Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Reliance Industries Team. If you also belong to the team, you can get access from here

Reliance Industries Verified Tick

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Reliance Industries Summer Trainee Interview Questions and Answers

Updated 13 Sep 2023

Reliance Industries Summer Trainee Interview Experiences

1 interview found

Summer Trainee Interview Questions & Answers

user image ANKIT KUMAR

posted on 13 Sep 2023

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Simple apti and core questions

Round 2 - Technical 

(6 Questions)

  • Q1. Technical plus HR
  • Q2. Distiallation questions heat transfer questions and fluid mechanics questions.
  • Q3. What is flooding and weeping
  • Ans. 

    Flooding and weeping are terms used in the context of chemical engineering to describe the behavior of liquids in a packed column.

    • Flooding occurs when the liquid flow rate is too high, causing the liquid to accumulate in the column and impede the gas flow.

    • Weeping occurs when the liquid flow rate is too low, causing the liquid to trickle down the column walls instead of forming a proper liquid film on the packing.

    • Both f...

  • Answered by AI
  • Q4. Design distialltion column
  • Ans. 

    Distillation column is a vertical vessel used to separate components in a liquid mixture based on their boiling points.

    • Design the column with trays or packing material to increase surface area for vapor-liquid contact.

    • Include a reboiler at the bottom to vaporize the liquid mixture.

    • Add a condenser at the top to condense the vapor back into liquid.

    • Consider the number of theoretical stages required for separation efficien...

  • Answered by AI
  • Q5. What do you mean by NPSH
  • Ans. 

    NPSH stands for Net Positive Suction Head, a measure of the pressure available at the suction port of a pump.

    • NPSH is important for determining if a pump will operate properly without cavitation.

    • It is calculated by subtracting the vapor pressure of the liquid from the total suction head.

    • NPSH is typically expressed in units of meters or feet.

    • Adequate NPSH is crucial for preventing damage to the pump and ensuring efficien

  • Answered by AI
  • Q6. Training related questions

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Dec 2020. There were 6 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. 1st round is technical , 2nd is values & behaviors , 3rd is assessment road
  • Q2. Be clear on values & behaviours , practice assement round offline before attempting

Interview Preparation Tips

Interview preparation tips for other job seekers - its a long process may take 2-3 months , there is internal & external assement before selectioon is finalized . Good luck
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jan 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

My GD topic was renewable energy.

Round 2 - HR 

(7 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.

    • 10+ years of experience in engineering

    • Specialize in designing and implementing complex systems

    • Strong problem-solving skills

    • Experience with various programming languages such as Java, Python, and C++

  • Answered by AI
  • Q2. Why do you want to leave your previous company and join GAIL
  • Ans. 

    Seeking new challenges and growth opportunities at GAIL.

    • Desire for new challenges and opportunities for growth

    • Interested in working in a different industry or with different technologies

    • Attracted to GAIL's reputation and projects

    • Seeking a more collaborative and innovative work environment

  • Answered by AI
  • Q3. What do your parents do
  • Ans. 

    My parents are both retired now, but my father used to work as a civil engineer and my mother was a teacher.

    • Father worked as a civil engineer

    • Mother was a teacher

    • Both are retired now

  • Answered by AI
  • Q4. Have you ever visited Delhi earlier
  • Ans. 

    Yes, I have visited Delhi earlier for a business trip.

    • Visited Delhi for a business trip

    • Explored historical sites like Red Fort and Qutub Minar

    • Enjoyed local cuisine like butter chicken and chaat

  • Answered by AI
  • Q5. How did you reach Noida for interview
  • Q6. Where are you staying in Noida for interview process
  • Ans. 

    I am staying at a hotel in Sector 18, Noida for the interview process.

    • Staying at a hotel in Sector 18, Noida

    • Close to the interview location

    • Comfortable accommodation for the duration of the process

  • Answered by AI
  • Q7. Related family background
Round 3 - Technical 

(7 Questions)

  • Q1. Detailed technical questions about bearing, pump, furnace tubes (1st and 2nd pass)MOC, TLE MOC, heat exchanger tube MOC, TEMA codes and classification etc.
  • Q2. Decoking process of cracking furnace, Naphtha circuit of furnace with sketches,
  • Ans. 

    Decoking process involves removing coke deposits from cracking furnace and naphtha circuit to maintain efficiency.

    • Decoking process involves burning off coke deposits using controlled combustion.

    • Mechanical decoking involves using high-pressure water jets to remove coke deposits.

    • Chemical decoking involves using solvents or acids to dissolve coke deposits.

    • Regular decoking is essential to prevent blockages and maintain fur

  • Answered by AI
  • Q3. Detailed refrigeration cycles
  • Ans. 

    Refrigeration cycles are thermodynamic processes used in refrigerators and air conditioners to transfer heat from a low temperature reservoir to a high temperature reservoir.

    • Refrigeration cycles typically involve four main components: compressor, condenser, expansion valve, and evaporator.

    • The refrigerant undergoes a cycle of compression, condensation, expansion, and evaporation to absorb heat from the space being coole...

  • Answered by AI
  • Q4. Safety related questions which I couldn't answer well
  • Q5. Safety procedures before starting of hot job
  • Ans. 

    Safety procedures before starting a hot job include obtaining a hot work permit, conducting a hazard assessment, ensuring proper ventilation, and having fire extinguishing equipment nearby.

    • Obtain a hot work permit before starting any hot job

    • Conduct a hazard assessment to identify potential risks

    • Ensure proper ventilation in the work area to prevent buildup of flammable gases

    • Have fire extinguishing equipment nearby and r

  • Answered by AI
  • Q6. Furnace tubes Welding related questions
  • Q7. Scaffolding and insulation related general questions (easy)

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared for GD and just keep enough technical knowledge on your field of experience. Be relaxed and give interview with happy face..don't be depressed if you couldn't answer any question during interview. If you don't know anything just say "I don't know" ...keep the things simple and give honest answer always.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 

(1 Question)

  • Q1. Tell us about your academic projects.
Interview experience
4
Good
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Not Selected

I applied via Company Website and was interviewed in May 2024. There were 2 interview rounds.

Round 1 - Group Discussion 

Behavioral questions and resume delve

Round 2 - Case Study 

Pmi - product management information

Interview Preparation Tips

Interview preparation tips for other job seekers - study supply chain, product management information and presentation

I applied via Company Website and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. How will you identify if a pump is cavitating while working on a DCS panel?
  • Ans. 

    To identify if a pump is cavitating while working on a DCS panel, you can look for certain indicators.

    • Monitor the pump's suction pressure. If it is fluctuating or dropping below the specified range, it may indicate cavitation.

    • Check the pump's discharge pressure. If it is higher than normal, it could be a sign of cavitation.

    • Listen for unusual noises such as a rattling or grinding sound coming from the pump.

    • Inspect the p...

  • Answered by AI
  • Q2. How would you prepare a hydrocarbon vessel for vessel entry?
  • Ans. 

    To prepare a hydrocarbon vessel for vessel entry, follow these steps:

    • Ensure the vessel is properly isolated from the process and all sources of energy

    • Ventilate the vessel to remove any flammable or toxic gases

    • Perform a thorough inspection of the vessel for any signs of leaks or damage

    • Implement proper lockout/tagout procedures to prevent accidental activation of equipment

    • Provide appropriate personal protective equipment...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for GAIL Senior Engineer interview:
  • Chemical Engineering
  • DCS Operations
Interview preparation tips for other job seekers - Try to answer the questions asked in simple words. The interviewer generally wants to judge an interviewee based on his understanding of the subject. When an applicant is appearing for an interview, he should share his experience and try to quote examples from his experience.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Newspaper Ad and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. I was asked to make a presentation on laser technology.
Round 3 - Aptitude Test 

Knowledge of the English language, its vocabulary and comprehension. Ability to solve basic mathematical problem, which shows the capacity to use an analytical approach to everyday puzzles.

Interview Preparation Tips

Interview preparation tips for other job seekers - One needs to present a bright visage. Then, you have to open minded towards the solutions to problems, instead of being dogmatic.

I applied via Company Website and was interviewed in Nov 2021. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About work experience and responsibilities
  • Q2. Why you are leaving to present job

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintain your confidence level, give suitable answer if you know otherwise say sorry and move to next question....
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Sep 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

2 hrs quantitative and Current affairs

Round 2 - One-on-one 

(2 Questions)

  • Q1. What were doing after completion of your B Tech
  • Ans. 

    After completing my B Tech, I pursued a Master's degree in Engineering to further enhance my skills and knowledge.

    • Enrolled in a Master's program in Engineering

    • Focused on specialized courses related to my field of interest

    • Participated in research projects and internships to gain practical experience

  • Answered by AI
  • Q2. What is generative AI
  • Ans. 

    Generative AI is a type of artificial intelligence that is capable of creating new content, such as images, text, or music, based on patterns and examples it has been trained on.

    • Generative AI uses neural networks to generate new content based on patterns in existing data.

    • Examples of generative AI include DeepDream, which creates surreal images, and GPT-3, a language model that can generate human-like text.

    • Generative AI...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and you are bound to get it

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Oct 2023. There were 2 interview rounds.

Round 1 - Group Discussion 

Green house gases and environmental pollution

Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about your self
  • Ans. 

    I am a dedicated and experienced engineer with a passion for problem-solving and innovation.

    • Education background in engineering

    • Work experience in relevant field

    • Skills in problem-solving and innovation

    • Passion for engineering projects

    • Ability to work well in a team

  • Answered by AI
  • Q2. Where do you see yourself in 5 years
  • Ans. 

    In 5 years, I see myself as a senior engineer leading a team of innovative professionals, contributing to cutting-edge projects and continuously learning and growing in my field.

    • Leading a team of engineers on impactful projects

    • Continuously learning and growing in my field

    • Contributing to cutting-edge technology advancements

  • Answered by AI

Reliance Industries Interview FAQs

How many rounds are there in Reliance Industries Summer Trainee interview?
Reliance Industries interview process usually has 3 rounds. The most common rounds in the Reliance Industries interview process are Resume Shortlist, Aptitude Test and Technical.
What are the top questions asked in Reliance Industries Summer Trainee interview?

Some of the top questions asked at the Reliance Industries Summer Trainee interview -

  1. What do you mean by N...read more
  2. What is flooding and weep...read more
  3. Design distialltion col...read more

Tell us how to improve this page.

Reliance Industries Summer Trainee Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Shell Interview Questions
4.0
 • 193 Interviews
Bharat Petroleum Interview Questions
4.1
 • 149 Interviews
Schlumberger Interview Questions
3.9
 • 140 Interviews
ExxonMobil Interview Questions
3.8
 • 65 Interviews
GAIL Interview Questions
4.4
 • 65 Interviews
bp Interview Questions
3.8
 • 61 Interviews
View all
Manager
3.4k salaries
unlock blur

₹5.4 L/yr - ₹19.5 L/yr

Field Executive
2.7k salaries
unlock blur

₹1.8 L/yr - ₹9.5 L/yr

Assistant Manager
2.7k salaries
unlock blur

₹1.8 L/yr - ₹10 L/yr

Senior Manager
2.4k salaries
unlock blur

₹8 L/yr - ₹28 L/yr

Senior Executive
1.2k salaries
unlock blur

₹1.8 L/yr - ₹8.5 L/yr

Explore more salaries
Compare Reliance Industries with

Indian Oil Corporation

4.4
Compare

Shell

4.0
Compare

Bharat Petroleum

4.1
Compare

Hindustan Petroleum

4.3
Compare
Did you find this page helpful?
Yes No
write
Share an Interview