Upload Button Icon Add office photos

Filter interviews by

PMT Machines Graduate Trainee Interview Questions and Answers

Updated 3 May 2023

PMT Machines Graduate Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Tell me about your self.
Round 3 - Technical 

(1 Question)

  • Q1. Define gear and types.
  • Ans. 

    Gears are mechanical components that transmit power and motion between rotating shafts. There are various types of gears.

    • Gears are used to transmit power and motion between rotating shafts.

    • They are mechanical components that have teeth that mesh with other gears to transmit torque.

    • The most common types of gears are spur, helical, bevel, worm, and planetary gears.

    • Spur gears have straight teeth and are used for low-speed...

  • Answered by AI

Interview questions from similar companies

I applied via Company Website and was interviewed before Jun 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. They hv ask VFD and plc related basic question.

Interview Preparation Tips

Topics to prepare for Armstrong Machine Builders Service Engineer interview:
  • powerflex 525,4 M, siemens V20
  • Allen Bradley Plc
  • Siemens PLC
Interview preparation tips for other job seekers - I have applied through their carrier option, interview was normal with telephonic conversation in which i have got call from hr after 1 month i get 4 call in which technical question they have ask.
if u r going to give interview in armstrong for electrical and automation u shd have same basic knowledge of powerflex 525 , sinamics V20 vfd and also basic knowledge of micrologic 800, 1400 and siemens S7 1200 PLC.

I applied via Newspaper Ad and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Group Discussion 

We were given a topic effect of IOT on industry

Round 2 - HR 

(1 Question)

  • Q1. Basic HR related questions were asked

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while speaking share your past experience in

Interview Questionnaire 

1 Question

  • Q1. What is market potential for machine tools?
  • Ans. 

    The market potential for machine tools is significant due to increasing industrialization and automation.

    • Growing demand for machine tools in various industries such as automotive, aerospace, and electronics

    • Rapid industrialization in emerging economies like China and India

    • Advancements in technology leading to the development of advanced machine tools

    • Increasing focus on automation and precision in manufacturing processes

    • ...

  • Answered by AI

I applied via Walk-in and was interviewed before Aug 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Tell me about your self?
  • Q2. I tell my name my education my hobbies interests & my family
  • Q3. Least count of micro meter
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the micrometer scale.

    • The least count of a micrometer is determined by the number of divisions on the thimble and the pitch of the screw.

    • It is usually expressed in micrometers or millimeters.

    • For example, if a micrometer has 50 divisions on the thimble and the pitch of the screw is 0.5 mm, then the least count would be 0.01 mm (0.5 mm / 50 di

  • Answered by AI
  • Q4. Least count of vernier calliper
  • Ans. 

    The least count of a vernier caliper is the smallest measurement that can be read on the scale.

    • The least count is determined by the number of divisions on the main scale and the vernier scale.

    • It is calculated by dividing the smallest division on the main scale by the total number of divisions on the vernier scale.

    • For example, if the smallest division on the main scale is 0.1 mm and the total number of divisions on the ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - keep calm and active in the front of interviewer.
dont be nervous

I applied via Recruitment Consultant and was interviewed in Oct 2018. There were 3 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. What is backlash
  • Ans. 

    Backlash is the play or movement between mechanical components due to gaps or clearances.

    • Backlash refers to the amount of movement or play that occurs between two mechanical components.

    • It is caused by gaps or clearances between the components, which can result in imprecise or inaccurate movement.

    • Backlash is commonly seen in gears, where the teeth have small gaps to allow for smooth engagement.

    • For example, when a gear i...

  • Answered by AI
  • Q2. Write down repeatability program
  • Ans. 

    A repeatability program ensures consistent and reliable performance of a service engineer's tasks.

    • Develop standardized procedures and protocols for service tasks

    • Implement quality control measures to ensure consistency

    • Regularly train and update service engineers on best practices

    • Establish feedback loops to identify and address any deviations

    • Monitor and analyze performance metrics to measure repeatability

    • Continuously imp

  • Answered by AI
  • Q3. Turret problem and assembly
  • Ans. 

    Turret problem and assembly is a common issue in service engineering.

    • Turret problems can include misalignment, wear and tear, and malfunctioning components.

    • Assembly of the turret requires careful attention to detail and proper alignment of components.

    • Regular maintenance and inspection can prevent turret problems and ensure proper assembly.

    • Proper training and experience are necessary for effective turret problem diagnos...

  • Answered by AI
  • Q4. Chucking cylinder can be modified
  • Q5. Take offset
  • Q6. Ball screw bearing replacement procedures
  • Ans. 

    The ball screw bearing replacement procedures involve several steps to ensure proper installation and functionality.

    • Start by removing the old ball screw bearing carefully to avoid any damage.

    • Clean the mounting surface and inspect for any signs of wear or damage.

    • Apply lubrication to the new ball screw bearing before installation.

    • Align the bearing properly and secure it in place using the appropriate tools.

    • Test the funct...

  • Answered by AI
  • Q7. Discuss on salery

Interview Preparation Tips

General Tips: Go with confidence
Skills: T, Communication, Problem Solving, Time Management, Decision Making Skills
Duration: >3 Months

I applied via Referral and was interviewed before Sep 2020. There was 1 interview round.

Interview Questionnaire 

4 Questions

  • Q1. What is cnc ,
  • Ans. 

    CNC stands for Computer Numerical Control, which is a manufacturing process that uses computerized systems to control machine tools.

    • CNC machines are used in various industries, including automotive, aerospace, and healthcare.

    • They can perform complex tasks with high precision and accuracy.

    • CNC machines can be programmed to produce identical parts repeatedly.

    • They are operated using specialized software and require skilled...

  • Answered by AI
  • Q2. Computer numerical control machine
  • Ans. 

    A computer-controlled machine tool used for precision machining.

    • CNC machines use computer programs to control the movement of the machine.

    • They are used in manufacturing for precision cutting, drilling, and shaping of materials.

    • CNC machines can be used for a variety of materials including metal, wood, and plastic.

    • Examples of CNC machines include lathes, mills, routers, and plasma cutters.

  • Answered by AI
  • Q3. What is vmc machine
  • Ans. 

    Vmc machine stands for Vertical Machining Center. It is a type of CNC machine used for precision cutting and drilling.

    • Vmc machine is a type of CNC machine

    • It is used for precision cutting and drilling

    • It operates on a vertical axis

    • It can perform multiple operations in a single setup

    • Examples of VMC machines include Haas VF-2, Mazak VCN-510C, etc.

  • Answered by AI
  • Q4. Vertical milling machine

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was technical and knowledge about cnc machine and based on sales Engineer
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. About personality intro and about the past job
  • Q2. Family details also the approval for the salary structure
Round 3 - Technical 

(4 Questions)

  • Q1. Just basic questions
  • Q2. Also the speaking skill the way you speak
  • Q3. All the interview process was in video chat
  • Q4. Some questions like about generator machine and engine also the working principle.

Interview Preparation Tips

Interview preparation tips for other job seekers - Always remember speak anything with confidence
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Why you wana work here?
  • Ans. 

    I am passionate about providing technical support and problem-solving for customers.

    • I have a strong background in engineering and enjoy troubleshooting technical issues.

    • I am excited about the opportunity to work with cutting-edge technology and contribute to the success of the team.

    • I value customer satisfaction and believe in the importance of delivering high-quality service.

    • I appreciate the company's reputation for in

  • Answered by AI
  • Q2. Where did you work before?

Interview Preparation Tips

Interview preparation tips for other job seekers - Very good experience
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Troubleshooting related to engine or Dg set
  • Q2. No any other question related out.

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare about company profile.

PMT Machines Interview FAQs

How many rounds are there in PMT Machines Graduate Trainee interview?
PMT Machines interview process usually has 3 rounds. The most common rounds in the PMT Machines interview process are Resume Shortlist, One-on-one Round and Technical.

Tell us how to improve this page.

PMT Machines Graduate Trainee Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Junior Engineer
67 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
32 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
24 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
21 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
17 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare PMT Machines with

Micromatic Grinding Technologies

4.2
Compare

Jyoti CNC Automation

4.1
Compare

AceMicromatic Group

4.2
Compare

HMT Machine Tools

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview