Upload Button Icon Add office photos

Filter interviews by

SAI Consulting Engineers Assistant Bridge Engineer Interview Questions and Answers

Updated 14 Feb 2021

SAI Consulting Engineers Assistant Bridge Engineer Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed before Feb 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Which type of pile in your major bridge, methodology of piling?
  • Ans. 

    The major bridge uses driven piles as the primary piling methodology.

    • Driven piles are commonly used in major bridge construction.

    • They are installed by hammering or vibrating the pile into the ground.

    • Driven piles provide strong support and are suitable for various soil conditions.

    • Examples of driven piles include steel H-piles and concrete piles.

  • Answered by AI
  • Q2. Define Girder pre stressing system and maximum applied pressure?
  • Ans. 

    Girder pre stressing system is a method of applying tension to the steel girders to increase their load-carrying capacity.

    • Girder pre stressing system involves the use of high-strength steel cables or tendons that are tensioned and anchored to the girder.

    • The tension in the cables creates a compressive force in the girder, which increases its load-carrying capacity.

    • The maximum applied pressure in girder pre stressing sys...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If you don't know the answer not an issue but don't try to give wrong answer.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2025.

Round 1 - Technical 

(4 Questions)

  • Q1. What is the hydraulic gradient line?
  • Q2. What are the methods for managing floods?
  • Q3. What is prestress concrete?
  • Q4. What is Flood Wall?

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintain a positive attitude and demonstrate a willingness to learn.
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. 1)software test Staad pro( just creat a two frames and apply loads(point load , udl , concentric moment) , analysis )
  • Q2. 2)written exam -Q)Given pile model diagram , findout the pile reactions with horizontal forces (manual calculations) -Q)Given I-Section(PSC) with UDL load , find out the stresse(manual calculations) -Q)Gi...
  • Q3. 3)Interview -Q)How to design Box culvert and Draw the Barmark shapes (Like Draftman)

Interview Preparation Tips

Topics to prepare for Navayuga Engineering Company Bridge Design Engineer interview:
  • PSC I-Girders , Pile foundation
  • Staad Pro software
  • BMD , SFD of Simply supported
Interview preparation tips for other job seekers - Managers are frome IIT having 15years Exprience They ask High Knwoledge questions.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Mar 2024. There were 9 interview rounds.

Round 1 - HR 

(4 Questions)

  • Q1. This is information to company
  • Q2. This is company sites through
  • Q3. This company is highly growth
  • Q4. This is responsible for the employee
Round 2 - Technical 

(2 Questions)

  • Q1. Bar bending shedule in this question
  • Q2. What are you quality control
  • Ans. 

    Quality control is a process used to ensure that products or services meet specified requirements and standards.

    • Quality control involves inspecting, testing, and evaluating products or services to ensure they meet quality standards.

    • It also includes identifying defects or deviations from specifications and taking corrective actions.

    • Quality control helps to prevent defects, improve processes, and enhance customer satisfa...

  • Answered by AI
Round 3 - Group Discussion 

This is company at the high economy

Round 4 - Aptitude Test 

Number system and latter

Round 5 - Coding Test 

On basis of defined structure

Round 6 - One-on-one 

(1 Question)

  • Q1. The information to company
Round 7 - Case Study 

This check the soil testing

Round 8 - Assignment 

This is growth process in the employee

Round 9 - So interested your job profile 

(1 Question)

  • Q1. I like this with company

Interview Preparation Tips

Interview preparation tips for other job seekers - Yes
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic questions regarding to experience.
Round 3 - Technical 

(1 Question)

  • Q1. Regarding previous question and basic questions of civil engineering

I applied via Walk-in and was interviewed in Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Tell me about yourself.
  • Q2. Share details of your previous job.
  • Q3. What are your salary expectations?
Round 3 - Technical 

(1 Question)

  • Q1. Why should provide cable (stress) in bridge
  • Ans. 

    Cable (stress) is provided in bridge to increase its load carrying capacity and improve its stability.

    • Cable (stress) helps to distribute the load of the bridge evenly.

    • It reduces the amount of material required for construction.

    • It also helps to improve the stability of the bridge.

    • Cable (stress) is commonly used in suspension bridges.

    • It allows for longer spans to be constructed without the need for additional support.

    • Cab...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please all questions answer say with confidently to interviewer .
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Jan 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic questions such as experience, last salary, etc
Round 3 - One-on-one 

(1 Question)

  • Q1. Technical Interview usually by manager or higher management. Questions about previous job experience and how well you know your field

Interview Preparation Tips

Interview preparation tips for other job seekers - Good Company for freshers. Can build and boost your career in 3 years.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Asking to me...... Only civil engineering questions
  • Q2. Only waste water treatment plants related questions
  • Q3. What is hydro power test of DI pipes...?
  • Ans. 

    Hydro power test of DI pipes is a method to check the strength and integrity of ductile iron pipes under pressure.

    • Hydro power test involves filling the DI pipes with water and pressurizing them to a specified level.

    • The test is conducted to ensure that the pipes can withstand the pressure they will be subjected to in actual use.

    • Leaks or deformations during the test indicate weaknesses in the pipes.

    • The test helps in iden...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Only waste water treatment plants related questions
  • Q2. RCC spun related question
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Few basic CE questions and practical case study
  • Q2. Present your self with confidence
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Walk-in and was interviewed before Jan 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Difference between lap length and development length
  • Ans. 

    Lap length is the overlap of reinforcement bars in concrete, while development length is the length of bar required to transfer stress to concrete.

    • Lap length is used to ensure continuity of reinforcement across a joint or splice in concrete elements.

    • Development length is required to develop the full strength of the reinforcement bar and transfer it to the surrounding concrete.

    • Lap length is typically specified in terms ...

  • Answered by AI
  • Q2. Solid block size 400*400*200mm what is the weight and define
  • Ans. 

    The weight of a solid block with dimensions 400*400*200mm depends on the material it is made of.

    • The weight can be calculated by multiplying the volume of the block by the density of the material.

    • Different materials have different densities, so the weight will vary depending on the material.

    • To calculate the volume, multiply the length, width, and height of the block.

    • To find the weight, multiply the volume by the density...

  • Answered by AI

SAI Consulting Engineers Interview FAQs

What are the top questions asked in SAI Consulting Engineers Assistant Bridge Engineer interview?

Some of the top questions asked at the SAI Consulting Engineers Assistant Bridge Engineer interview -

  1. Which type of pile in your major bridge, methodology of pili...read more
  2. Define Girder pre stressing system and maximum applied pressu...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

TCE Interview Questions
3.8
 • 247 Interviews
AECOM Interview Questions
4.2
 • 114 Interviews
WSP Interview Questions
4.2
 • 90 Interviews
Mott MacDonald Interview Questions
4.2
 • 43 Interviews
View all

Fast track your campus placements

View all
SAI Consulting Engineers Assistant Bridge Engineer Salary
based on 5 salaries
₹4.8 L/yr - ₹5.1 L/yr
7% less than the average Assistant Bridge Engineer Salary in India
View more details

SAI Consulting Engineers Assistant Bridge Engineer Reviews and Ratings

based on 2 reviews

4.1/5

Rating in categories

3.1

Skill development

4.1

Work-life balance

4.1

Salary

3.1

Job security

4.1

Company culture

3.0

Promotions

3.9

Work satisfaction

Explore 2 Reviews and Ratings
Quantity Surveyor
12 salaries
unlock blur

₹5.8 L/yr - ₹11 L/yr

Bridge Engineer
11 salaries
unlock blur

₹5.8 L/yr - ₹7.2 L/yr

Assistant Highway Engineer
10 salaries
unlock blur

₹4.5 L/yr - ₹5.4 L/yr

Support Engineer
7 salaries
unlock blur

₹5.8 L/yr - ₹7.2 L/yr

Bridge Design Engineer
7 salaries
unlock blur

₹5.8 L/yr - ₹6.1 L/yr

Explore more salaries
Compare SAI Consulting Engineers with

AECOM

4.2
Compare

TCE

3.8
Compare

L&T Technology Services

3.3
Compare

Jacobs Engineering Group

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview