Upload Button Icon Add office photos

Filter interviews by

STEELBIRD INTERNATIONAL Mechanical Engg. Design Interview Questions and Answers

Updated 25 Jan 2023

STEELBIRD INTERNATIONAL Mechanical Engg. Design Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How does wrap command works
  • Ans. 

    Wrap command in mechanical design software is used to wrap a 2D sketch onto a 3D surface.

    • Wrap command is used to create a 3D feature by wrapping a 2D sketch onto a 3D surface.

    • It is useful in creating complex shapes and patterns on curved surfaces.

    • The wrap command can be used in conjunction with other features like extrude, revolve, etc.

    • Examples of using wrap command include creating logos on curved surfaces, embossing

  • Answered by AI
  • Q2. Difference between flex and loft.
  • Ans. 

    Flex refers to the ability of a club to bend during a swing, while loft refers to the angle of the clubface.

    • Flex affects the trajectory and distance of a shot, while loft affects the height and spin of a shot.

    • Flex is determined by the stiffness of the shaft, while loft is determined by the angle between the clubface and the shaft.

    • Examples of flex include regular, stiff, and extra stiff, while examples of loft include d

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Past working experiences

Interview Preparation Tips

Interview preparation tips for other job seekers - Be patient and keep your mind calm.
Listen properly and answer the questions slowly and confidently. Don't be in a rush to answer.
Think before you speak.

Skills evaluated in this interview

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I applied via Campus Placement and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Easy normal quesstion basic questions

Round 2 - Technical 

(5 Questions)

  • Q1. Easy questions , 1st law of thermodyanamics, more hr based
  • Q2. 1st law thermodyanics
  • Q3. What is turbines
  • Ans. 

    Turbines are machines that convert fluid energy into mechanical energy by using a rotor to capture the energy of a moving fluid.

    • Turbines are commonly used in power plants to generate electricity from steam, water, or wind.

    • There are different types of turbines such as steam turbines, gas turbines, and wind turbines.

    • The rotor of a turbine is connected to a shaft which drives a generator to produce electricity.

    • Turbines ar...

  • Answered by AI
  • Q4. What is conduction
  • Ans. 

    Conduction is the transfer of heat or electricity through a material without any movement of the material itself.

    • Conduction occurs through direct contact between particles in a material.

    • Materials with high conductivity, like metals, transfer heat or electricity more efficiently.

    • Examples include a metal spoon getting hot when placed in a hot liquid, or a wire conducting electricity.

    • Insulators, like rubber or wood, have ...

  • Answered by AI
  • Q5. What is convection
  • Ans. 

    Convection is the transfer of heat through a fluid (liquid or gas) by the movement of the fluid itself.

    • Convection occurs when a fluid is heated, becomes less dense, and rises, while cooler fluid sinks and takes its place.

    • Examples of convection include boiling water, ocean currents, and atmospheric circulation.

    • Convection is an important mechanism for heat transfer in many engineering applications.

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Define MTTR and MTBF
  • Ans. 

    MTTR stands for Mean Time To Repair, the average time taken to repair a failed component. MTBF stands for Mean Time Between Failures, the average time between failures of a component.

    • MTTR is the average time taken to repair a failed component.

    • MTBF is the average time between failures of a component.

    • MTTR is calculated as total downtime divided by the number of failures.

    • MTBF is calculated as total operating time divided ...

  • Answered by AI
  • Q2. Meter in and meter out
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Vernier caliper
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2023. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me about your current profile
  • Q2. Which companies have you worked in past
Round 2 - Technical 

(2 Questions)

  • Q1. Explain all clause of IATF which are auditable.
  • Q2. Explain VSA audit ?

Interview Preparation Tips

Topics to prepare for Bharat Seats Senior Engineer Mechanical interview:
  • IATF
  • VSAT
  • VSAM
  • Internal Audit
  • MRM
  • KPI Monitoring
  • EHS
  • OHAS
  • SPC
  • Apqp
Interview preparation tips for other job seekers - Just keep things which you are doing or reflection of your CV
Round 1 - Technical 

(1 Question)

  • Q1. Least count of a vernier caliper, micrometer or steam turbine etc
  • Ans. 

    The least count of a measuring instrument is the smallest value that can be measured with it.

    • The least count of a vernier caliper is typically 0.02 mm.

    • The least count of a micrometer is typically 0.01 mm.

    • The least count of a steam turbine depends on the specific turbine and its design.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for technical question

I applied via campus placement at Indo Danish Tool Room, Jamshedpur and was interviewed in Jan 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. About the cv and about machines?
  • Q2. About measuring instruments and gauges.?

Interview Preparation Tips

Interview preparation tips for other job seekers - Should have bacis knowledge of area you going to .
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Types of engine and whatis that
  • Ans. 

    Types of engines include internal combustion engines, steam engines, and electric engines.

    • Internal combustion engines: gasoline, diesel, rotary, etc.

    • Steam engines: used in locomotives, ships, and industrial settings.

    • Electric engines: used in electric vehicles, trains, and some aircraft.

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. About your life and your family .
Round 4 - HR 

(1 Question)

  • Q1. About your knowledge test

I applied via Referral

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How can handle the breakdown in the machine?
  • Ans. 

    Breakdowns can be handled by identifying the root cause, performing maintenance, and implementing preventive measures.

    • Identify the root cause of the breakdown

    • Perform maintenance on the machine

    • Implement preventive measures to avoid future breakdowns

    • Regularly inspect and maintain the machine

    • Train operators on proper usage and maintenance

    • Keep spare parts on hand for quick repairs

    • Establish a maintenance schedule

    • Monitor mac

  • Answered by AI
  • Q2. Give the solution of the type of breakdown
  • Ans. 

    Breakdown can be of various types such as mechanical, electrical, thermal, and chemical.

    • Mechanical breakdown occurs due to wear and tear of mechanical parts.

    • Electrical breakdown occurs due to excessive voltage or current.

    • Thermal breakdown occurs due to excessive heat.

    • Chemical breakdown occurs due to chemical reactions.

    • The solution to each type of breakdown varies depending on the cause and severity.

    • Regular maintenance ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer the question fully confident.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. How many types of tryer ?
  • Ans. 

    There are two main types of tryer: single tryer and double tryer.

    • Single tryer is used for determining the moisture content of a sample by drying it in an oven.

    • Double tryer is used for determining the moisture content of a sample by drying it in a controlled environment with a balance to measure weight loss.

    • The choice of tryer depends on the specific requirements of the analysis being performed.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good working place

STEELBIRD INTERNATIONAL Interview FAQs

How many rounds are there in STEELBIRD INTERNATIONAL Mechanical Engg. Design interview?
STEELBIRD INTERNATIONAL interview process usually has 3 rounds. The most common rounds in the STEELBIRD INTERNATIONAL interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in STEELBIRD INTERNATIONAL Mechanical Engg. Design interview?

Some of the top questions asked at the STEELBIRD INTERNATIONAL Mechanical Engg. Design interview -

  1. How does wrap command wo...read more
  2. Difference between flex and lo...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 STEELBIRD INTERNATIONAL interview
Company Website
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

TVS Motor Interview Questions
4.0
 • 304 Interviews
Royal Enfield Interview Questions
4.2
 • 144 Interviews
Global Autotech Interview Questions
4.1
 • 45 Interviews
Ag Industries Interview Questions
4.0
 • 39 Interviews
NGK Spark Plugs Interview Questions
4.1
 • 22 Interviews
Mungi Group Interview Questions
3.8
 • 22 Interviews
View all
NPD Engineer
6 salaries
unlock blur

₹2.5 L/yr - ₹4.2 L/yr

Area Sales Manager
5 salaries
unlock blur

₹2.2 L/yr - ₹4.5 L/yr

MIS Executive
5 salaries
unlock blur

₹2.4 L/yr - ₹4 L/yr

Quality Manager /MR
4 salaries
unlock blur

₹5.2 L/yr - ₹14 L/yr

Rubber Technologist
4 salaries
unlock blur

₹3 L/yr - ₹9.1 L/yr

Explore more salaries
Compare STEELBIRD INTERNATIONAL with

Vega Auto Accessories

3.8
Compare

Thh Helmets

4.0
Compare

Royal Enfield

4.2
Compare

TVS Motor

4.0
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview