Premium Employer

i

This company page is being actively managed by SHRI LAKSHMI STEEL SUPPLIERS Team. If you also belong to the team, you can get access from here

SHRI LAKSHMI STEEL SUPPLIERS Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

SHRI LAKSHMI STEEL SUPPLIERS Loading Unloading Supervisor Interview Questions and Answers

Updated 25 Apr 2024

SHRI LAKSHMI STEEL SUPPLIERS Loading Unloading Supervisor Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Oct 2023. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. What about previous work experience
  • Ans. Tell something good about previous company
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Simply explain the experience

Interview questions from similar companies

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. ABOUT URS PERSONAL DATA AND PROFFEISIONAL DATA
Round 3 - Technical 

(1 Question)

  • Q1. About urs shift and problems in urs shift.
Round 4 - HR 

(1 Question)

  • Q1. Salary negotiation,transportation

Interview Preparation Tips

Interview preparation tips for other job seekers - nothing worried about it.keep simple and
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Oct 2022. There were 3 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Wt is ndt testing
  • Ans. 

    NDT testing, or non-destructive testing, is a method used to evaluate the properties of a material, component, or system without causing damage.

    • NDT testing is used to detect defects or inconsistencies in materials or structures.

    • Common methods of NDT testing include ultrasonic testing, radiographic testing, magnetic particle testing, and dye penetrant testing.

    • NDT testing is often used in industries such as aerospace, au...

  • Answered by AI
  • Q2. Tell me some ndt standards and acceptances
  • Ans. 

    NDT standards and acceptances are crucial for ensuring the quality and safety of engineering projects.

    • ASNT (American Society for Nondestructive Testing) standards are widely used in the industry

    • ISO 9712 is an international standard for qualification and certification of NDT personnel

    • Acceptance criteria for NDT inspections are often specified in codes such as ASME Boiler and Pressure Vessel Code

    • ASTM E1444/E1444M is a st...

  • Answered by AI
  • Q3. Wt is defarance between PAUT and Narmal UT
  • Ans. 

    PAUT is an advanced form of UT that uses multiple elements to inspect a larger area in a single scan, while normal UT uses a single element probe for inspection.

    • PAUT uses multiple elements to inspect a larger area in a single scan, increasing efficiency and coverage.

    • Normal UT uses a single element probe for inspection, limiting the area that can be scanned at once.

    • PAUT provides better imaging and data collection capabi...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. How many years expearins
  • Ans. 

    I have 10 years of experience in the field.

    • 10 years of experience in senior engineering roles

    • Extensive knowledge and skills acquired over the years

    • Proven track record of successful projects completed

    • Experience in leading teams and mentoring junior engineers

  • Answered by AI
  • Q2. What reoson for leaved privious company
  • Ans. 

    I left my previous company to pursue new challenges and opportunities for growth.

    • Seeking new challenges and opportunities for growth

    • Desire for career advancement

    • Change in company culture or management

    • Relocation to a different city or country

    • Better work-life balance

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Salory expertation

I applied via Referral

Round 1 - Group Discussion 

Discussion with, MD, COO, Legal Advisor

Round 2 - One-on-one 

(2 Questions)

  • Q1. In one round discussion I was selected
  • Q2. They wanted to know my experience in Govt. I possessed 38 years is service all over the in various departments

Interview Preparation Tips

Interview preparation tips for other job seekers - Be specific in answering to the questions

I applied via Naukri.com and was interviewed in Jun 2021. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. My Job responsibilities in current company
  • Ans. 

    In my current role, my job responsibilities include managing a team, overseeing daily operations, and developing strategies to improve efficiency and productivity.

    • Managing a team of employees

    • Overseeing daily operations and ensuring smooth workflow

    • Developing and implementing strategies to improve efficiency and productivity

    • Monitoring and evaluating performance of team members

    • Collaborating with other departments to achie...

