Filter interviews by
I applied via Naukri.com and was interviewed before Feb 2020. There were 3 interview rounds.
The major bridge uses driven piles as the primary piling methodology.
Driven piles are commonly used in major bridge construction.
They are installed by hammering or vibrating the pile into the ground.
Driven piles provide strong support and are suitable for various soil conditions.
Examples of driven piles include steel H-piles and concrete piles.
Girder pre stressing system is a method of applying tension to the steel girders to increase their load-carrying capacity.
Girder pre stressing system involves the use of high-strength steel cables or tendons that are tensioned and anchored to the girder.
The tension in the cables creates a compressive force in the girder, which increases its load-carrying capacity.
The maximum applied pressure in girder pre stressing sys...
Top trending discussions
I applied via Referral and was interviewed before Apr 2023. There was 1 interview round.
posted on 10 Oct 2024
posted on 3 May 2019
I applied via Referral
I applied via Recruitment Consulltant and was interviewed in Aug 2023. There were 2 interview rounds.
Types of compressors include reciprocating, rotary, centrifugal, and axial compressors.
Reciprocating compressors use pistons to compress air or gas.
Rotary compressors use rotating mechanisms such as screws or vanes.
Centrifugal compressors use a rotating impeller to create centrifugal force.
Axial compressors use rotating blades to compress air in a straight line.
Examples include reciprocating air compressors, rotary scr...
The procedure to install centrifugal axial compressors involves proper planning, alignment, assembly, and testing.
Ensure proper foundation is prepared to support the compressor
Align the compressor with the piping system for proper flow
Assemble the compressor components according to manufacturer's instructions
Test the compressor for performance and efficiency before final installation
Types of pumps include centrifugal, positive displacement, and axial flow pumps.
Centrifugal pumps: use centrifugal force to move fluid through the pump
Positive displacement pumps: move fluid by trapping a fixed amount and forcing it through the discharge port
Axial flow pumps: move fluid parallel to the pump shaft
A lifting plan procedure is a detailed plan outlining the steps and precautions to be taken when lifting heavy objects.
Identify the weight and dimensions of the object to be lifted
Determine the appropriate lifting equipment needed
Assess the location and environment for any obstacles or hazards
Assign roles and responsibilities to team members involved in the lift
Communicate clearly and follow the plan step by step
Conduc...
Pumps capacity refers to the maximum flow rate a pump can handle.
Pumps capacity is typically measured in gallons per minute (GPM) or liters per minute (LPM).
It is important to consider the required flow rate when selecting a pump for a specific application.
Factors such as pump size, motor power, and system pressure affect the capacity of a pump.
For example, a centrifugal pump may have a capacity of 500 GPM, while a dia
Methods statement for maintaining rotating and static equipment in mechanical engineering.
Regular inspection and maintenance schedules for both rotating and static equipment
Use of proper lubrication for rotating equipment to prevent wear and tear
Checking alignment and balance of rotating equipment to ensure smooth operation
Testing and calibrating static equipment for accuracy and efficiency
Following manufacturer's guid...
posted on 9 Sep 2022
I applied via Campus Placement and was interviewed before Sep 2021. There were 2 interview rounds.
Answering questions related to Civil Site Engineering
Slump is a measure of the consistency of concrete
Concrete ratio refers to the proportion of cement, sand, and aggregate in the mix
Curves on roads are provided to ensure safe and smooth traffic flow
Construction joints are used to allow for expansion and contraction of concrete due to temperature changes
posted on 4 May 2023
I applied via LinkedIn and was interviewed in Apr 2023. There were 3 interview rounds.
I am a civil site engineer with experience in managing construction projects. I am looking for new challenges and opportunities to grow professionally.
I have a Bachelor's degree in Civil Engineering from XYZ University
I have worked for 5 years at ABC Construction Company as a Site Engineer
During my time at ABC, I managed multiple projects including a commercial building and a residential complex
I am looking for a new j...
posted on 28 Dec 2023
I applied via Approached by Company and was interviewed in Jul 2023. There were 4 interview rounds.
The current market labour rate and material price can vary depending on location, demand, and supply.
Labour rates can be influenced by factors such as skill level, experience, and union agreements.
Material prices can fluctuate due to changes in raw material costs, transportation expenses, and market demand.
It is important to regularly monitor market trends and industry news to stay informed about labour rates and mater
I applied via LinkedIn and was interviewed in Mar 2021. There was 1 interview round.
based on 2 reviews
Rating in categories
Bridge Engineer
11
salaries
| ₹5.8 L/yr - ₹7.2 L/yr |
Quantity Surveyor
10
salaries
| ₹6.6 L/yr - ₹11 L/yr |
Assistant Highway Engineer
10
salaries
| ₹4.5 L/yr - ₹5.4 L/yr |
Support Engineer
7
salaries
| ₹5.8 L/yr - ₹7.2 L/yr |
Bridge Design Engineer
7
salaries
| ₹5.8 L/yr - ₹6.1 L/yr |
Sterling & Wilson
Nasser S. Al Hajri Corporation
Navayuga Engineering Company
B.L. Kashyap & Sons