Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Padmini VNA Mechatronics Team. If you also belong to the team, you can get access from here

Padmini VNA Mechatronics Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Padmini VNA Mechatronics Quality Assurance Quality Control Engineer Interview Questions and Answers

Updated 31 Aug 2024

Padmini VNA Mechatronics Quality Assurance Quality Control Engineer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is vernier list count
  • Ans. 

    Vernier list count is a method used in quality control to track and count the number of items in a list.

    • Vernier list count is a technique used to accurately count items in a list or inventory.

    • It involves using a vernier scale or caliper to measure and count the items with precision.

    • This method is commonly used in manufacturing and quality control processes to ensure accurate inventory management.

    • For example, in a produ...

  • Answered by AI
  • Q2. What is the quality
  • Ans. 

    Quality is the degree of excellence of a product or service as perceived by the customer.

    • Quality is meeting or exceeding customer expectations

    • It involves consistency, reliability, and durability

    • Quality is achieved through effective quality assurance and quality control processes

    • Examples: meeting specifications, absence of defects, customer satisfaction

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Filled Ipcs poka yoke

I applied via Naukri.com and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Regarding subject related
  • Q2. Electronics components testing

Interview Preparation Tips

Interview preparation tips for other job seekers - Just keep focus on resume ,all the questions will be ask from CV

I applied via Recruitment Consulltant and was interviewed before Apr 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(7 Questions)

  • Q1. What are your salary expectations?
  • Q2. What is your family background?
  • Q3. Share details of your previous job.
  • Q4. Why should we hire you?
  • Q5. Why are you looking for a change?
  • Q6. What are your strengths and weaknesses?
  • Q7. Tell me about yourself.
Round 3 - Technical 

(2 Questions)

  • Q1. As per your current profile
  • Q2. Japanise Methodology like 4 M change, 5 S, IATF, OSASH, Safety, TPM, etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - know about FCC clutch india pvt. ltd, study about your resume well,
salary no bar for good condidate,
answer all questions honesty because they are collect all information from your given details.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. 1)HPDC process calculation. 2)What is 5S . 3)Kaizen implementation 4) How to reduce process Rejection 5) Plan Vs Actual 6)
  • Ans. 

    The question includes topics such as HPDC process calculation, 5S, Kaizen implementation, reducing process rejection, and plan vs actual.

    • HPDC process calculation involves determining the parameters for high-pressure die casting.

    • 5S is a methodology for workplace organization and standardization.

    • Kaizen is a continuous improvement approach that focuses on small incremental changes.

    • To reduce process rejection, one can impl...

  • Answered by AI
  • Q2. 1)Non fill check water leakage 2) metal temp
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Jul 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. What are Iatf clauses
  • Ans. 

    IATF clauses refer to specific requirements outlined in the International Automotive Task Force standards for automotive quality management systems.

    • IATF clauses are essential components of the quality management system for automotive companies.

    • They outline specific requirements that must be met in order to achieve IATF certification.

    • Examples of IATF clauses include requirements for leadership commitment, risk managemen...

  • Answered by AI
  • Q2. Insert terminology
  • Q3. Mcodes g codes of cnc
  • Ans. 

    M codes and G codes are commands used in CNC machines to control various functions and operations.

    • M codes are used for miscellaneous functions like stopping the machine or changing tools.

    • G codes are used for specific movements and operations like cutting, drilling, or milling.

    • Examples of M codes: M00 (program stop), M06 (tool change), M30 (end of program)

    • Examples of G codes: G00 (rapid positioning), G01 (linear interpo

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Thorough reading of cv and last experience rej,cost,rew data
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Selected Selected

I appeared for an interview in Aug 2024.

Round 1 - Interview 

(2 Questions)

  • Q1. Any work related
  • Q2. Family background

I applied via Recruitment Consulltant and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Basic information about Electronic Sourcing & suppliers for active and passive components
Round 3 - Technical 

(1 Question)

  • Q1. About sourcing process in details. Questions about new product development.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident in all the answers. Most of the questions will be based on your prior experience.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Hr after technical after plant head & president
Round 3 - Technical 

(1 Question)

  • Q1. Process & experience relative question

Interview Preparation Tips

Interview preparation tips for other job seekers - Designation & other question &salary & self introduction
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Why you are leaving your last company?
  • Ans. 

