AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Revent Group Interview Questions and Answers
Revent Group Interview Experiences
16 interviews found
Sankalp pandey
I applied via Company Website and was interviewed before Nov 2018. There was 1 interview round.
Interview Questionnaire
6 Questions
- Q1. What is your college project ?
- Q2. Why are you studying in Mechanical engineering?
- Q3. What is Precision?
- Ans.
Precision refers to the level of accuracy and consistency in measurements or actions.
Precision is the ability to consistently produce the same result.
It involves minimizing the amount of error or deviation from the desired outcome.
Precision is important in fields such as engineering, manufacturing, and science.
Examples of precision include measuring instruments like micrometers and calipers, as well as machining proces...
- Q4. What is difference between simulation and modeling?
- Ans.
Simulation is the imitation of a real-world process or system, while modeling is the creation of a simplified representation of a system.
Simulation involves running a model to observe its behavior in different scenarios.
Modeling involves creating a simplified representation of a system or process.
Simulation is used to predict the behavior of a system under different conditions.
Modeling is used to understand the behavio...
- Q5. Why are you joining this company?
- Q6. What is jig and fixture?
- Ans.
Jig and fixture are tools used in manufacturing to hold and guide workpieces during machining operations.
Jigs are used to guide and control the cutting tool during machining operations.
Fixtures are used to hold and position the workpiece in the correct orientation for machining.
They increase production efficiency and accuracy while reducing costs.
Examples include drill jigs, welding fixtures, and inspection fixtures.
Interview Preparation Tips
Design Engineer Interview Questions asked at other Companies
Anonymous
Selected
I applied via Recruitment Consulltant and was interviewed in Dec 2024. There was 1 interview round.
(3 Questions)
- Q1. Quality inspection process
- Q2. Pdi full name..
- Ans.
PDI stands for Pre-Delivery Inspection.
PDI is a quality control process conducted before delivering a product to the customer.
It involves checking the product for any defects or issues that may have occurred during manufacturing or transportation.
Examples of PDI include inspecting a car before it is handed over to a customer to ensure it meets quality standards.
PDI is commonly used in industries such as automotive, ele
- Q3. Parts process quality control plan
Interview Preparation Tips
Quality Inspector Interview Questions asked at other Companies
Selected
I applied via Walk-in and was interviewed in Dec 2023. There were 2 interview rounds.
(2 Questions)
- Q1. Self introduce, documentation
- Q2. Design fixture, gauge
(1 Question)
- Q1. Self intoduce, salary
Interview Preparation Tips
- Apqp,ppap
- Core tool
- Technical review
- Layout Design
Mechanical Engineer Interview Questions asked at other Companies
I applied via Recruitment Consulltant and was interviewed in Sep 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Tough Questions on production
- Q2. Management and time management
(2 Questions)
- Q1. WOrking exprience
- Q2. SYstems Knowledge
Interview Preparation Tips
Management Trainee Interview Questions asked at other Companies
Revent Group interview questions for popular designations
Selected
I applied via Walk-in and was interviewed in Dec 2023. There was 1 interview round.
(1 Question)
- Q1. Job profile Worl
- Ans. My profile os NPD and prpcess engineering
Interview Preparation Tips
- New Product Development
- Process Improvement
- PPAP Documentation
- Documentation
- Apqp
- PFMEA
- AutoCAD
- Layout
- Line Balancing
- Technical review
- Customer Handling
Engineering Manager Interview Questions asked at other Companies
I applied via LinkedIn and was interviewed in Aug 2023. There were 2 interview rounds.
(2 Questions)
- Q1. BASIC SQL RELATED QUESTIONS
- Q2. TELL ABOUT YOURSELF
Interview Preparation Tips
Intern Interview Questions asked at other Companies
Selected
I applied via Referral and was interviewed in Jul 2023. There were 3 interview rounds.
Maths general mechanical
(1 Question)
- Q1. Mechanical engineering ppap csr ms project
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions asked at other Companies
I applied via Recruitment Consulltant
(6 Questions)
- Q1. All Instruments with least count like DVC , micrometer, inside caliper etc
- Q2. All gauges like PPG, APG, TPG, RING gauges, pressure gauges etc
- Q3. 5 core tools of quality
- Ans.
The 5 core tools of quality are: flowcharts, check sheets, histograms, Pareto charts, and cause-and-effect diagrams.
Flowcharts: Visual representation of a process to identify areas of improvement.
Check sheets: Used to collect and organize data for analysis.
Histograms: Graphical representation of data distribution.
Pareto charts: Helps prioritize problems by identifying the most significant factors.
Cause-and-effect diagr...
- Q4. 7 QC tools for quality
- Ans.
The 7 QC tools are a set of techniques used in quality management to identify and solve problems.
Check sheet: Used to collect and analyze data
Control chart: Monitors process performance over time
Histogram: Visualizes data distribution
Pareto chart: Identifies and prioritizes problems
Cause-and-effect diagram: Identifies root causes of problems
Scatter diagram: Shows relationship between two variables
Flowchart: Illustrates
- Q5. 8 D principles for customer complaints handling
- Ans.
The 8 D principles for customer complaints handling are a systematic approach to resolving customer issues.
Define the problem
Determine the root cause
Develop a corrective action plan
Deploy the plan
Do a verification of the solution
Document the process
Determine the effectiveness of the solution
Drive prevention to avoid future complaints
- Q6. Process audits and product Audits
(3 Questions)
- Q1. Self introduction, educational background, achievements etc
- Q2. Personality development related question
- Q3. Team work, leadership related question
Interview Preparation Tips
Be calm and presentable
Don't give answers based on assumptions, be specific with facts.
QA Engineer Interview Questions asked at other Companies
Selected
(2 Questions)
- Q1. Basic questions related to branch.
- Q2. What is automation. What is machine and transform and it's principal and work.
- Ans.
Automation is the use of technology to perform tasks without human intervention.
Automation involves the use of machines, computers, and other technologies to perform tasks that would otherwise require human intervention.
Examples of automation include robotic assembly lines, self-driving cars, and smart home systems.
Machine and transform is a principle in electrical engineering that describes the relationship between in...
Skills evaluated in this interview
Electrical Maintenance Engineer Interview Questions asked at other Companies
Selected
I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 5 interview rounds.
(1 Question)
- Q1. As per post requirment basic
(1 Question)
- Q1. As per post and experience
(1 Question)
- Q1. As per knowledge of experience and technical
(1 Question)
- Q1. As per joining and salary discussion
Interview Preparation Tips
Senior Production Engineer Interview Questions asked at other Companies
Anil Kumar
Selected
I applied via Naukri.com and was interviewed in Nov 2022. There were 2 interview rounds.
(2 Questions)
- Q1. What is DHCP server
- Ans.
DHCP server assigns IP addresses to devices on a network automatically.
DHCP stands for Dynamic Host Configuration Protocol
It eliminates the need for manual IP address configuration
DHCP server assigns IP addresses, subnet masks, default gateways, and DNS servers
DHCP lease time determines how long a device can use an assigned IP address
Examples of DHCP servers include Windows Server, Cisco routers, and Linux DHCP servers
- Q2. Vendor management
Skills evaluated in this interview
IT Executive Interview Questions asked at other Companies
Top trending discussions
Revent Group Interview FAQs
The duration of Revent Group interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Revent Group Interviews By Designations
- Revent Group Management Trainee Interview Questions
- Revent Group Graduate Engineer Interview Questions
- Revent Group Quality Engineer Interview Questions
- Revent Group Engineering Manager Interview Questions
- Revent Group Project Manager-Production/Manufacturing/Maintenance Interview Questions
- Revent Group Design Engineer Interview Questions
- Revent Group Intern Interview Questions
- Revent Group Mechanical Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
Revent Group Interview Process
based on 11 interviews
Interview experience
Interview Questions from Similar Companies
Revent Group Reviews and Ratings
based on 416 reviews
Rating in categories
|
Engineer
28
salaries
|  ₹2 L/yr - ₹6 L/yr |
|
Quality Engineer
26
salaries
| ₹1.8 L/yr - ₹4.2 L/yr |
|
Assistant Manager
22
salaries
| ₹4.8 L/yr - ₹7.5 L/yr |
|
Graduate Engineer Trainee (Get)
19
salaries
| ₹1.4 L/yr - ₹2.3 L/yr |
|
Senior Engineer
18
salaries
| ₹3 L/yr - ₹6.6 L/yr |
JBM Group
Subros
Ceat Tyres
UNO Minda
- Home >
- Interviews >
- Revent Group Interview Questions
