Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Raphe mPhibr Team. If you also belong to the team, you can get access from here

Raphe mPhibr Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Raphe mPhibr Mechanical Technician Interview Questions and Answers

Updated 17 May 2024

Raphe mPhibr Mechanical Technician Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Why are you leaving your job ?
  • Ans. For career growth and new endorsement
  • Answered Anonymously
  • Q2. What is your specialization

Interview Preparation Tips

Interview preparation tips for other job seekers - Be fair and confident full

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Dec 2021. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. What is your previous company
  • Ans. 

    My previous company was XYZ Corporation.

    • XYZ Corporation is a multinational technology company.

    • I worked in the IT department, providing technical support and assistance to employees.

    • I gained experience in troubleshooting hardware and software issues.

    • I also assisted in the implementation of new technologies and systems.

    • One of the major projects I worked on was the migration to a cloud-based infrastructure.

    • I collaborated ...

  • Answered by AI
  • Q2. What is your previous annual package
  • Q3. 3 years bond complete

Interview Preparation Tips

Interview preparation tips for other job seekers - Zydus life science is good organization and very good culture not any problem
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Dec 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. About your work experience
  • Q2. About your skills and technical knowledge
Round 3 - HR 

(2 Questions)

  • Q1. About your previous company and role
  • Q2. About your current CTC

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepare
Gain good technical knowledge about your role

I applied via Recruitment Consultant and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Aap jo karte hai wahi batana hai aur kuch nahi
  • Q2. Jo nahi aata sidha mana kar de.
  • Q3. Bich bich me na bole
  • Q4. Jo bhi dout ho aakhiri me puche

Interview Preparation Tips

Interview preparation tips for other job seekers - Normal answer de don't be afraid

I applied via Walk-in and was interviewed before Dec 2019. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. What is Validations
  • Ans. 

    Validations are checks performed on data to ensure its accuracy, consistency, and integrity.

    • Validations are used to verify that data meets certain criteria or rules.

    • They are commonly used in software development to ensure data quality.

    • Examples of validations include checking for required fields, data types, and ranges.

    • Validations can also be used to prevent invalid or malicious input.

    • They help maintain data integrity a

  • Answered by AI
  • Q2. HVAC Validation resent changes .

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing think positive mindset.

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What is GMP, what is sop, what is alcoa
  • Ans. 

    GMP stands for Good Manufacturing Practice, SOP stands for Standard Operating Procedure, and ALCOA is an acronym for Attributable, Legible, Contemporaneous, Original, and Accurate.

    • GMP is a set of guidelines and regulations that ensure the quality and safety of pharmaceutical products.

    • SOPs are step-by-step instructions that outline the approved methods to perform specific tasks or operations.

    • ALCOA is a principle used in...

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. Tell me about yourself , Which machine you are handling.?how can you solve the problem? what is the capsule? how many type of problems are find out in capsule feeling machine?.
  • Ans. 

    I am a Senior Technician experienced in handling various machines, including capsule filling machines.

    • I have expertise in operating and troubleshooting capsule filling machines.

    • I am familiar with different types of capsule filling machines, such as manual, semi-automatic, and fully automatic machines.

    • I have successfully solved problems related to machine calibration, capsule jamming, and inconsistent filling.

    • I am skill...

  • Answered by AI
  • Q2. What incident you handle
  • Ans. 

    As a Senior Technician, I handle various incidents related to technical issues and equipment malfunctions.

    • Troubleshooting and resolving hardware and software problems

    • Repairing and maintaining equipment such as computers, printers, and network devices

    • Responding to service requests and resolving issues in a timely manner

    • Providing technical support to end-users and assisting with system upgrades

    • Documenting incidents and m...

  • Answered by AI
  • Q3. How can you solve waight variation in capsule feeling machine
  • Ans. 

    Weight variation in capsule filling machine can be solved by calibrating the machine, checking the quality of raw materials, and optimizing the filling process.

    • Calibrate the machine regularly to ensure accurate weighing.

    • Check the quality of raw materials to ensure consistency in weight.

    • Optimize the filling process by adjusting speed, vibration, and compression.

    • Implement quality control measures to detect and reject cap...

  • Answered by AI
Round 4 - HR 

(1 Question)

  • Q1. What is your current position what salary you expected from us
  • Ans. 

    I am currently working as a Senior Technician and I expect a competitive salary based on my experience and skills.

    • Currently working as a Senior Technician

    • Expecting a competitive salary

    • Salary based on experience and skills

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I was interviewed in Jul 2024.

Round 1 - Technical 

(5 Questions)

  • Q1. What is the Wruster principle?
  • Ans. 

    The Wruster principle is a concept in fluid dynamics that explains the behavior of fluid flow around a moving object.

    • The Wruster principle states that when a fluid flows around a moving object, the pressure on the front side of the object decreases, causing the fluid to accelerate and create a low-pressure zone.

    • This low-pressure zone then pulls the object forward, creating thrust in the direction of the fluid flow.

    • The ...

  • Answered by AI
  • Q2. What is the combination of a wruster plate?
  • Ans. 

    A wruster plate is a combination of a thruster and a rudder plate used in marine propulsion systems.

    • A wruster plate combines the functions of a thruster (for lateral movement) and a rudder plate (for steering).

    • It is commonly used in marine propulsion systems to improve maneuverability.

    • The wruster plate allows for more precise control and easier handling of large vessels in tight spaces.

  • Answered by AI
  • Q3. Which product you are handle?
  • Ans. 

    I handle a variety of electronic products, including smartphones, laptops, and tablets.

    • Smartphones

    • Laptops

    • Tablets

  • Answered by AI
  • Q4. How many types off pellet coating?
  • Ans. 

    There are several types of pellet coating used in various industries.

    • Sugar coating

    • Film coating

    • Enteric coating

    • Controlled release coating

    • Functional coating

  • Answered by AI
  • Q5. What is data integrity
  • Ans. 

    Data integrity refers to the accuracy, consistency, and reliability of data throughout its lifecycle.

    • Ensuring data is accurate and consistent

    • Preventing unauthorized access or modifications

    • Implementing data validation processes

    • Regularly backing up data to prevent loss

    • Examples: checksums, encryption, access controls

  • Answered by AI
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Technical Work not possible in the Zydus totally bypass work and find you in work time then made Data integrity case and immediately terminate .
  • Q2. Very Bad action HR on the spot terminate

I applied via Referral and was interviewed in Aug 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Ask for basic job description
Round 3 - HR 

(1 Question)

  • Q1. What are your salary expectations?
Round 4 - HR 

(1 Question)

  • Q1. Why are you looking for a change?

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident don't get nervous
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What is PLC full form
  • Ans. 

    PLC stands for Programmable Logic Controller.

    • PLC is a digital computer used for automation of electromechanical processes.

    • It is commonly used in industries for controlling machinery and processes.

    • PLCs are programmed using specialized software to perform specific tasks.

    • Examples of PLC brands include Siemens, Allen-Bradley, and Mitsubishi.

  • Answered by AI
  • Q2. What is HMI full form
  • Ans. 

    HMI stands for Human Machine Interface, which is a user interface that connects a person to a machine, system, or device.

    • HMI stands for Human Machine Interface

    • It is a user interface that allows interaction between humans and machines

    • Examples include touchscreens, keyboards, and control panels

  • Answered by AI
  • Q3. WHAT IS VFD ....
  • Ans. 

    VFD stands for Variable Frequency Drive, a type of motor controller that drives an electric motor by varying the frequency and voltage supplied to the motor.

    • Used to control the speed and torque of AC motors

    • Helps in energy savings by adjusting motor speed based on demand

    • Commonly used in HVAC systems, pumps, and conveyor belts

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview only for freshers diploma holder

Skills evaluated in this interview

Raphe mPhibr Interview FAQs

How many rounds are there in Raphe mPhibr Mechanical Technician interview?
Raphe mPhibr interview process usually has 1 rounds. The most common rounds in the Raphe mPhibr interview process are HR.
How to prepare for Raphe mPhibr Mechanical Technician interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Raphe mPhibr. The most common topics and skills that interviewers at Raphe mPhibr expect are Communication Skills, ITI, Maintenance, Power Tools and Production.

Tell us how to improve this page.

Raphe mPhibr Mechanical Technician Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Cipla Interview Questions
4.1
 • 482 Interviews
Siemens Interview Questions
4.1
 • 418 Interviews
Lupin Interview Questions
4.2
 • 335 Interviews
Aurobindo Pharma Interview Questions
4.0
 • 238 Interviews
Vivo Interview Questions
4.1
 • 193 Interviews
Biocon Limited Interview Questions
3.9
 • 152 Interviews
View all
Raphe mPhibr Mechanical Technician Salary
based on 4 salaries
₹3 L/yr - ₹8.8 L/yr
47% more than the average Mechanical Technician Salary in India
View more details

Raphe mPhibr Mechanical Technician Reviews and Ratings

based on 3 reviews

1.9/5

Rating in categories

2.3

Skill development

2.0

Work-life balance

2.3

Salary

2.3

Job security

2.4

Company culture

2.3

Promotions

1.9

Work satisfaction

Explore 3 Reviews and Ratings
Technical Staff
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

HR Executive
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Research Software Developer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Mechanical Engineer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Embedded Software Engineer
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Raphe mPhibr with

Biocon Limited

3.9
Compare

DRJ & CO

5.0
Compare

Sun Pharmaceutical Industries

4.0
Compare

Cipla

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview