100+ Pinnacle Infotech Interview Questions & Answers | Complete Prep Guide 2025

Pinnacle Infotech Interview Experiences

Popular Designations

55 interviews found

Rebar Detailer Interview Questions & Answers

Anonymous

posted on 6 Aug 2023

Interview experience

Good

Difficulty level

Moderate

Process Duration

2-4 weeks

Result

Selected

I applied via Approached by Company and was interviewed before Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist

Pro Tip by AmbitionBox:

Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.

View all Resume tips

Round 2 - Technical

(8 Questions)

Q1. What is RCC? Where it is used?

Ans.

RCC stands for Reinforced Cement Concrete. It is a composite material made of concrete and steel reinforcement bars.

RCC is commonly used in construction for buildings, bridges, dams, and other structures.
It provides strength and durability to the structure by combining the compressive strength of concrete with the tensile strength of steel reinforcement.
Examples of RCC structures include high-rise buildings, parking ga

Answered by AI

View 1 more answer

Q2. Difference between CIP & Precast?

Ans.

CIP (Cast-In-Place) involves pouring concrete on site, while Precast involves casting concrete elements off site and transporting them to the construction site.

CIP involves pouring concrete on site and allowing it to cure in place.
Precast involves casting concrete elements in a controlled environment off site.
CIP allows for more flexibility in design changes during construction.
Precast elements are typically more unifo...

Answered by AI

View 1 more answer

Q3. Is tilt-up wall panel CIP or Precast?

Ans.

Tilt-up wall panels are typically precast.

Tilt-up wall panels are usually precast concrete panels that are cast on site and then lifted into place.
CIP (Cast-in-Place) wall panels are poured and cured on site without being lifted into place.
Precast panels are manufactured off-site in a controlled environment and then transported to the construction site for installation.

Answered by AI

View 1 more answer

Q4. Define point of contraflexure.

Ans.

Point of contraflexure is the location in a beam where the bending moment changes sign.

Point of contraflexure is where the bending moment is zero.
It is the point where the beam changes from sagging to hogging or vice versa.
It is typically located at a support or a point of concentrated load.
Example: In a simply supported beam with a uniformly distributed load, the point of contraflexure is at the center.

Answered by AI

Add your answer

Q5. Nominal cover vs Effective cover.

Ans.

Nominal cover is the specified distance between the outer surface of the concrete and the reinforcement, while effective cover is the actual distance after accounting for deviations.

Nominal cover is the distance specified in design drawings or codes.
Effective cover takes into account factors like tolerances, deviations, and surface irregularities.
For example, if nominal cover is 25mm and there is a deviation of 5mm, th

Answered by AI

View 1 more answer

Q6. Class 1 vs Class 2 lap.

Ans.

Class 1 lap is when one bar is lapped over another and Class 2 lap is when both bars are lapped over each other.

Class 1 lap involves lapping one bar over another.
Class 2 lap involves lapping both bars over each other.
Class 1 lap is commonly used for smaller diameter bars.
Class 2 lap is commonly used for larger diameter bars.

Answered by AI

View 1 more answer

Q7. Difference between Lap & Development length?

Ans.

Lap length is the length of overlap between two reinforcing bars, while development length is the length required to transfer the stress from the bar into the concrete.

Lap length is used to ensure continuity of reinforcement along the length of the bar.
Development length is used to ensure proper bond between the reinforcing bar and the concrete.
Lap length is typically specified in terms of diameter of the bar, while de...

Answered by AI

View 1 more answer

Q8. What is Anchorage Length?

Ans.

Anchorage length is the length of the embedded portion of a reinforcing bar required to transfer the load from the bar to the surrounding concrete.

Anchorage length is determined by the type of bar, concrete strength, and design loads.
It is important for ensuring the stability and strength of a structure.
Examples of anchorage length include development length for beams and lap splice length for columns.

Answered by AI

View 1 more answer

Round 3 - Assignment

Generate RCC detailed sheet for wall, column, beam , slab & foundation with BBS?

Round 4 - HR

(3 Questions)

Q1. Why you join this company?

Add your answer

Q2. What is your salary expectation?

Add your answer

Q3. What you expect from your job role?

Add your answer

Interview Preparation Tips

Topics to prepare for Pinnacle Infotech Rebar Detailer interview:

Rebar
AutoCAD
Rebar CAD
REVIT

Interview preparation tips for other job seekers - Be confident and take a moment to think before answering any question. Always defend your expected salary with proper facts and figures. Be very clear about your strengths and your contribution towards the job.

Rebar Detailer Interview Questions asked at other Companies

Q1. Which type of structure you can detail, which element you can detail.

View answer (2)

Data Analyst Interview Questions & Answers

Anonymous

posted on 18 Oct 2024

Interview experience

Excellent

Difficulty level

Process Duration

Result

Round 1 - Technical

(5 Questions)

Q1. Tell Me About Your self

Ans.

I am a data analyst with a strong background in statistics and data visualization.

Graduated with a degree in Statistics
Proficient in data analysis tools such as Python and SQL
Experience in creating insightful data visualizations
Strong problem-solving skills

Answered by AI

Add your answer

Q2. Elaborate on your internship Experience

Ans.

I completed a data analysis internship at XYZ Company, where I worked on various projects involving data cleaning, visualization, and predictive modeling.

Worked on cleaning and organizing large datasets
Created data visualizations to present findings to stakeholders
Utilized statistical techniques for predictive modeling
Collaborated with team members to analyze and interpret data
Presented findings and recommendations to

Answered by AI

Add your answer

Q3. Explain About Your Project

Ans.

Developed a predictive model to forecast sales based on historical data

Collected and cleaned sales data from multiple sources
Performed exploratory data analysis to identify trends and patterns
Built a machine learning model using regression techniques
Evaluated model performance using metrics like RMSE and MAE

Answered by AI

Add your answer

Q4. What do you know about our company

Ans.

Your company is a leading tech firm specializing in data analytics solutions.

Your company was founded in 2010 and has since become a key player in the data analytics industry.
You offer a range of data analytics services to help businesses make informed decisions.
Your company has a strong reputation for delivering high-quality and innovative solutions.
Some of your notable clients include Fortune 500 companies and leadin

Answered by AI

Add your answer

Q5. Any question for me

Add your answer

Data Analyst Interview Questions asked at other Companies

Q1. Suppose there is a room in the office and X people enter room throughout the day, Y people leave throughout the day [continuously people are entering the room, some are staying there, and rest are going out] .. so tell me the code to calcul... read more

View answer (11)

Pinnacle Infotech Interview Questions and Answers for Freshers

BIM Engineer Interview Questions & Answers

Anonymous

posted on 19 Nov 2024

Interview experience

Excellent

Difficulty level

Moderate

Process Duration

Less than 2 weeks

Result

Selected

I applied via Approached by Company and was interviewed in Oct 2024. There were 3 interview rounds.

Round 1 - Group Discussion

Questions based on job profile and relevant softwares (REVIT)

Round 2 - Technical

(1 Question)

Q1. Technical and Aptitude questions related to field of job

Add your answer

Round 3 - HR