    Seeking new challenges and growth opportunities.

    • Looking for a more challenging role that aligns with my career goals.

    • Seeking a company with a better work-life balance.

    • Wanting to expand my skill set and learn new technologies.

    • Desire for career advancement and professional development.

    • Company restructuring or downsizing.

    • Relocation or commute issues.

    • Unsatisfactory work environment or culture.

    • Lack of recognition or appreci...

  • Answered by AI
Round 3 - Technical 

(3 Questions)

  • Q1. How many manpower you can handle?
  • Ans. 

    As a Production Engineer, I can handle a team of skilled manpower efficiently.

    • I have experience managing teams of up to 20 people in my previous role.

    • I am skilled in delegating tasks, setting priorities, and ensuring smooth workflow.

    • I believe in effective communication and fostering a positive work environment.

    • I can handle manpower by assessing their skills, assigning appropriate tasks, and providing necessary guidance...

  • Answered by AI
  • Q2. How to calculate OEE, 7 QC tools, TPM, JH steps, SPC
  • Ans. 

    Explanation of how to calculate OEE, 7 QC tools, TPM, JH steps, SPC

    • OEE = Availability x Performance x Quality

    • 7 QC tools include Pareto chart, fishbone diagram, control chart, etc.

    • TPM involves total employee involvement in maintenance

    • JH steps include job analysis, job design, job instruction, etc.

    • SPC involves statistical analysis of process data

  • Answered by AI
  • Q3. Which type of tools you can use in this given drawing.
  • Ans. 

    Tools that can be used in the given drawing for Production Engineer.

    • CAD software like AutoCAD, SolidWorks, etc. for designing and drafting

    • CAM software like Mastercam, EdgeCAM, etc. for creating toolpaths and generating G-code

    • CNC machines for cutting, drilling, and shaping the parts

    • Measuring tools like calipers, micrometers, etc. for quality control

    • Hand tools like wrenches, pliers, etc. for assembly and maintenance

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You must have deeply knowledge in the topics which you have mentioned in your CV.

Padmini VNA Mechatronics Interview FAQs

How many rounds are there in Padmini VNA Mechatronics Quality Assurance Quality Control Engineer interview?
Padmini VNA Mechatronics interview process usually has 1 rounds. The most common rounds in the Padmini VNA Mechatronics interview process are Technical.
What are the top questions asked in Padmini VNA Mechatronics Quality Assurance Quality Control Engineer interview?

Some of the top questions asked at the Padmini VNA Mechatronics Quality Assurance Quality Control Engineer interview -

  1. What is vernier list co...read more
  2. What is the qual...read more

Tell us how to improve this page.

Padmini VNA Mechatronics Quality Assurance Quality Control Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Knorr-Bremse Interview Questions
3.9
 • 56 Interviews
Goodyear Interview Questions
3.6
 • 56 Interviews
FCC Clutch Interview Questions
4.0
 • 36 Interviews
Hi Tech Gears Interview Questions
3.7
 • 26 Interviews
Greaves Cotton Interview Questions
4.1
 • 24 Interviews
Fiem Industries Interview Questions
3.6
 • 22 Interviews
View all

Padmini VNA Mechatronics Quality Assurance Quality Control Engineer Reviews and Ratings

based on 1 review

3.0/5

Rating in categories

4.0

Skill development

3.0

Work-life balance

2.0

Salary

3.0

Job security

4.0

Company culture

2.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Assistant Manager
112 salaries
unlock blur

₹5.3 L/yr - ₹12.5 L/yr

Senior Engineer
80 salaries
unlock blur

₹4 L/yr - ₹8 L/yr

Deputy Manager
78 salaries
unlock blur

₹8 L/yr - ₹19.6 L/yr

Engineer
59 salaries
unlock blur

₹2.9 L/yr - ₹5.5 L/yr

Junior Engineer
58 salaries
unlock blur

₹2.1 L/yr - ₹4.1 L/yr

Explore more salaries
Compare Padmini VNA Mechatronics with

Knorr-Bremse

3.8
Compare

Greaves Cotton

4.1
Compare

Goodyear

3.6
Compare

FCC Clutch

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview