Upload Button Icon Add office photos

Filter interviews by

Schindler Graduate Engineer Trainee (Get) Interview Questions and Answers

Updated 22 Jun 2021

Schindler Graduate Engineer Trainee (Get) Interview Experiences

1 interview found

I applied via campus placement at National Institute of Technology (NIT), Jamshedpur and was interviewed before May 2020. There were 5 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What do you know about the company?
  • Q2. Why should people with technical background be hired for sales and accounting roles?
  • Q3. Details of project done for major project and Internship

Interview Preparation Tips

Interview preparation tips for other job seekers - They take a lot of rounds and very thoroughly screen the candidates. The interviewer asked questions from all over the place. They tried to throw me off a lot. One question is HR and suddenly the next question is technical. Luckily I was able to answer most of the questions to the best of my capability. For every question be it technical or HR I had to give practical examples for whatever I am explaining. They also asked me quite a lot of questions related to my project in college and during internship. Definitely check the salary and job description before applying. They dont do any changes after

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

Technical+ few Aptitude

Round 2 - Group Discussion 

EV,AI .The GD Round was conducted around 15 mins where each one of them given chance to speak

Round 3 - One-on-one 

(2 Questions)

  • Q1. What is Shear force and Bending Moment Diagrams
  • Ans. 

    Shear force and Bending Moment Diagrams are graphical representations of the internal forces acting on a beam.

    • Shear force diagram shows the variation of shear force along the length of a beam.

    • Bending moment diagram shows the variation of bending moment along the length of a beam.

    • Shear force is the force that acts parallel to the cross-section of the beam, while bending moment is the moment that causes bending of the be...

  • Answered by AI
  • Q2. Draw the Rankine Cycle
  • Ans. 

    Rankine Cycle is a thermodynamic cycle used in steam power plants to generate electricity.

    • Rankine Cycle consists of four main components: a boiler, turbine, condenser, and pump.

    • The cycle starts with the boiler where water is heated to produce high-pressure steam.

    • The high-pressure steam then enters the turbine, where it expands and produces mechanical work.

    • After exiting the turbine, the steam enters the condenser where ...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Dec 2024.

Round 1 - Aptitude Test 

Logical reasoning
Numerical ability
Situational based Mcqs
Domain specific Technical Mcqs

Round 2 - Group Discussion 

Prepare well for this one.
Topic : Recent Trending Topics

Round 3 - HR 

(2 Questions)

  • Q1. Based On Resume
  • Q2. Based on resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Grate place to start you career if you are from core domain of engineering.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Artificial intelligence

Interview Preparation Tips

Interview preparation tips for other job seekers - Study basics and become self awared
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Group Discussion 

Topics were generic available on any website for GD

Round 2 - Technical 

(3 Questions)

  • Q1. Prepare your projects. Know basics rather than focusing on facts.
  • Q2. Types of compressors,
  • Ans. 

    Types of compressors include reciprocating, rotary, centrifugal, and axial compressors.

    • Reciprocating compressors use a piston to compress the gas.

    • Rotary compressors use rotating impellers or screws to compress the gas.

    • Centrifugal compressors use centrifugal force to compress the gas.

    • Axial compressors use a series of rotating and stationary blades to compress the gas.

  • Answered by AI
  • Q3. Hobbies and why do you like them

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well and be clear
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It was aptitude plus computer fundamentals which include oops, dbms, os and some questions based on algorithms

Round 2 - Interview 

(2 Questions)

  • Q1. Tell me what do you know about john deere
  • Q2. What is one subject you would never want to study again
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via AmbitionBox and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Discussed about which technology were developed more 2024

Round 3 - HR 

(1 Question)

  • Q1. Self introduction Why you choosing this field What are the goals you were fixed

Interview Preparation Tips

Interview preparation tips for other job seekers - Is one of the good process I loved it.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Sep 2022. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. About engineering drawings
  • Q2. Other drawing symbols
  • Q3. Type of stresses, how does it work?
  • Ans. 

    Stresses can be of various types such as tensile, compressive, shear, etc. and they affect the behavior of materials under load.

    • Tensile stress occurs when a material is stretched or pulled apart, like when you pull a rubber band.

    • Compressive stress occurs when a material is squeezed or compressed, like when you push a spring.

    • Shear stress occurs when a material is twisted or sheared, like when you cut a piece of paper wi...

  • Answered by AI
  • Q4. Type of heat transfers
  • Ans. 

    There are three types of heat transfer: conduction, convection, and radiation.

    • Conduction is the transfer of heat through a material without any movement of the material itself.

    • Convection is the transfer of heat through a fluid (liquid or gas) due to the movement of the fluid.

    • Radiation is the transfer of heat through electromagnetic waves, such as from the sun or a fire.

    • Examples of conduction include touching a hot stov...

  • Answered by AI
  • Q5. Tell me about your project briefly?

Interview Preparation Tips

Interview preparation tips for other job seekers - Must have basic knowledge about the subjects which your studied is important
Round 1 - One-on-one 

(1 Question)

  • Q1. Technical questions of mechanical engineering

Interview Preparation Tips

Interview preparation tips for other job seekers - go through the basics of mechanical engineering

I applied via Company Website and was interviewed in Dec 2021. There were 2 interview rounds.

Round 1 - Assignment 

Assignment is totally mechanical based, it have a basic sizing and design question that we studied during engineering

Round 2 - One-on-one 

(2 Questions)

  • Q1. Heat transfer, Fluid mechanics and process calculator question was asked during interview and it all based on my job profile
  • Q2. Discuss about the be project

Interview Preparation Tips

Interview preparation tips for other job seekers - Clear your basis before joining Thermax

Tell us how to improve this page.

Schindler Graduate Engineer Trainee (Get) Reviews and Ratings

based on 3 reviews

4.1/5

Rating in categories

4.0

Skill development

3.8

Work-life balance

4.2

Salary

4.0

Job security

4.1

Company culture

4.1

Promotions

4.1

Work satisfaction

Explore 3 Reviews and Ratings
Customer Engineer
317 salaries
unlock blur

₹2.5 L/yr - ₹6.6 L/yr

Assistant Manager
163 salaries
unlock blur

₹5.2 L/yr - ₹17.2 L/yr

Accounts Manager
143 salaries
unlock blur

₹6 L/yr - ₹22 L/yr

Senior Engineer
128 salaries
unlock blur

₹4 L/yr - ₹15 L/yr

Senior Customer Engineer
99 salaries
unlock blur

₹3.8 L/yr - ₹9 L/yr

Explore more salaries
Compare Schindler with

Otis Elevator

4.0
Compare

KONE

4.1
Compare

TK Elevator

3.9
Compare

Mitsubishi Electric

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview