Filter interviews by
I applied via Company Website and was interviewed in Dec 2023. There were 2 interview rounds.
SMT mounting flow chart is a visual representation of the steps involved in surface mount technology component mounting process.
SMT components are picked and placed on the PCB using automated equipment.
Components are then soldered onto the PCB using reflow soldering or wave soldering techniques.
Inspection and testing are done to ensure proper component placement and soldering.
Final inspection and quality control checks...
UPH stands for Units Per Hour, Line of Balance is a scheduling technique, PPM stands for Parts Per Million in quality control.
UPH (Units Per Hour) is a measure of productivity in manufacturing, indicating the number of units produced in an hour.
Line of Balance is a scheduling technique used in project management to track progress and ensure resources are allocated efficiently.
PPM (Parts Per Million) is a measure of qua...
I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.
A capacitor is an electronic component that stores and releases electrical energy.
Capacitors are used to filter out noise in electronic circuits.
They can store energy and release it quickly when needed.
Capacitors are commonly used in power supplies, audio equipment, and electronic devices.
Examples include ceramic capacitors, electrolytic capacitors, and tantalum capacitors.
SMT process stands for Surface Mount Technology process, which involves mounting electronic components directly onto the surface of a printed circuit board (PCB).
Involves placing electronic components onto the surface of a PCB
Utilizes solder paste to attach components to the board
Involves reflow soldering to melt the solder and create a permanent bond
Can include inspection and testing steps to ensure quality
Common in m
A transistor is a semiconductor device used to amplify or switch electronic signals and electrical power.
Transistors are fundamental building blocks of modern electronic devices.
They can amplify signals, regulate currents, and act as switches.
Common types of transistors include bipolar junction transistors (BJTs) and field-effect transistors (FETs).
npm Mounter is a tool used to mount npm packages as local directories for development purposes.
npm Mounter allows developers to work on npm packages locally without publishing them to the npm registry.
It helps in testing and debugging npm packages before final deployment.
Developers can use npm Mounter to easily switch between different versions of npm packages during development.
Example: npm-mounter mount my-package
Top trending discussions
A wire harness is a collection of wires, cables, and connectors that transmit electrical signals and power between different components in a system.
Wire harnesses provide a neat and organized way to route and protect wires in a system.
They ensure proper connectivity and prevent wire damage or short circuits.
Wire harnesses simplify troubleshooting and maintenance by allowing easy identification and replacement of faulty...
Sputtering is a process used in manufacturing to deposit thin films of material onto a surface.
Sputtering is a physical vapor deposition technique.
It involves bombarding a target material with high-energy ions or atoms.
This bombardment dislodges atoms from the target material, which then deposit onto a substrate.
Sputtering is commonly used in the production of semiconductor devices, solar cells, and thin film coatings.
...
I applied via Approached by Company and was interviewed before Feb 2021. There were 3 interview rounds.
I applied via Approached by Company and was interviewed before Jun 2022. There were 5 interview rounds.
Sub cooling in air conditioning is the process of cooling the refrigerant below its saturation temperature to improve system efficiency.
Sub cooling increases the efficiency of the air conditioning system by ensuring the refrigerant is in a liquid state before entering the expansion valve.
It helps in preventing flash evaporation of the refrigerant, which can lead to inefficiencies in the system.
Sub cooling is typically ...
ISEER rating is calculated based on the weighted average of the cooling performance of an air conditioner under different conditions.
ISEER = (Weighted Cooling Capacity at 100% load x 0.4) + (Weighted Cooling Capacity at 75% load x 0.2) + (Weighted Cooling Capacity at 50% load x 0.4)
The higher the ISEER rating, the more energy efficient the air conditioner is.
ISEER rating helps consumers compare the energy efficiency of...
The refrigeration cycle is a thermodynamic cycle used in refrigerators and air conditioning systems to transfer heat from a low temperature to a high temperature environment.
The cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.
The refrigerant enters the compressor as a low-pressure gas and leaves as a high-pressure, high-temperature gas.
The high-pressure gas then flows into...
Mainstream refrigerants used in household air conditioning include R-410A, R-22, and R-134a.
R-410A is a popular refrigerant known for its high efficiency and environmental friendliness.
R-22, although being phased out due to its ozone-depleting properties, is still commonly found in older air conditioning systems.
R-134a is commonly used in automotive air conditioning systems but can also be found in some household units
1 ton cooling concept refers to the amount of heat required to melt one ton of ice in a 24-hour period.
1 ton of cooling is equal to 12,000 BTUs per hour
It is commonly used in the HVAC industry to measure the cooling capacity of air conditioning systems
For example, a 2-ton air conditioner can remove 24,000 BTUs of heat per hour
The relationship between current, voltage, and power is described by Ohm's Law, which states that current is directly proportional to voltage and inversely proportional to resistance.
Ohm's Law states that V = I * R, where V is voltage, I is current, and R is resistance.
Power (P) is calculated using the formula P = V * I, where P is power, V is voltage, and I is current.
In a circuit with a constant resistance, an increa...
1 BTU is approximately equal to 0.29307107 watts. To convert BTU to watts, multiply by 0.29307107. To convert watts to BTU, divide by 0.29307107.
1 BTU = 0.29307107 watts
To convert BTU to watts, multiply by 0.29307107
To convert watts to BTU, divide by 0.29307107
I applied via Job Portal
Increasing product efficiency can be achieved through optimizing processes, improving technology, and enhancing employee skills.
Optimize production processes to eliminate waste and improve workflow
Upgrade technology to automate tasks and improve accuracy
Provide training and development opportunities for employees to enhance their skills and knowledge
I would improve the user interface to enhance user experience and streamline navigation.
Enhance user interface design for better usability
Streamline navigation to improve user experience
Implement user feedback to make necessary changes
Optimize performance for faster loading times
I applied via Approached by Company and was interviewed in Apr 2024. There was 1 interview round.
Types of process include batch process, continuous process, and hybrid process.
Batch process involves processing a set amount of materials at one time
Continuous process involves ongoing production without interruption
Hybrid process combines elements of both batch and continuous processes
I applied via Job Portal and was interviewed in Oct 2023. There were 2 interview rounds.
1 hour - Trees, Array, Hashmap, DP, CP etc
based on 2 interviews
Interview experience
based on 8 reviews
Rating in categories
Receptionist
322
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
123
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Officer
120
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
111
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
87
salaries
| ₹0 L/yr - ₹0 L/yr |
Samsung
LG Electronics
Sony
Panasonic Avionics Corporation