  • Answered by AI
  • Q2. Experience of working on S7-300 i.e. How can you create logic by giving some case
  • Ans. 

    I have extensive experience working on S7-300 and have created complex logic using it.

    • I have worked on S7-300 for over 5 years and have created various logic for different applications.

    • I am proficient in programming languages such as Ladder Logic, Function Block Diagram, and Structured Text.

    • One example of a project I worked on involved creating a control system for a conveyor belt using S7-300.

    • I have also worked on pro...

  • Answered by AI
  • Q3. Cranes operations
  • Q4. Working principle of servo valves
  • Ans. 

    Servo valves are electro-hydraulic valves that control the flow of hydraulic fluid to an actuator.

    • Servo valves use a spool and sleeve mechanism to control the flow of hydraulic fluid.

    • They are used in high-precision applications such as aerospace and industrial automation.

    • The valve's position is controlled by an electrical signal, which adjusts the flow of hydraulic fluid.

    • They are capable of very precise control, with a...

  • Answered by AI
  • Q5. At last,Tell me about yourself
  • Ans. 

    Experienced manager with a strong background in team leadership and project management.

    • 10+ years of experience in managing cross-functional teams

    • Proven track record of successfully delivering projects on time and within budget

    • Strong communication and interpersonal skills

    • Ability to motivate and inspire team members

    • Implemented process improvements resulting in increased efficiency

    • Led a team of 20 employees to achieve a 2...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Quite good
Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I appeared for an interview in Feb 2025, where I was asked the following questions.

  • Q1. What are Cp and Cpk, and how are they used in process capability analysis?
  • Ans. 

    Cp and Cpk are metrics used to assess process capability and performance in manufacturing and quality control.

    • Cp (Process Capability) measures the potential capability of a process by comparing the width of the process spread to the width of the specification limits.

    • Cpk (Process Capability Index) measures how centered the process is within the specification limits, taking into account the mean and variability.

    • A Cp valu...

  • Answered by AI
  • Q2. What is the difference between specification limits and control limits?
  • Ans. 

    Specification limits define acceptable product performance, while control limits monitor process stability.

    • Specification limits are set by customer requirements or industry standards, e.g., a product must be between 10-20 mm.

    • Control limits are statistical boundaries derived from process data, e.g., a control chart may show limits at 12-18 mm.

    • Specification limits indicate what is acceptable; control limits indicate how ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Apply only if you have strong references. Selection at Tata Steel is not based solely on merit. Deserving candidates who are not selected will be asked questions that are obvious and difficult for them to answer, while non-deserving candidates who are selected will be posed very easy questions that they are certain to answer correctly.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Where you have got challenges in your profile
  • Q2. What skills do you have to help come out from that situations

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls be focused on your work profile brick by brick they will ask you and be confident very supportive interviewers here .

Interview Questionnaire 

3 Questions

  • Q1. What advantage of AMLC in ccm , and how do improvements in cast bloom or billets
  • Ans. 

    AMLC provides advantages in CCM and improvements in cast bloom or billets.

    • AMLC helps in reducing defects in cast blooms or billets

    • It improves the quality of the final product

    • AMLC ensures better control over the casting process

    • It helps in reducing the overall production cost

    • AMLC also helps in improving the yield of the casting process

  • Answered by AI
  • Q2. What required or norms for mould casting powder
  • Ans. 

    Mould casting powder requires specific norms to ensure quality and safety.

    • The powder should be stored in a dry and cool place to prevent moisture absorption.

    • The mixing ratio of the powder with water should be strictly followed.

    • The mould should be properly prepared and coated with a release agent before pouring the mixture.

    • The casting process should be done in a well-ventilated area to avoid inhalation of harmful fumes.

    • ...

  • Answered by AI
  • Q3. What types of defect create from primary and secondary cooling
  • Ans. 

    Defects in primary and secondary cooling can lead to various types of issues in the final product.

