Upload Button Icon Add office photos

Filter interviews by

Nuberg Engineering Chemical Graduate Engineer Trainee Interview Questions and Answers

Updated 24 Oct 2024

Nuberg Engineering Chemical Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. Laws of thermodynamics?
  • Ans. 

    Laws of thermodynamics are fundamental principles governing energy and heat transfer in physical systems.

    • First Law: Conservation of energy - energy cannot be created or destroyed, only transferred or converted.

    • Second Law: Entropy always increases in isolated systems - heat naturally flows from hot to cold objects.

    • Third Law: As temperature approaches absolute zero, entropy approaches a minimum value.

    • Examples: A car engi...

  • Answered by AI
  • Q2. Pressure increases or decreases with altitude?
  • Ans. 

    Pressure decreases with altitude due to the decrease in air density as altitude increases.

    • Pressure decreases by about 12% for every 1000 meters increase in altitude.

    • This is because as altitude increases, the air becomes less dense, leading to fewer air molecules exerting pressure.

    • For example, at sea level, the average atmospheric pressure is around 1013 hPa, while at the summit of Mount Everest, it is around 300 hPa.

  • Answered by AI
  • Q3. Explain Fourier Laws?
  • Ans. 

    Fourier Laws describe the heat transfer in materials.

    • Fourier's Law of Heat Conduction states that the rate of heat transfer through a material is proportional to the negative gradient of the temperature and the area normal to that gradient.

    • Fourier's Law of Heat Conduction equation: q = -k * A * (dT/dx), where q is the heat flux, k is the thermal conductivity, A is the cross-sectional area, and dT/dx is the temperature ...

  • Answered by AI
  • Q4. Questions related to internship
  • Q5. Why do you want for this company?

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jun 2024. There were 3 interview rounds.

Round 1 - Aptitude Test 

The aptitude test consisted of five sections: mathematics, general aptitude, general knowledge, professional course questions, and essay writing.

Round 2 - HR 

(1 Question)

  • Q1. Introduce about yourself
Round 3 - Technical 

(1 Question)

  • Q1. Technical question about refrigeration cycle
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Basic questions like in electrical basic units

Round 2 - Group Discussion 

They gave random topics like ev, digital india

Round 3 - Technical 

(2 Questions)

  • Q1. What is types of relay
  • Ans. 

    Types of relays include electromechanical relays, solid state relays, thermal relays, and reed relays.

    • Electromechanical relays use an electromagnet to mechanically operate the switch contacts.

    • Solid state relays use semiconductor devices to switch the circuit on and off.

    • Thermal relays use bimetallic strips to open or close the contacts based on temperature changes.

    • Reed relays use a reed switch enclosed in a coil to cont

  • Answered by AI
  • Q2. Personal questions about family

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at Malviya National Institute of Technology (NIT), Jaipur and was interviewed in Jan 2024. There were 3 interview rounds.

Round 1 - Group Discussion 

Gender Diversity in industry or organisations

Round 2 - Aptitude Test 

Reasonings and aptitude

Round 3 - Technical 

(3 Questions)

  • Q1. Difference Between Altornators and Generators
  • Ans. 

    Alternators produce AC current while generators produce DC current.

    • Alternators use a rotating magnetic field to generate alternating current (AC)

    • Generators use a stationary magnetic field to generate direct current (DC)

    • Alternators are more efficient and commonly used in modern vehicles

    • Generators are simpler in construction but less efficient than alternators

  • Answered by AI
  • Q2. Why the transmission line are in the multiple of 11? Like 11kV 22kV 33kV
  • Q3. Why we use ac apliances instead of dc apliances in our homes?
  • Ans. 

    AC appliances are used in homes because AC can be easily converted to different voltages, making it more versatile for household use.

    • AC can be easily converted to different voltages, making it more versatile for household use

    • AC is more efficient for long-distance power transmission

    • AC allows for the use of transformers to step up or step down voltage as needed

    • AC motors are simpler and cheaper than DC motors for many app

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Hilti Graduate Engineer interview:
  • Basic electrical engineering
  • Electrical Power System
Interview preparation tips for other job seekers - Be confident and show them you are intrested in company.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at PSG College of Technology, Coimbatore and was interviewed in Oct 2023. There were 4 interview rounds.

Round 1 - Aptitude Test 

The test conducted in mcq format and questions were based on general engineering concepts, aptitude and general knowledge.

Round 2 - Group Discussion 

Group discussion topic we were given was "role of engineers in building the country".

Round 3 - Technical 

(3 Questions)

  • Q1. Technical round questions were based on engineering graphics, material science and my final year project. All the questions were based on the details I gave in my resume
  • Q2. Difference between 1st angle and 3rd angle projection?
  • Ans. 

    1st angle projection is where the object is placed in the first quadrant, while 3rd angle projection is where the object is placed in the third quadrant.

    • 1st angle projection is commonly used in Europe and Asia, while 3rd angle projection is commonly used in North America.

    • In 1st angle projection, the object is imagined to be in the first quadrant and the plane of projection is between the observer and the object.

    • In 3rd ...

  • Answered by AI
  • Q3. What is stress and what is strain?
  • Ans. 

    Stress is the external force applied to an object, while strain is the resulting deformation or change in shape of the object.

    • Stress is the force applied to an object per unit area, measured in units like Pascals or Newtons per square meter.

    • Strain is the change in shape or size of an object in response to stress, measured as a ratio of the change to the original size.

    • Example: A rubber band being stretched represents st...

  • Answered by AI
Round 4 - HR 

(3 Questions)

  • Q1. What do I do in my free time, weekends
  • Q2. Why did I choose mechanical engineering
  • Q3. Why bonfiglioli
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2023. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

General cyber security questions

Round 3 - Technical 

(1 Question)

  • Q1. Technical manager will be interviewing with questions based on CV
Round 4 - One-on-one 

(1 Question)

  • Q1. Interviewed by Cyb.sec. manager and HR based on CV and position
Round 5 - One-on-one 

(1 Question)

  • Q1. Interviewed by Regional HR and Manager
Round 6 - HR 

(1 Question)

  • Q1. CTC and benifits are explained

Interview Preparation Tips

Interview preparation tips for other job seekers - Make sure you prepare a resume with only the stuffs and things you know.
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Aptitude, technical were asked questions were simple.

Round 3 - Group Discussion 

Gd topic was given and 5 min were given to prepare.

Round 4 - Technical 

(5 Questions)

  • Q1. In interview about ourself,family background and skills were asked.
  • Q2. Computer skills were asked such as solidworks,catia am I able to use or not no cross questions were done.
  • Q3. Will you able to work 8 hours a day standingon machine?
  • Ans. 

    Yes, I am physically capable of working 8 hours a day standing on a machine.

    • I have previous experience working in a similar environment where I had to stand for long periods of time.

    • I am physically fit and able to handle the demands of standing for extended periods.

    • I am willing to take breaks as needed to ensure my health and safety while working on the machine.

  • Answered by AI
  • Q4. Do you have bike or not?
  • Q5. Are you willingto relocate or not?
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
No response

I applied via Approached by Company and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Group Discussion 

DOES AI AFFECT HUMAN POWER

Round 3 - Technical 

(2 Questions)

  • Q1. MACHINE LEARNING BASICS
  • Q2. WHAT ARE THE PROJECTS HAVE YOU DONE BEFORE?

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well, Stand on your points

I applied via Referral and was interviewed in May 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Aptitude Test 

Basic easy engineering questions and general knowledge simple questions

Round 3 - Aptitude Test 

Simple aptitude test of 50marks, in which some technical questions and some general.

Round 4 - Technical 

(1 Question)

  • Q1. In which model test, simple solidworks sheet metal model will given to you And you have to do asembly with fully define and fine mass of that product
Round 5 - HR 

(1 Question)

  • Q1. General discussion about how will you work for one year and overtime. That's it

Interview Preparation Tips

Interview preparation tips for other job seekers - If you haven't any option then only join this companyl
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jan 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Do not use an unprofessional email address such as cool_boy@email.com. It shows a lack of professionalism by the candidate.
View all tips
Round 2 - Aptitude Test 

Technical core mechanical questions and basic aptitude test

Round 3 - HR 

(1 Question)

  • Q1. Details of CTC, relocation possibility, colony facilities information, mediclaim details, canteen facility
Round 4 - Technical 

(2 Questions)

  • Q1. Questions based on engineering drawing, g code m code knowledge,
  • Q2. Why should we hire you?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be positive throughout interview process, prepare well with all the technical knowledge related to your core domain and answer confidently.

Nuberg Engineering Interview FAQs

How many rounds are there in Nuberg Engineering Chemical Graduate Engineer Trainee interview?
Nuberg Engineering interview process usually has 1 rounds. The most common rounds in the Nuberg Engineering interview process are Technical.
What are the top questions asked in Nuberg Engineering Chemical Graduate Engineer Trainee interview?

Some of the top questions asked at the Nuberg Engineering Chemical Graduate Engineer Trainee interview -

  1. pressure increases or decreases with altitu...read more
  2. Explain Fourier La...read more
  3. Laws of thermodynami...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Nuberg Engineering interview
WalkIn
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

Tata Projects Interview Questions
4.3
 • 396 Interviews
Thermax Limited Interview Questions
4.2
 • 233 Interviews
TechnipFMC Interview Questions
4.0
 • 67 Interviews
Hilti Interview Questions
3.6
 • 58 Interviews
Mecon Interview Questions
4.0
 • 40 Interviews
Praj Industries Interview Questions
4.1
 • 35 Interviews
View all
Project Engineer
41 salaries
unlock blur

₹2.8 L/yr - ₹6 L/yr

Assistant Manager
31 salaries
unlock blur

₹5 L/yr - ₹12 L/yr

Engineer
20 salaries
unlock blur

₹3 L/yr - ₹6.1 L/yr

Project Manager
20 salaries
unlock blur

₹12 L/yr - ₹25 L/yr

Deputy Manager
19 salaries
unlock blur

₹8 L/yr - ₹16 L/yr

Explore more salaries
Compare Nuberg Engineering with

Thermax Limited

4.2
Compare

L&T Energy Hydrocarbon

3.9
Compare

Toyo Engineering

3.9
Compare

Tata Projects

4.3
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview