Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Sintex Industries Team. If you also belong to the team, you can get access from here

Sintex Industries Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Sintex Industries Quality Engineer Interview Questions and Answers

Updated 1 Jul 2024

Sintex Industries Quality Engineer Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Questions on career
  • Q2. Question in documentation SOPs writing

Interview Preparation Tips

Interview preparation tips for other job seekers - study blow and roational molding

Interview Questionnaire 

3 Questions

  • Q1. What is injection moulding
  • Ans. 

    Injection moulding is a manufacturing process used to produce parts by injecting molten material into a mould.

    • Molten material is injected into a mould cavity

    • The material cools and solidifies, taking the shape of the mould

    • Commonly used for producing plastic parts

    • Used in various industries such as automotive, medical, and consumer goods

  • Answered by AI
  • Q2. Draw diagram of injection moulding
  • Ans. 

    Injection moulding is a manufacturing process used to produce parts by injecting molten material into a mould.

    • The material is melted in a heated barrel and then injected into a mould cavity

    • The mould is cooled to solidify the part and then opened to eject the finished product

    • Common materials used in injection moulding include thermoplastics, thermosets, and elastomers

  • Answered by AI
  • Q3. Whay you want a job

Quality Engineer Interview Questions Asked at Other Companies

asked in MM AUTO
Q1. What is MSA and addition of msa version, type of msa ,what differ ... read more
asked in MM AUTO
Q2. What is 7 QC tool,parito analysis,xchart and r chart explain ,why ... read more
Q3. If a monkey eat 6 apples more than the previous day and complete ... read more
Q4. What is the Physical & Chemical test of Steel Reinforcement?
asked in MM AUTO
Q5. what is IATF audit , cause of IATF , relationship between for IAT ... read more

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. 7QC tools, Drawing reading, material composition, basic NDT knowledge, ASTM,ASME knowledge, SPC,MSA, Vendor Audit and evaluation

I applied via Referral and was interviewed before Jul 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Basic knowledge of role based on experience level

Interview Preparation Tips

Interview preparation tips for other job seekers - Please go in deep for technical knowledge for interview of any role in ABB India limited
Less knowledge will result in rejection
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed before Jan 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

In about 5s our education subject core related questions also EHS related questions

Round 2 - Technical 

(10 Questions)

  • Q1. Technical questions as like Subject core experience based questions
  • Q2. Ourself information, family background, about work experience, also about 5s system,EHS system,7Qc tools ,5 core tool, about 8D ,about Lean,kizen. All about work experience, Technical questions about core ...
  • Q3. New challenges accepteble capacity all over company related subjects core Questions, about working in rotational shift working
  • Q4. Family background, salary related conformation, company facilities, working hours in company, traveling facilities food facilities also about girls safety
  • Q5. Based on subject core our course related,what about work experience in Quality field, incoming inspection preinspction,final inspection
  • Q6. Working experience, about QA tools vernier caliper, micrometre least count uses, about documents certificate of conference,also MRB system,About Rejected part hou to take decision, sampling inspection bas...
  • Q7. All about work experience, family background, about our work experience,work strategy, customer complaint handling problem in Quality, Quality issues
  • Q8. QA documents ,about 5 core tools, 8D , problem solving method,4m ,3m , about Lean, working experience, working hours ,new challenges,about salary expectation.
  • Q9. Family background, comfortable for rotational shift working, about company related rules and regulations, company criteria for future in post , opportunity, about salary expectation
  • Q10. Family background, comfortable for rotational shift working, about company related rules and regulations, company criteria for future opportunities, about salary expectation
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is the least count of micrometre
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the scale of the micrometer.

    • The least count of a micrometer is typically 0.01 mm or 0.001 mm, depending on the type of micrometer.

    • It is important to understand the least count in order to accurately measure dimensions using a micrometer.

    • For example, a micrometer with a least count of 0.01 mm can measure up to two decimal places, while a mic...

  • Answered by AI
  • Q2. What is the standard of mill speed of every dia.
  • Ans. 

    The standard mill speed varies depending on the diameter of the mill.

    • The standard mill speed for a specific diameter can be calculated using the formula: Speed = (Diameter x π x RPM) / 1000

    • Different mills may have different standard speeds based on their size and purpose

    • It is important to refer to the manufacturer's guidelines for the recommended mill speed for each diameter

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Goods
Round 1 - Technical 

(1 Question)

  • Q1. Quality tools, materials,

Interview Preparation Tips

Interview preparation tips for other job seekers - Good technical knowledge, Good communication skill required
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Interviewer not had enough knowledge, so it was so easy. Last up only in 10 mints
Round 2 - Technical 

(2 Questions)

  • Q1. Again same interviewer, same chu*iyapa
  • Q2. How much salary you want ? This question was in technical interview 😆😅😂

Interview Preparation Tips

Interview preparation tips for other job seekers - Do not try in ACE, never.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Quantitative aptitude questions, blood relation questions

Round 3 - HR 

(3 Questions)

  • Q1. What is your expected salery if selected?
  • Ans. 

    My expected salary is in line with industry standards and commensurate with my experience and qualifications.

    • I have researched the average salary range for Quality Engineers in this region

    • I am open to negotiation based on the specific responsibilities and benefits offered

    • I am looking for a fair and competitive salary package

    • Based on my experience and qualifications, I am expecting a salary range of $X to $Y

  • Answered by AI
  • Q2. When you will join company if selected?
  • Q3. Can you join immediately?

Interview Preparation Tips

Interview preparation tips for other job seekers - Good job for freshers. Fast learning & on job training.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I appeared for an interview in Aug 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. What is the 7QC tools?
  • Ans. 

    The 7QC tools are a set of quality control tools used for process improvement and problem-solving in manufacturing and other industries.

    • Check sheets: Used to collect and organize data for analysis.

    • Cause-and-effect diagrams (Fishbone diagrams): Used to identify and analyze potential causes of a problem.

    • Control charts: Used to monitor process variation over time.

    • Histograms: Used to show the frequency distribution of a se...

  • Answered by AI
  • Q2. What is the 8D methodology?
  • Ans. 

    The 8D methodology is a problem-solving approach used to identify, correct, and prevent recurring problems.

    • 8D stands for 8 disciplines, each representing a step in the problem-solving process

    • It involves creating a team, defining the problem, implementing short-term containment actions, identifying root causes, implementing permanent corrective actions, and preventing recurrence

    • Examples of tools used in 8D methodology i...

  • Answered by AI
  • Q3. What is the 8QB ? Typs
  • Ans. 

    8D is a problem-solving methodology used in quality management to identify, correct, and prevent recurring problems.

    • 8D stands for Eight Disciplines

    • It is a structured problem-solving process typically used in the automotive industry

    • Each discipline represents a step in the process, from defining the problem to implementing long-term solutions

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. What about family?
  • Q2. Self intro
Round 3 - Aptitude Test 

Any improvement in your industry

Round 4 - Aptitude Test 

Did you profit for any Quality process

Sintex Industries Interview FAQs

How many rounds are there in Sintex Industries Quality Engineer interview?
Sintex Industries interview process usually has 1 rounds. The most common rounds in the Sintex Industries interview process are Technical.
What are the top questions asked in Sintex Industries Quality Engineer interview?

Some of the top questions asked at the Sintex Industries Quality Engineer interview -

  1. What is injection mould...read more
  2. Draw diagram of injection mould...read more
  3. question in documentation SOPs writ...read more

Tell us how to improve this page.

Sintex Industries Quality Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Sintex Industries Quality Engineer Salary
based on 5 salaries
₹1.8 L/yr - ₹3.6 L/yr
17% less than the average Quality Engineer Salary in India
View more details

Sintex Industries Quality Engineer Reviews and Ratings

based on 2 reviews

3.7/5

Rating in categories

5.0

Skill development

3.6

Work-life balance

3.2

Salary

3.2

Job security

3.0

Company culture

2.7

Promotions

3.6

Work satisfaction

Explore 2 Reviews and Ratings
Executive
93 salaries
unlock blur

₹2.3 L/yr - ₹5.7 L/yr

Senior Executive
87 salaries
unlock blur

₹3.5 L/yr - ₹7.2 L/yr

Deputy Manager
60 salaries
unlock blur

₹5.5 L/yr - ₹11 L/yr

Assistant Manager
44 salaries
unlock blur

₹4.8 L/yr - ₹8.5 L/yr

Junior Executive
36 salaries
unlock blur

₹1.2 L/yr - ₹3.5 L/yr

Explore more salaries
Compare Sintex Industries with

Thermax Limited

4.1
Compare

ABB

4.1
Compare

Tractors and Farm Equipment

4.0
Compare

Isgec Heavy Engineering

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview