Filter interviews by
I applied via Walk-in and was interviewed in Jul 2021. There were 3 interview rounds.
Troubleshooting problems in solid oral production.
Identify the root cause of the problem
Review the manufacturing process and equipment
Check the quality of raw materials
Adjust the formulation or process parameters
Perform in-process testing and analysis
Collaborate with cross-functional teams
Document findings and solutions
Implement corrective actions
Monitor and evaluate the effectiveness of solutions
The production process involves various activities and steps that are followed to manufacture a product.
The process flow starts with the raw materials being received and inspected.
The materials are then stored and transported to the production area.
The production process involves various stages such as mixing, heating, cooling, and packaging.
Quality checks are performed at each stage to ensure that the product meets th...
I applied via Recruitment Consultant and was interviewed before Jan 2021. There was 1 interview round.
I applied via Company Website and was interviewed before Dec 2020. There were 3 interview rounds.
Filling machine can be qualified by performing various tests and inspections.
Performing visual inspection of the machine
Checking the accuracy of the filling volume
Testing the machine's speed and efficiency
Verifying the machine's compatibility with the product being filled
Ensuring the machine meets regulatory requirements
Conducting validation tests to ensure consistent performance
Media fill frequency depends on the risk level of the product and process.
Media fill should be performed at least once per shift for high-risk products and processes.
For low-risk products and processes, media fill can be performed less frequently.
The frequency of media fill should be determined by the validation team based on risk assessment.
Media fill should also be performed after any significant process changes or e...
Media fill duration is the time taken to complete a simulation of aseptic manufacturing process.
Media fill is a simulation of the aseptic manufacturing process.
It involves filling sterile media into containers under aseptic conditions.
The duration of media fill depends on the product being manufactured and the process being simulated.
Typically, media fill can take anywhere from a few hours to a few days.
The duration of...
Smoke study is a process of introducing smoke into a controlled environment to observe the flow of air or gas.
It is used to identify leaks or blockages in ventilation systems.
It can also be used to test the effectiveness of air filtration systems.
Smoke study is commonly used in industries such as pharmaceuticals, food processing, and HVAC.
The smoke used in the study is usually non-toxic and harmless to humans and anima
posted on 6 Sep 2023
I applied via Walk-in and was interviewed before Sep 2022. There were 3 interview rounds.
posted on 5 Apr 2021
I applied via Referral and was interviewed in Oct 2020. There was 1 interview round.
posted on 25 Oct 2022
I applied via Approached by Company and was interviewed before Oct 2021. There was 1 interview round.
Distillation is a process of separating components of a mixture based on their boiling points.
There are two main types of distillation: batch distillation and continuous distillation.
Batch distillation involves separating a mixture into its components in a single batch, while continuous distillation involves a continuous feed of the mixture.
Other types of distillation include vacuum distillation, steam distillation, an...
Pumps and valves are used in various industries for fluid control. There are different types of pumps and valves for different applications.
Types of pumps: centrifugal, positive displacement, axial flow, and jet pumps
Types of valves: ball, gate, globe, butterfly, needle, and diaphragm valves
Pumps are used to move fluids from one place to another, while valves are used to control the flow of fluids
Centrifugal pumps are ...
A packed bed column is a type of chemical reactor used for separation and purification processes.
Consists of a cylindrical column filled with a packing material
Fluid is passed through the column and interacts with the packing material
Used in various industries such as chemical, pharmaceutical, and food processing
Examples include distillation columns and gas absorption columns
Centrifugal pumps work on the principle of converting rotational kinetic energy into hydrodynamic energy.
The pump has an impeller that rotates and creates a centrifugal force, which pushes the fluid towards the outer edge of the impeller
The fluid then enters the volute casing, where the kinetic energy is converted into pressure energy
The pressure energy then forces the fluid out of the pump and into the piping system
Ce...
Bernoulli's equation relates the pressure, velocity, and height of a fluid in motion.
The equation is based on the principle of conservation of energy.
It is commonly used in fluid mechanics and aerodynamics.
The equation can be used to calculate the pressure difference between two points in a fluid flow.
It is also used to explain phenomena such as lift in airplane wings and the flow of blood in arteries.
The equation is n
Heat exchangers are devices that transfer heat between two or more fluids.
Types include shell and tube, plate and frame, and air-cooled
Shell and tube exchangers are commonly used in chemical and oil refineries
Plate and frame exchangers are used in HVAC systems and food processing
Air-cooled exchangers are used in power plants and natural gas processing
Heat exchangers are also used in refrigeration and air conditioning s
posted on 3 Jul 2024
GMP stands for Good Manufacturing Practice, a set of guidelines ensuring products are consistently produced and controlled according to quality standards.
GMP is a system for ensuring that products are consistently produced and controlled according to quality standards.
It is designed to minimize the risks involved in any pharmaceutical production that cannot be eliminated through testing the final product.
Examples of GM...
I applied via Approached by Company and was interviewed before May 2022. There were 2 interview rounds.
Deviation refers to the difference between an expected or planned outcome and the actual outcome.
It is a measure of how far a result is from the expected or average result.
Deviation can be positive or negative depending on whether the actual result is higher or lower than expected.
It is commonly used in statistics to measure the variability of a set of data.
For example, if the average height of a group of people is 5'6...
Change controls are procedures used to manage changes to a product or process.
Change controls ensure that changes are properly evaluated, approved, and implemented
They help to prevent errors, defects, and deviations from specifications
Examples include changes to manufacturing processes, equipment, or materials
Documentation and record-keeping are important aspects of change controls
There are various types of deviation that can occur in production processes.
Material deviation - when the raw materials used in production are different from the specified ones
Process deviation - when the production process deviates from the standard operating procedure
Equipment deviation - when the equipment used in production is not functioning as intended
Environmental deviation - when external factors such as temper...
Change controls are procedures used to manage changes to a product or process.
Document change requests
Evaluate impact of change
Obtain approval from relevant parties
Implement change
Verify effectiveness of change
Maintain records of change
Types include: design, process, equipment, material, and supplier changes
Corrective action is taken to fix a problem that has already occurred, while preventive action is taken to avoid a problem from happening in the future.
Corrective action is reactive, while preventive action is proactive.
Corrective action is taken after a problem has been identified, while preventive action is taken before a problem occurs.
Examples of corrective action include repairing a machine that has broken down, w...
posted on 29 Jan 2025
I appeared for an interview in Dec 2024.
Akums industry offers significant growth opportunities and fosters a positive work environment.
Akums industry is experiencing steady growth due to increasing demand for pharmaceutical products.
The company has a strong presence in both domestic and international markets, allowing for expansion and diversification.
Akums industry invests in research and development, leading to innovation and new product offerings.
The comp...
I applied via Walk-in and was interviewed before Jul 2021. There was 1 interview round.
It is important to check all RM, equipment, and utility before batch charging to ensure quality and safety.
Inspect all raw materials for quality and quantity
Check equipment for cleanliness and proper functioning
Ensure all utilities (water, electricity, etc.) are available and functioning properly
Verify that all safety measures are in place
Perform necessary calibrations and validations
Document all checks and inspections
based on 15 reviews
Rating in categories
Junior Officer
254
salaries
| ₹1.8 L/yr - ₹3.6 L/yr |
Territory Executive
238
salaries
| ₹3.2 L/yr - ₹8.3 L/yr |
Junior Associate
148
salaries
| ₹2 L/yr - ₹3.6 L/yr |
Health Care Executive
145
salaries
| ₹3.6 L/yr - ₹9.4 L/yr |
Executive
135
salaries
| ₹2.9 L/yr - ₹7.5 L/yr |
Cipla
Dr. Reddy's
Lupin
Zydus Lifesciences