i
Kirloskar Pneumatic
Filter interviews by
I applied via Naukri.com and was interviewed in Aug 2019. There were 5 interview rounds.
Refrigeration is the process of removing heat from a substance or space to lower its temperature.
Refrigeration is used in various industries such as food preservation, medicine, and air conditioning.
It involves the use of refrigerants, which are substances that can absorb and release heat.
The process of refrigeration involves compressing the refrigerant, condensing it into a liquid, and then expanding it to evaporate a...
1 ton refrigeration is the amount of heat required to melt one ton of ice in 24 hours.
1 ton refrigeration is equal to 12,000 BTU/hr or 3.517 kW.
It is a unit of measurement used to describe the cooling capacity of a refrigeration system.
For example, a 2 ton refrigeration system can remove twice as much heat as a 1 ton system.
The term 'ton' in 1 ton refrigeration refers to the amount of heat required to melt one ton of i...
Top trending discussions
The direction a motor runs depends on the type of motor and the wiring configuration.
The direction of rotation can be determined by the motor's design and the direction of the current flow.
Some motors can run in both clockwise and counterclockwise directions depending on the wiring.
Reversing the polarity of the power supply can change the direction of rotation in some motors.
Delta connection in motor terminal box is made by connecting the three motor terminals in a triangular configuration.
Connect the three motor terminals labeled U, V, and W in a triangular configuration.
Ensure proper insulation and secure connections to prevent short circuits.
Use appropriate tools and follow manufacturer's guidelines for wiring.
Double check the connections before powering up the motor to avoid damage.
Con...
posted on 14 Oct 2023
I applied via Newspaper Ad and was interviewed before Oct 2022. There was 1 interview round.
First Angle Projection and Third Angle Projection can be distinguished by the position of the object and the projection planes.
First Angle Projection places the object in the first quadrant and the projection planes are placed between the object and the observer.
Third Angle Projection places the object in the third quadrant and the projection planes are placed behind the object.
In First Angle Projection, the views are ...
The choice between hole standard system and shaft standard system depends on the specific requirements and constraints of the engineering project.
Hole standard system: Uses a fixed hole size and allows for variation in the shaft size. It is commonly used in applications where the hole is critical, such as bearings or press fits.
Shaft standard system: Uses a fixed shaft size and allows for variation in the hole size. It...
No, the employee should not be allowed to take duty after consuming alcohol.
Allowing an employee to work after consuming alcohol can pose serious safety risks.
Alcohol impairs judgment, coordination, and reaction time, which are crucial for a service engineer's job.
It can lead to accidents, errors, and compromised customer service.
The company should have a clear policy on alcohol consumption and enforce it consistently.
...
An accident is an unexpected and undesirable event that causes harm or damage. Precautions to prevent accidents include proper training, following safety protocols, and maintaining equipment.
Accidents are events that occur unexpectedly and result in harm or damage.
Preventing accidents involves taking precautions and following safety measures.
Proper training is essential to ensure employees are aware of potential hazard...
Types of fire include Class A, B, C, D, and K. Fire protection measures include fire extinguishers, sprinkler systems, and fire alarms. Assembling points are designated safe areas during emergencies.
Types of fire: Class A (ordinary combustibles), Class B (flammable liquids), Class C (electrical fires), Class D (flammable metals), and Class K (cooking oils and fats)
Fire protection measures: fire extinguishers, sprinkler...
I would immediately follow the company's bomb threat protocol and notify the appropriate authorities.
Remain calm and composed
Follow the company's bomb threat protocol
Notify the office management or security team
Evacuate the office if instructed to do so
Cooperate fully with law enforcement agencies
Do not touch any suspicious objects or packages
I applied via Referral and was interviewed in Mar 2021. There were 3 interview rounds.
Low gas pressure can lead to various issues like inefficient operation or equipment failure. Corrective actions include checking for leaks, adjusting regulators, and ensuring proper ventilation.
Check for leaks in the gas system
Adjust regulators to increase gas pressure
Ensure proper ventilation for gas combustion
Inspect gas supply lines for blockages or restrictions
Verify that gas appliances are functioning properly
I have 5 years of experience in the field and my current total CTC is $60,000.
5 years of experience in service engineering
Current total CTC is $60,000
Experience includes troubleshooting, maintenance, and repair of equipment
I applied via Naukri.com and was interviewed in Dec 2023. There were 2 interview rounds.
By conducting thorough system analysis, testing, and utilizing diagnostic tools.
Conduct thorough system analysis to understand the system's functionality and potential issues.
Perform testing to identify any abnormalities or malfunctions in the system or equipment.
Utilize diagnostic tools such as multimeters, oscilloscopes, and software programs to pinpoint errors.
Review error logs and system documentation for clues on ...
posted on 14 Oct 2023
I applied via Newspaper Ad and was interviewed before Oct 2022. There was 1 interview round.
First Angle Projection and Third Angle Projection can be distinguished by the position of the object and the projection planes.
First Angle Projection places the object in the first quadrant and the projection planes are placed between the object and the observer.
Third Angle Projection places the object in the third quadrant and the projection planes are placed behind the object.
In First Angle Projection, the views are ...
The choice between hole standard system and shaft standard system depends on the specific requirements and constraints of the engineering project.
Hole standard system: Uses a fixed hole size and allows for variation in the shaft size. It is commonly used in applications where the hole is critical, such as bearings or press fits.
Shaft standard system: Uses a fixed shaft size and allows for variation in the hole size. It...
No, the employee should not be allowed to take duty after consuming alcohol.
Allowing an employee to work after consuming alcohol can pose serious safety risks.
Alcohol impairs judgment, coordination, and reaction time, which are crucial for a service engineer's job.
It can lead to accidents, errors, and compromised customer service.
The company should have a clear policy on alcohol consumption and enforce it consistently.
...
An accident is an unexpected and undesirable event that causes harm or damage. Precautions to prevent accidents include proper training, following safety protocols, and maintaining equipment.
Accidents are events that occur unexpectedly and result in harm or damage.
Preventing accidents involves taking precautions and following safety measures.
Proper training is essential to ensure employees are aware of potential hazard...
Types of fire include Class A, B, C, D, and K. Fire protection measures include fire extinguishers, sprinkler systems, and fire alarms. Assembling points are designated safe areas during emergencies.
Types of fire: Class A (ordinary combustibles), Class B (flammable liquids), Class C (electrical fires), Class D (flammable metals), and Class K (cooking oils and fats)
Fire protection measures: fire extinguishers, sprinkler...
I would immediately follow the company's bomb threat protocol and notify the appropriate authorities.
Remain calm and composed
Follow the company's bomb threat protocol
Notify the office management or security team
Evacuate the office if instructed to do so
Cooperate fully with law enforcement agencies
Do not touch any suspicious objects or packages
I applied via Referral and was interviewed in Mar 2021. There were 3 interview rounds.
I applied via Job Fair and was interviewed in Dec 2023. There were 3 interview rounds.
based on 1 interview
Interview experience
based on 9 reviews
Rating in categories
Assistant Manager
185
salaries
| ₹5.5 L/yr - ₹12.9 L/yr |
Senior Engineer
147
salaries
| ₹3.1 L/yr - ₹10 L/yr |
Production Engineer
84
salaries
| ₹2.1 L/yr - ₹4.5 L/yr |
Manager
79
salaries
| ₹7.3 L/yr - ₹17.5 L/yr |
Service Engineer
54
salaries
| ₹2 L/yr - ₹5 L/yr |
Ingersoll Rand
ELGI Equipments
Atlas Copco
Kaeser Compressors India