Add office photos
Filter interviews by
Somic ZF Components Quality Inspector Interview Questions and Answers
Somic ZF Components Quality Inspector Interview Experiences
1 interview found
Anonymous
(2 Questions)
- Q1. Process quality inspector
- Q2. Inspection set up approval line check
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Selected
I applied via Walk-in and was interviewed in Jan 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Technical & industrial
- Q2. Technical & professional
- Q3. Professional Good work
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Aug 2022. There were 2 interview rounds.
(5 Questions)
- Q1. What is the 7q sudule
- Ans.
The 7Q schedule is a quality management tool used to identify and address potential problems in a systematic manner.
The 7Q schedule consists of seven steps that help in identifying and resolving quality issues.
Each step focuses on a specific aspect of quality management, such as process analysis, root cause identification, and corrective actions.
The schedule helps ensure that quality standards are met and maintained th...
- Q2. What is the qa & qc
- Ans.
QA (Quality Assurance) and QC (Quality Control) are two processes that ensure the quality of a product or service.
QA focuses on preventing defects and ensuring that the product meets the required standards.
QC focuses on identifying defects and correcting them before the product is released.
QA is a proactive process while QC is a reactive process.
QA involves planning, designing, and implementing quality systems while QC...
- Q3. What is the least count of digital vernier caliper
- Ans.
The least count of a digital vernier caliper is the smallest measurement that can be accurately read.
The least count is determined by the number of divisions on the main scale and the number of divisions on the vernier scale.
It is usually expressed in millimeters or inches.
For example, if the main scale has divisions of 1 mm and the vernier scale has 10 divisions, the least count would be 0.1 mm.
The least count indicat...
- Q4. What is the principal of micrometre
- Ans.
The principle of micrometre is to measure small distances or thicknesses with high precision.
Micrometre is a measuring instrument used to measure dimensions in micrometers (µm).
It consists of a stationary anvil and a movable spindle that can be adjusted to measure the distance between them.
The micrometre scale is typically graduated in increments of 0.01 mm or 0.001 mm.
To measure an object, the spindle is brought into ...
- Q5. What is the diff b/w micrometre and vernier caliper
- Ans.
Micrometer and vernier caliper are both precision measuring instruments, but they differ in their design and usage.
Micrometer is used for measuring small dimensions with high accuracy, typically in the range of 0.001mm to 25mm.
Vernier caliper is used for measuring larger dimensions with good accuracy, typically in the range of 0.02mm to 1500mm.
Micrometer has a spindle and anvil mechanism, where the spindle moves toward...
Interview Preparation Tips
- Qa and qc
What is quality
I applied via Campus Placement and was interviewed before Dec 2020. There were 4 interview rounds.
Interview Questionnaire
4 Questions
- Q1. All Quality data , check sheet knowledge
- Q2. Panit shop Quality paint testing etc
- Q3. 7 qc tools Knowledge and empliment 5s 4m 3retc.
- Q4. Paint defects
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 4 interview rounds.
Interview Questionnaire
9 Questions
- Q1. What is the quality?
- Ans.
Quality is the degree of excellence of a product or service that meets or exceeds customer expectations.
Quality is meeting or exceeding customer expectations
It is the degree of excellence of a product or service
It involves meeting the required specifications and standards
It is achieved through continuous improvement and adherence to processes
Examples of quality include durability, reliability, and customer satisfaction
- Q2. The standard of something as measured against, other things of similar kind ,the degree of excellence of something that's a means of quality.
- Q3. What is time?
- Ans.
Time is a concept that measures the duration between events or moments.
Time is a continuous and irreversible flow of events.
It can be measured in seconds, minutes, hours, days, weeks, months, and years.
Time is relative and can be perceived differently by different people.
It is an essential factor in scheduling, planning, and organizing.
Examples of time-related measurements include clock time, calendar time, and elapsed
- Q4. Total productive maintenance
- Q5. How many experience do you
- Q6. 4 year in industrial development companies
- Q7. Why do you want to be aquality Inspector
- Ans. I can considering quality incoperates and the same time ensure products are safed and meet or exceed consumer expectations.
- Q8. What do you want to join quality team?
- Q9. I enjoy being busy and making sure that every product that goes out customers is the highest quality.
Interview Preparation Tips
Selected
I applied via Walk-in and was interviewed in Jan 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Technical & industrial
- Q2. Technical & professional
- Q3. Professional Good work
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Aug 2022. There were 2 interview rounds.
(5 Questions)
- Q1. What is the 7q sudule
- Ans.
The 7Q schedule is a quality management tool used to identify and address potential problems in a systematic manner.
The 7Q schedule consists of seven steps that help in identifying and resolving quality issues.
Each step focuses on a specific aspect of quality management, such as process analysis, root cause identification, and corrective actions.
The schedule helps ensure that quality standards are met and maintained th...
- Q2. What is the qa & qc
- Ans.
QA (Quality Assurance) and QC (Quality Control) are two processes that ensure the quality of a product or service.
QA focuses on preventing defects and ensuring that the product meets the required standards.
QC focuses on identifying defects and correcting them before the product is released.
QA is a proactive process while QC is a reactive process.
QA involves planning, designing, and implementing quality systems while QC...
- Q3. What is the least count of digital vernier caliper
- Ans.
The least count of a digital vernier caliper is the smallest measurement that can be accurately read.
The least count is determined by the number of divisions on the main scale and the number of divisions on the vernier scale.
It is usually expressed in millimeters or inches.
For example, if the main scale has divisions of 1 mm and the vernier scale has 10 divisions, the least count would be 0.1 mm.
The least count indicat...
- Q4. What is the principal of micrometre
- Ans.
The principle of micrometre is to measure small distances or thicknesses with high precision.
Micrometre is a measuring instrument used to measure dimensions in micrometers (µm).
It consists of a stationary anvil and a movable spindle that can be adjusted to measure the distance between them.
The micrometre scale is typically graduated in increments of 0.01 mm or 0.001 mm.
To measure an object, the spindle is brought into ...
- Q5. What is the diff b/w micrometre and vernier caliper
- Ans.
Micrometer and vernier caliper are both precision measuring instruments, but they differ in their design and usage.
Micrometer is used for measuring small dimensions with high accuracy, typically in the range of 0.001mm to 25mm.
Vernier caliper is used for measuring larger dimensions with good accuracy, typically in the range of 0.02mm to 1500mm.
Micrometer has a spindle and anvil mechanism, where the spindle moves toward...
Interview Preparation Tips
- Qa and qc
What is quality
I applied via Walk-in and was interviewed in Mar 2021. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Tell Me About Yourself. How Did You Hear About This Position? Why Do You Want to Work at This Company? Why Do You Want This Job? Why Should We Hire You? What Can You Bring to the Company? What Are Yo...
Interview Preparation Tips
We’ve turned to a handful of career experts to hear their best interview tips so that you can feel calm and confident going into your interview.
I applied via Campus Placement and was interviewed before Dec 2020. There were 4 interview rounds.
Interview Questionnaire
4 Questions
- Q1. All Quality data , check sheet knowledge
- Q2. Panit shop Quality paint testing etc
- Q3. 7 qc tools Knowledge and empliment 5s 4m 3retc.
- Q4. Paint defects
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed before Sep 2020. There were 4 interview rounds.
Interview Questionnaire
9 Questions
- Q1. What is the quality?
- Ans.
Quality is the degree of excellence of a product or service that meets or exceeds customer expectations.
Quality is meeting or exceeding customer expectations
It is the degree of excellence of a product or service
It involves meeting the required specifications and standards
It is achieved through continuous improvement and adherence to processes
Examples of quality include durability, reliability, and customer satisfaction
- Q2. The standard of something as measured against, other things of similar kind ,the degree of excellence of something that's a means of quality.
- Q3. What is time?
- Ans.
Time is a concept that measures the duration between events or moments.
Time is a continuous and irreversible flow of events.
It can be measured in seconds, minutes, hours, days, weeks, months, and years.
Time is relative and can be perceived differently by different people.
It is an essential factor in scheduling, planning, and organizing.
Examples of time-related measurements include clock time, calendar time, and elapsed
- Q4. Total productive maintenance
- Q5. How many experience do you
- Q6. 4 year in industrial development companies
- Q7. Why do you want to be aquality Inspector
- Ans. I can considering quality incoperates and the same time ensure products are safed and meet or exceed consumer expectations.
- Q8. What do you want to join quality team?
- Q9. I enjoy being busy and making sure that every product that goes out customers is the highest quality.
Interview Preparation Tips
Somic ZF Components Interview FAQs
Tell us how to improve this page.
Somic ZF Components Interviews By Designations
- Somic ZF Components Diploma Trainee Engineer Interview Questions
- Somic ZF Components CNC Operator Interview Questions
- Somic ZF Components CNC VMC Operator and Setter Interview Questions
- Somic ZF Components Design Engineer Interview Questions
- Somic ZF Components Executive Assistant to Director Interview Questions
- Somic ZF Components Management Trainee Finance Interview Questions
- Somic ZF Components Quality Inspector Interview Questions
- Somic ZF Components Sales Interview Questions
- Show more
Interview Questions for Popular Designations
- QC Inspector Interview Questions
- QA QC Inspector Interview Questions
- Quality Control Inspector Interview Questions
- Inspection Engineer Interview Questions
- Quality Assurance Inspector Interview Questions
- Quality Line Inspector Interview Questions
- Senior Quality Inspector Interview Questions
- QA Inspector Interview Questions
- Show more
Quality Inspector Interview Questions from Similar Companies
Somic ZF Components Quality Inspector Reviews and Ratings
based on 6 reviews
Rating in categories
|
Diploma Trainee Engineer
55
salaries
|  ₹1.4 L/yr - ₹2.5 L/yr |
|
Oprating Engineer
42
salaries
| ₹1.7 L/yr - ₹3.8 L/yr |
|
Junior Engineer
39
salaries
| ₹2.1 L/yr - ₹4.5 L/yr |
|
Assistant Manager
37
salaries
| ₹5.9 L/yr - ₹11 L/yr |
|
Senior Engineer
29
salaries
| ₹3.9 L/yr - ₹9 L/yr |
Bosch
Samvardhana Motherson Group
ZF Commercial Vehicle Control Systems
ZF Steering Gear
Calculate your in-hand salary
- Home >
- Interviews >
- Somic ZF Components Interview Questions >
- Somic ZF Components Quality Inspector Interview Questions