    • Primary cooling defects include shrinkage, porosity, and hot tears.

    • Secondary cooling defects include cracks, segregation, and inclusions.

    • Shrinkage occurs when the metal solidifies and contracts, leaving voids in the final product.

    • Porosity is caused by gas bubbles getting trapped in the metal during solidification.

    • Hot tears...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - A lot of steel products in market ,and many choices for customers in market, so try to make our product best quality .
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is power factor?
  • Ans. 

    Power factor is the ratio of real power to apparent power in an AC circuit.

    • It is a measure of how efficiently electrical power is being used.

    • A power factor of 1 means all the power is being used effectively.

    • A power factor less than 1 means some power is being wasted.

    • Capacitors and inductors can be used to improve power factor.

    • Power factor is important for energy efficiency and cost savings.

  • Answered by AI
  • Q2. Gave answer in confident
Round 3 - HR 

(2 Questions)

  • Q1. Why u want to join this company?
  • Q2. Because i am fresher

I applied via Walk-in and was interviewed before Aug 2020. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. I had given interview for project management.
  • Q2. Greenfield project
  • Q3. Rotating equipment alignment
  • Q4. Flushing and pickling process in hydraulic
  • Ans. 

    Flushing and pickling are processes used to clean and protect hydraulic systems.

    • Flushing involves removing contaminants and debris from the system using a flushing fluid.

    • Pickling involves applying a protective coating to the system to prevent corrosion.

    • Both processes are important for maintaining the performance and longevity of hydraulic systems.

    • Examples of flushing fluids include water, solvents, and specialized flus...

  • Answered by AI
  • Q5. Preventive and breakdown maintenance difference
  • Ans. 

    Preventive maintenance is planned maintenance to prevent breakdowns, while breakdown maintenance is repairing equipment after it has failed.

    • Preventive maintenance is scheduled and proactive

    • Breakdown maintenance is reactive and occurs after equipment failure

    • Preventive maintenance reduces downtime and increases equipment lifespan

    • Breakdown maintenance can be costly and cause production delays

    • Examples of preventive mainten...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give answer with confidence

SHRI LAKSHMI STEEL SUPPLIERS Interview FAQs

How many rounds are there in SHRI LAKSHMI STEEL SUPPLIERS Loading Unloading Supervisor interview?
SHRI LAKSHMI STEEL SUPPLIERS interview process usually has 1 rounds. The most common rounds in the SHRI LAKSHMI STEEL SUPPLIERS interview process are HR.

Tell us how to improve this page.

SHRI LAKSHMI STEEL SUPPLIERS Loading Unloading Supervisor Interview Process

based on 1 interview

Interview experience

3
  
Average
View more
Join SHRI LAKSHMI STEEL SUPPLIERS Your Trusted Steel Partner

Interview Questions from Similar Companies

ArcelorMittal Interview Questions
4.1
 • 29 Interviews
Arjas Steel Interview Questions
4.2
 • 18 Interviews
Kalyani Forge Interview Questions
3.4
 • 13 Interviews
Srmb Steel Interview Questions
3.4
 • 9 Interviews
View all
Senior Sales Executive
39 salaries
unlock blur

₹3 L/yr - ₹5.5 L/yr

Area Sales Manager
26 salaries
unlock blur

₹3.8 L/yr - ₹6.5 L/yr

Billing Executive
22 salaries
unlock blur

₹2.4 L/yr - ₹3.5 L/yr

Executive Accountant
15 salaries
unlock blur

₹3 L/yr - ₹4 L/yr

Sales Executive
14 salaries
unlock blur

₹2.2 L/yr - ₹4.5 L/yr

Explore more salaries
Compare SHRI LAKSHMI STEEL SUPPLIERS with

ArcelorMittal

4.1
Compare

Tata Steel Downstream Products

3.7
Compare

Tata BlueScope Steel

3.7
Compare

Captain Steel India Limited

4.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview