Filter interviews by
I applied via campus placement at LD College of Engineering, Ahmedabad and was interviewed before Nov 2023. There were 2 interview rounds.
Simple aptitude and reasoning.
Performing triaxial test in rock involves applying different levels of stress to a cylindrical rock sample to determine its strength and deformation characteristics.
Prepare a cylindrical rock sample with smooth parallel ends
Place the sample in a triaxial cell and apply confining pressure to simulate in-situ stress conditions
Apply axial load to the sample while measuring the stress and strain at different stages
Repeat t...
Soil clay or silt can be identified by conducting simple field tests such as the ribbon test, feel test, and sedimentation test.
Perform a ribbon test by rolling a small amount of soil between your fingers to determine if it forms a ribbon. Clay soil will form a long, flexible ribbon while silt soil will form a short, weak ribbon.
Conduct a feel test by rubbing a small amount of soil between your fingers to feel the text...
Top trending discussions
Orifice std refers to standard orifice sizes used in engineering. Types of taps include flange taps, corner taps, and D and D/2 taps.
Orifice std refers to standard sizes of orifices used in flow measurement
Types of taps include flange taps, corner taps, and D and D/2 taps
Flange taps are used for large pipes, corner taps for small pipes, and D and D/2 taps for general applications
Pressure gauge operating range refers to the minimum and maximum pressure values that the gauge can accurately measure.
Pressure gauge operating range is typically specified by the manufacturer.
It is important to ensure that the pressure being measured falls within the gauge's operating range to ensure accurate readings.
For example, a pressure gauge with an operating range of 0-100 psi should not be used to measure pres
Straight length requirements for orifice flow element ensure accurate measurement by allowing flow to stabilize before reaching the element.
Straight length requirements typically range from 10 to 44 pipe diameters upstream and 5 to 22 pipe diameters downstream of the orifice.
These requirements help prevent flow disturbances and ensure accurate measurement of flow rate.
For example, if the pipe diameter is 4 inches, the ...
posted on 25 May 2024
Tank area design, layout . safety distance between tanks and location and recommendations for pump station piping and layout
I applied via Naukri.com and was interviewed in Sep 2023. There was 1 interview round.
I have over 10 years of experience working as a structural engineer in various industries.
Worked on designing and analyzing structural components for commercial buildings
Managed a team of engineers to ensure projects were completed on time and within budget
Collaborated with architects and contractors to address design challenges and modifications
Performed site visits and inspections to ensure structural integrity and s
posted on 21 Oct 2023
I applied via Referral and was interviewed before Apr 2023. There were 4 interview rounds.
CAD test on UGNX for mounting concept.
posted on 7 Apr 2022
The maximum bending moment occurs at the points of maximum deflection in a structural element.
Bending moment is the internal moment that causes a structural element to bend.
The maximum bending moment typically occurs at the points of maximum deflection in a beam or girder.
These points are usually located at the supports or at concentrated loads.
The bending moment can be calculated using structural analysis methods such...
I applied via Naukri.com and was interviewed before Jun 2021. There were 2 interview rounds.
I applied via Job Portal and was interviewed before Apr 2023. There were 2 interview rounds.
based on 1 interview
Interview experience
based on 1 review
Rating in categories
Quantity Surveyor
12
salaries
| ₹5.8 L/yr - ₹11 L/yr |
Bridge Engineer
11
salaries
| ₹5.8 L/yr - ₹7.2 L/yr |
Assistant Highway Engineer
10
salaries
| ₹4.5 L/yr - ₹5.4 L/yr |
Support Engineer
7
salaries
| ₹5.8 L/yr - ₹7.2 L/yr |
Bridge Design Engineer
7
salaries
| ₹5.8 L/yr - ₹6.1 L/yr |
AECOM
TCE
L&T Technology Services
Jacobs Engineering Group