-loop cycle that uses steam to generate power.
The cycle consists of four processes: heating, vaporization, expansion, and condensation.
The efficiency of the Rankine cycle can be improved by increasing the temperature and pressure of the steam.
The Rankine cycle is commonly used in power plants to generate electri...
I applied via Naukri.com and was interviewed before Sep 2020. There were 3 interview rounds.
Unnatural vibrations in equipments can be reduced by proper maintenance and installation.
Ensure proper alignment of equipment parts
Use vibration dampeners or absorbers
Regularly inspect and replace worn out parts
Install equipment on a stable foundation
Reduce equipment speed or load if possible
Some of the top questions asked at the Jindal Steel and Power Operator interview -
based on 1 interview
Interview experience
based on 9 reviews
Rating in categories
Assistant Manager
2.2k
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
1k
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
977
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
763
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
615
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
Vedanta Limited