Upload Button Icon Add office photos

Samsung E&A

Compare button icon Compare button icon Compare

Filter interviews by

Samsung E&A Mechanical Supervisor Interview Questions, Process, and Tips

Updated 17 Apr 2023

Top Samsung E&A Mechanical Supervisor Interview Questions and Answers

Samsung E&A Mechanical Supervisor Interview Experiences

3 interviews found

I applied via Approached by Company and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How align the rotating equipment's ?
  • Ans. 

    Rotating equipment alignment is achieved by using precision measurement tools and techniques to ensure proper positioning and parallelism.

    • Use laser alignment systems to measure and correct misalignment

    • Check and adjust coupling alignment to minimize vibration and maximize efficiency

    • Utilize dial indicators and feeler gauges to measure and adjust shaft runout

    • Consider thermal growth and compensate for it during alignment

    • Pe...

  • Answered by AI
  • Q2. How many type of Centrifugal pump ?
  • Ans. 

    There are several types of centrifugal pumps used in various applications.

    • Single-stage centrifugal pump

    • Multi-stage centrifugal pump

    • Axial flow centrifugal pump

    • Mixed flow centrifugal pump

    • Submersible centrifugal pump

    • Self-priming centrifugal pump

    • Vertical centrifugal pump

    • Horizontal centrifugal pump

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep cool and silent with follow the safety Rules.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
-
Result
Not Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How many years experience and do you working in compressor?
  • Q2. Yes, I have experience around 13 years in mechanical static and rotating equipment and I have previous experience in compressor

Mechanical Supervisor Interview Questions Asked at Other Companies

Q1. What you will do if any person injured inside confine space?
Q2. What you will do in emergency alarm in oil and gas company?
Q3. If you are doing work outside somewhere and while working, there ... read more
Q4. The steam turbines rotor it's running time which bearing take loa ... read more
Q5. what should be the approach temperature range for a water-cooled ... read more

I applied via Walk-in

Round 1 - Technical 

(2 Questions)

  • Q1. What is the pump in Mechanical and process?
  • Ans. 

    A pump is a mechanical device that is used to move fluids from one place to another in a process.

    • Pumps are used in various industries such as oil and gas, chemical, water treatment, and food processing.

    • They can be classified into different types such as centrifugal, positive displacement, and jet pumps.

    • Pumps can be powered by electricity, diesel, or steam.

    • Examples of pumps include water pumps, fuel pumps, and vacuum pu

  • Answered by AI
  • Q2. When we require the positive pressure and require transfer the liquid and gas that machine we are calling the pump.
Round 2 - Technical 

(2 Questions)

  • Q1. How many tipes of metal?
  • Ans. 

    There are numerous types of metals, each with unique properties and characteristics.

    • Metals can be categorized into ferrous and non-ferrous metals.

    • Ferrous metals include iron, steel, and cast iron.

    • Non-ferrous metals include aluminum, copper, brass, and bronze.

    • Other types of metals include precious metals like gold and silver, and rare metals like titanium and tungsten.

    • Each metal has its own unique properties, such as st

  • Answered by AI
  • Q2. Two tipes 1. Ferrous 2 Now Ferrous metal
  • Ans. 

    Ferrous metals contain iron while non-ferrous metals do not.

    • Ferrous metals are magnetic and prone to rusting

    • Examples of ferrous metals include steel and cast iron

    • Non-ferrous metals are more resistant to corrosion

    • Examples of non-ferrous metals include aluminum and copper

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep confident on job than start the work.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed in Aug 2024. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. We will ask regarding company HR policy as per country labour law

Interview Preparation Tips

Interview preparation tips for other job seekers - Experience, sound knowledge and skills it will give the better opportunity for your future career
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - HR 

(5 Questions)

  • Q1. Whats your work Experiences. How many shutdown you done?
  • Ans. I have 5 years experience in oil and gas industry with 6 shutdown experience.
  • Answered Anonymously
  • Q2. What is blinding
  • Ans. 

    Blinding is a technique used in research studies to prevent bias by keeping participants or researchers unaware of certain information.

    • Blinding can be single-blind (participants are unaware) or double-blind (both participants and researchers are unaware)

    • Blinding helps to reduce bias and ensure the validity of study results

    • Example: In a drug trial, participants may be given either the actual drug or a placebo without kn

  • Answered by AI
  • Q3. What you know about permits
  • Ans. 

    Permits are legal documents that allow individuals or companies to perform certain activities or projects within a specified timeframe and under specific conditions.

    • Permits are required for various activities such as construction, demolition, renovation, and environmental impact assessments.

    • They ensure that the work being done complies with local regulations and safety standards.

    • Permits may be issued by government agen...

  • Answered by AI
  • Q4. Maintenance procedures of heat exchangers
  • Ans. 

    Maintenance procedures for heat exchangers involve regular cleaning, inspection, and testing to ensure optimal performance.

    • Regularly clean the heat exchanger tubes to remove any buildup of debris or scale

    • Inspect the heat exchanger for leaks, corrosion, or other signs of damage

    • Test the heat exchanger for efficiency and performance using pressure tests or thermal imaging

    • Replace any worn out or damaged parts to prevent fu...

  • Answered by AI
  • Q5. Types of gaskets
  • Ans. 

    Gaskets are mechanical seals used to prevent leakage between two surfaces.

    • Types: Spiral Wound, Ring Joint, Camprofile, Double Jacketed, Kammprofile, Rubber, Cork, Metal Jacketed, Non-Asbestos

    • Materials: Rubber, Cork, Metal, Non-Asbestos, PTFE, Graphite, Silicone, Neoprene

    • Used in various industries like automotive, aerospace, oil & gas, plumbing, etc.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in May 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(8 Questions)

  • Q1. About strl erection
  • Q2. About manpower handeling
  • Q3. About codes and standards
  • Q4. About raw material
  • Q5. About contractor handling
  • Q6. About hot work and height job executing
  • Q7. About erection procedures of structure
  • Q8. About safety precautions during hot job

Interview Preparation Tips

Topics to prepare for Worley Mechanical Engineer interview:
  • Fabricatoin
  • Erection
Interview preparation tips for other job seekers - I would like to continue my job in structural fabrication and erection.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. Fire fiting HVAC System
  • Q2. How many pressure fire line
  • Ans. 

    The number of pressure fire lines can vary depending on the specific requirements of the system and facility.

    • The number of pressure fire lines is determined by the size and layout of the facility.

    • Pressure fire lines are typically installed in areas where there is a high risk of fire, such as industrial plants or commercial buildings.

    • The number of pressure fire lines may also be influenced by local fire safety regulatio...

  • Answered by AI
  • Q3. What is hvac requmamt neme
  • Ans. 

    HVAC requirements refer to the specifications and standards needed for heating, ventilation, and air conditioning systems in a building or facility.

    • HVAC requirements include proper sizing of equipment to meet the heating and cooling needs of a space

    • They also involve ensuring proper ventilation to maintain indoor air quality

    • Compliance with building codes and regulations is essential for HVAC systems

    • Regular maintenance a...

  • Answered by AI
  • Q4. How many sprlar tipe
  • Ans. 

    The question is unclear and does not make sense. It seems to be a typo or a mistake.

    • The question may be asking about a specific type of equipment or tool, but it is not clear.

    • It is important to ask for clarification or more information to provide an accurate answer.

    • Without more context, it is impossible to determine what 'sprlar tipe' refers to.

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Firefiting hvac Systems
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Not Selected

I applied via Naukri.com and was interviewed before Jun 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Define SFD ,BMD
  • Ans. 

    SFD stands for Shear Force Diagram and BMD stands for Bending Moment Diagram in structural analysis.

    • SFD shows the variation of shear force along the length of a beam or structure.

    • BMD shows the variation of bending moment along the length of a beam or structure.

    • Both diagrams are essential for analyzing the internal forces in a structure.

    • They are commonly used in civil and mechanical engineering for designing and analyzi...

  • Answered by AI
  • Q2. Calculate Thrust forces for beam
  • Ans. 

    Thrust forces for beams can be calculated using equations of equilibrium and considering external loads.

    • Calculate the sum of all external forces acting on the beam.

    • Determine the direction of the forces (compression or tension) based on the beam's support conditions.

    • Apply equations of equilibrium to calculate the thrust forces at different points along the beam.

    • Consider any distributed loads or moments that may affect t...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Aug 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What's the alignment methods
  • Ans. 

    Alignment methods are techniques used to ensure proper positioning and orientation of mechanical components.

    • Common alignment methods include laser alignment, dial indicator alignment, and straight edge alignment.

    • Laser alignment uses a laser beam to measure and adjust the alignment of components.

    • Dial indicator alignment uses a dial gauge to measure the alignment of components.

    • Straight edge alignment involves using a str...

  • Answered by AI
  • Q2. Vibration analysis basics

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare on the resume data klsdfkldklnfgsdklngklavnsklfnvfioj

I applied via Approached by Company and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Mechanical Engineer in Experience 15 years India and gulf
  • Q2. Mechanical Engineer good

Interview Preparation Tips

Interview preparation tips for other job seekers - Mechanical Engineer in Experience 15 years in India and gulf Experience

Samsung E&A Interview FAQs

How many rounds are there in Samsung E&A Mechanical Supervisor interview?
Samsung E&A interview process usually has 2 rounds. The most common rounds in the Samsung E&A interview process are Technical and Resume Shortlist.
What are the top questions asked in Samsung E&A Mechanical Supervisor interview?

Some of the top questions asked at the Samsung E&A Mechanical Supervisor interview -

  1. What is the pump in Mechanical and proce...read more
  2. How many type of Centrifugal pum...read more
  3. How align the rotating equipment'...read more

Tell us how to improve this page.

Samsung E&A Mechanical Supervisor Interview Process

based on 1 interview

1 Interview rounds

  • Technical Round
View more

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 737 Interviews
Tata Projects Interview Questions
4.2
 • 422 Interviews
Thermax Limited Interview Questions
4.2
 • 247 Interviews
Adani Group Interview Questions
3.9
 • 186 Interviews
Saint-Gobain Interview Questions
4.0
 • 172 Interviews
AECOM Interview Questions
4.2
 • 114 Interviews
BHEL Interview Questions
4.1
 • 109 Interviews
Worley Interview Questions
4.2
 • 109 Interviews
AtkinsRealis Interview Questions
4.0
 • 85 Interviews
View all

Samsung E&A Mechanical Supervisor Reviews and Ratings

based on 6 reviews

4.5/5

Rating in categories

4.5

Skill development

4.0

Work-life balance

4.5

Salary

3.6

Job security

3.0

Company culture

3.0

Promotions

2.5

Work satisfaction

Explore 6 Reviews and Ratings
Senior Engineer
175 salaries
unlock blur

₹10.9 L/yr - ₹32 L/yr

Process Engineer
50 salaries
unlock blur

₹6 L/yr - ₹14.5 L/yr

Piping Designer
48 salaries
unlock blur

₹4.4 L/yr - ₹16 L/yr

Piping Engineer
40 salaries
unlock blur

₹6 L/yr - ₹15 L/yr

Instrument Engineer
38 salaries
unlock blur

₹6 L/yr - ₹19.8 L/yr

Explore more salaries
Compare Samsung E&A with

Larsen & Toubro Limited

4.0
Compare

Tata Projects

4.2
Compare

Punj Lloyd

4.3
Compare

Thermax Limited

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview