AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Sipra Engineers Interview Questions and Answers
Sipra Engineers Interview Experiences
4 interviews found
(2 Questions)
- Q1. What is die casting
- Ans.
Die casting is a metal casting process that forces molten metal into a mold cavity under high pressure.
Metal is melted and forced into a mold cavity under high pressure
The mold cavity is created using two hardened steel dies
Commonly used for producing complex metal parts with high accuracy and surface finish
Examples include automotive components, electronic enclosures, and household appliances
- Q2. Types of die casting
- Ans.
Types of die casting include hot chamber, cold chamber, and vacuum die casting.
Hot chamber die casting involves injecting molten metal into a mold under high pressure.
Cold chamber die casting involves pouring molten metal into a chamber and then injecting it into the mold.
Vacuum die casting uses a vacuum to remove air from the mold before injecting molten metal.
Interview Preparation Tips
Quality Engineer Interview Questions asked at other Companies
Selected
I applied via Referral and was interviewed in Nov 2024. There were 2 interview rounds.
(1 Question)
- Q1. Can you provide details about your work experience at your previous company?
(1 Question)
- Q1. What is the design process for a die used in die casting?
Design Engineer Interview Questions asked at other Companies
Selected
I applied via Approached by Company and was interviewed in Apr 2023. There were 2 interview rounds.
(1 Question)
- Q1. Personal details self introduction
(2 Questions)
- Q1. Knowledge about processing parameters products quality
- Q2. Before company details
Oprating Engineer Interview Questions asked at other Companies
I applied via Approached by Company and was interviewed before Jun 2021. There were 3 interview rounds.
(2 Questions)
- Q1. Process & robot related questions
- Q2. Work history and utility questions
(2 Questions)
- Q1. 5s & safety, experience history, previous CTC,
- Q2. Approch for required CTC
- Ans.
Approach for determining required CTC
Research industry standards and salary ranges for similar positions
Consider the cost of living in the area where the job is located
Factor in the candidate's experience, skills, and education
Take into account any additional benefits or perks offered by the company
Be prepared to negotiate and adjust the offer based on the candidate's expectations
(1 Question)
- Q1. Interview by executive director, personal questions, confidence check,
Interview Preparation Tips
Production Engineer Interview Questions asked at other Companies
Sipra Engineers interview questions for popular designations
Jobs at Sipra Engineers
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Jul 2019. There were 3 interview rounds.
Interview Questionnaire
5 Questions
- Q1. What's process engineering works
- Ans.
Process engineering involves designing, optimizing, and managing industrial processes to improve efficiency and productivity.
Process engineering focuses on analyzing and improving processes in various industries such as manufacturing, chemical, and pharmaceutical.
It involves identifying bottlenecks, reducing waste, and implementing process improvements to enhance productivity.
Process engineers use tools like process fl...
- Q2. What's the difference between cp and pp
- Ans.
cp and pp are both commands in Unix-like operating systems, but they have different functionalities.
cp stands for 'copy' and is used to copy files or directories from one location to another.
pp stands for 'print and pause' and is used to print files with pagination, pausing after each page.
cp can be used to create a duplicate of a file or directory, while pp is used for printing files in a controlled manner.
Example: cp...
- Q3. What's control plan
- Ans.
A control plan is a documented procedure that outlines the steps and measures taken to ensure quality and consistency in a manufacturing process.
Control plans are commonly used in industries such as automotive, aerospace, and electronics.
They include details on the process steps, key characteristics, measurement methods, and acceptable tolerances.
Control plans help identify potential risks, prevent defects, and ensure ...
- Q4. What's smed
- Ans.
SMED stands for Single Minute Exchange of Die. It is a lean manufacturing technique used to reduce the time it takes to change over a production process.
SMED is used to minimize downtime during changeovers
It focuses on separating internal and external setup tasks
The goal is to convert as many internal setup tasks to external setup tasks
By reducing setup time, production flexibility and efficiency are improved
- Q5. What's capex
- Ans.
Capex stands for capital expenditure, which refers to the funds used by a company to acquire, upgrade, or maintain physical assets.
Capex is an investment made by a company to purchase or improve long-term assets such as buildings, equipment, or technology.
It is different from operational expenses (opex) which are ongoing costs to run the business.
Capex is typically planned and budgeted for in advance.
Examples of capex ...
Interview Preparation Tips
Skills evaluated in this interview
I applied via Recruitment Consulltant and was interviewed before Apr 2021. There were 3 interview rounds.
(7 Questions)
- Q1. What are your salary expectations?
- Q2. What is your family background?
- Q3. Share details of your previous job.
- Q4. Why should we hire you?
- Q5. Why are you looking for a change?
- Q6. What are your strengths and weaknesses?
- Q7. Tell me about yourself.
(2 Questions)
- Q1. As per your current profile
- Q2. Japanise Methodology like 4 M change, 5 S, IATF, OSASH, Safety, TPM, etc.
Interview Preparation Tips
salary no bar for good condidate,
answer all questions honesty because they are collect all information from your given details.
I applied via Walk-in and was interviewed in May 2022. There were 4 interview rounds.
(3 Questions)
- Q1. Production related questions
- Q2. Working flow rated questions
- Q3. Any other factory related
(1 Question)
- Q1. Salary related questions
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed before Jul 2023. There was 1 interview round.
(3 Questions)
- Q1. What are Iatf clauses
- Ans.
IATF clauses refer to specific requirements outlined in the International Automotive Task Force standards for automotive quality management systems.
IATF clauses are essential components of the quality management system for automotive companies.
They outline specific requirements that must be met in order to achieve IATF certification.
Examples of IATF clauses include requirements for leadership commitment, risk managemen...
- Q2. Insert terminology
- Q3. Mcodes g codes of cnc
- Ans.
M codes and G codes are commands used in CNC machines to control various functions and operations.
M codes are used for miscellaneous functions like stopping the machine or changing tools.
G codes are used for specific movements and operations like cutting, drilling, or milling.
Examples of M codes: M00 (program stop), M06 (tool change), M30 (end of program)
Examples of G codes: G00 (rapid positioning), G01 (linear interpo
Interview Preparation Tips
I applied via Company Website and was interviewed before Oct 2022. There were 4 interview rounds.
It was a easy round asked apti only
It was Easy-medium type round
(5 Questions)
- Q1. Last round asked hr and technical questions
- Q2. Asked DSA question
- Q3. Tell me about yourself
- Q4. Where do you want to see yourself after 5 years ?
- Q5. Why should I hire you ?
Interview Preparation Tips
Senior Engineer Interview Questions & Answers
Victora Auto Private Limited
Anonymous
posted on 8 May 2024
Selected
I applied via Walk-in and was interviewed in Nov 2023. There were 2 interview rounds.
(1 Question)
- Q1. Related experience
- Ans. What is your experience in this line . How many type knowledge of testing equipments
(1 Question)
- Q1. How much salary you preferred
- Ans. My expectations 30% high my current ctc
Sipra Engineers Interview FAQs
Tell us how to improve this page.
Sipra Engineers Interviews By Designations
Interview Questions for Popular Designations
- Associate Interview Questions
- Software Engineer Interview Questions
- Intern Interview Questions
- Software Developer Interview Questions
- Senior Associate Interview Questions
- Sales Executive Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Associate Software Engineer Interview Questions
- Show more
Sipra Engineers Interview Process
based on 6 interviews
Interview experience
Interview Questions from Similar Companies
Sipra Engineers Reviews and Ratings
based on 48 reviews
Rating in categories
|
Quality Engineer
21
salaries
|  ₹1.4 L/yr - ₹4.3 L/yr |
|
Design Manager
14
salaries
| ₹5 L/yr - ₹6 L/yr |
|
Production Engineer
12
salaries
| ₹2.2 L/yr - ₹3.6 L/yr |
|
Design Engineer
7
salaries
| ₹2.5 L/yr - ₹4.8 L/yr |
|
Production Manager
7
salaries
| ₹4 L/yr - ₹10.3 L/yr |
Knorr-Bremse
Greaves Cotton
Sanden Vikas
Victora Auto Private Limited
- Home >
- Interviews >
- Sipra Engineers Interview Questions
