Pinnacle Infotech Interview Questions, Process, and Tips

Q1. What is RCC? Where it is used?
Ans. 
RCC stands for Reinforced Cement Concrete. It is a composite material made of concrete and steel reinforcement bars.
• RCC is commonly used in construction for buildings, bridges, dams, and other structures.

• It provides strength and durability to the structure by combining the compressive strength of concrete with the tensile strength of steel reinforcement.

• Examples of RCC structures include high-rise buildings, parking ga
Answered by AI
View 1 more answer
Q2. Difference between CIP & Precast?
Ans. 
CIP (Cast-In-Place) involves pouring concrete on site, while Precast involves casting concrete elements off site and transporting them to the construction site.
• CIP involves pouring concrete on site and allowing it to cure in place.

• Precast involves casting concrete elements in a controlled environment off site.

• CIP allows for more flexibility in design changes during construction.

• Precast elements are typically more unifo...read more
Answered by AI
View 1 more answer
Q3. Is tilt-up wall panel CIP or Precast?
Ans. 
Tilt-up wall panels are typically precast.
• Tilt-up wall panels are usually precast concrete panels that are cast on site and then lifted into place.

• CIP (Cast-in-Place) wall panels are poured and cured on site without being lifted into place.

• Precast panels are manufactured off-site in a controlled environment and then transported to the construction site for installation.
Answered by AI
View 1 more answer
Q4. Define point of contraflexure.
Ans. 
Point of contraflexure is the location in a beam where the bending moment changes sign.
• Point of contraflexure is where the bending moment is zero.

• It is the point where the beam changes from sagging to hogging or vice versa.

• It is typically located at a support or a point of concentrated load.

• Example: In a simply supported beam with a uniformly distributed load, the point of contraflexure is at the center.
Answered by AI
Add your answer
Q5. Nominal cover vs Effective cover.
Ans. 
Nominal cover is the specified distance between the outer surface of the concrete and the reinforcement, while effective cover is the actual distance after accounting for deviations.
• Nominal cover is the distance specified in design drawings or codes.

• Effective cover takes into account factors like tolerances, deviations, and surface irregularities.

• For example, if nominal cover is 25mm and there is a deviation of 5mm, th
Answered by AI
View 1 more answer
Q6. Class 1 vs Class 2 lap.
Ans. 
Class 1 lap is when one bar is lapped over another and Class 2 lap is when both bars are lapped over each other.
• Class 1 lap involves lapping one bar over another.

• Class 2 lap involves lapping both bars over each other.

• Class 1 lap is commonly used for smaller diameter bars.

• Class 2 lap is commonly used for larger diameter bars.
Answered by AI
View 1 more answer
Q7. Difference between Lap & Development length?
Ans. 
Lap length is the length of overlap between two reinforcing bars, while development length is the length required to transfer the stress from the bar into the concrete.
• Lap length is used to ensure continuity of reinforcement along the length of the bar.

• Development length is used to ensure proper bond between the reinforcing bar and the concrete.

• Lap length is typically specified in terms of diameter of the bar, while de...read more
Answered by AI
View 1 more answer
Q8. What is Anchorage Length?
Ans. 
Anchorage length is the length of the embedded portion of a reinforcing bar required to transfer the load from the bar to the surrounding concrete.
• Anchorage length is determined by the type of bar, concrete strength, and design loads.

• It is important for ensuring the stability and strength of a structure.

• Examples of anchorage length include development length for beams and lap splice length for columns.
Answered by AI
View 1 more answer

Generate RCC detailed sheet for wall, column, beam , slab & foundation with BBS?

Q1. Why you join this company?
Add your answer
Q2. What is your salary expectation?
Add your answer
Q3. What you expect from your job role?
Add your answer

Basic aptitude questions with some questions based on AutoCAD

Same as we were told in colleges

Q1. Tell me about yourself
Add your answer
Q2. Why you want to come in corporate sector
Add your answer
Q3. Do you know about policies of this company
Add your answer

Online aptitude test for all campus hires

You have to speak on a topic in English

Q1. Why you choose to join pinnacle
Add your answer
Q2. What are your goal if you are selected
Add your answer

Q1. General Technical questions about tool
Add your answer
Q2. Knowledge of Industry
Add your answer