Upload Button Icon Add office photos

NTPC

Compare button icon Compare button icon Compare

Filter interviews by

NTPC Production Engineer Interview Questions and Answers

Updated 20 Mar 2024

NTPC Production Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
No response

I applied via Company Website and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Topics covered technical and aptitude questions

Round 2 - Technical 

(2 Questions)

  • Q1. Core technical questions
  • Q2. How does a transformer works. Detailed working and parameters to monitor
  • Ans. 

    A transformer works by transferring electrical energy between two or more circuits through electromagnetic induction.

    • Transformers consist of two coils of wire, known as the primary and secondary coils, wrapped around a core made of iron or other magnetic materials.

    • When an alternating current flows through the primary coil, it creates a changing magnetic field which induces a voltage in the secondary coil.

    • The ratio of t...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep your technical knowledge at good level. Expect some in-depth questions.

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. How we can increase efficiency of boiler ?
  • Ans. 

    Efficiency of a boiler can be increased by improving insulation, optimizing combustion, and regular maintenance.

    • Improve insulation to reduce heat loss

    • Optimize combustion by adjusting air-to-fuel ratio and using efficient burners

    • Regular maintenance to clean and repair components

    • Use economizers to recover waste heat

    • Upgrade to high-efficiency boilers

    • Implement energy management systems to monitor and control boiler operati

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Company Website

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. WIND BLADE ASSAMBLY AND LOADING TECHNICAL WORKS
  • Ans. I WAS ALLRADY RECORD IN MY COMPANY . FIRST LOADING TIME FOR 2 SETS BLADES 12 HOURS THEN MY PLAN LOADING TIME FOR 2 SETS ONLY 4 HOURES .NOW 2. 1/2 HOURES IS GOING ON.
  • Answered Anonymously
  • Q2. BEARINGS ASSAMBLY, BLADE BALANCING WORK, (BLADE KG CHEAK), SET DIVED, TEAM HANDLING , 5 S WORKS, QED WORK, REPARING WORK MAINTANANCE SERVICES WORK, SITE REPARING AND PAINT WORK , SITE TO SITE BLADE SHIFTI...
  • Q3. MY PAST COMPANY ENERCON, SUZLON, VESTAS RRB, AND MY OOLDES COMPANY IS MARDAN ENGINEERING FIBER HAND MOLDING MANUFACTURING .
  • Q4. YOU ASK ANY QUESTION

Interview Preparation Tips

Interview preparation tips for other job seekers - FIRST YOU CHECK WORK LIST (JSA), TEAM PLAN AND SAFETY PLANS AFTER TOU DO WORK
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Tell me about yourself
  • Ans. 

    Experienced production engineer with a background in mechanical engineering and a passion for optimizing manufacturing processes.

    • Graduated with a degree in Mechanical Engineering

    • Worked for 5 years in the manufacturing industry

    • Implemented lean manufacturing principles to improve production efficiency

    • Led a team in reducing production costs by 15% through process optimization

  • Answered by AI
  • Q2. What is knocking?
  • Ans. 

    Knocking is an abnormal combustion phenomenon in internal combustion engines.

    • Knocking occurs when the air-fuel mixture in the engine's cylinders ignites prematurely or unevenly.

    • It produces a knocking or pinging sound, which can cause damage to the engine if not addressed.

    • Factors contributing to knocking include low octane fuel, high engine temperatures, and incorrect ignition timing.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good

I applied via Campus Placement and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Parshonality test me behaviour and nature, spiking etc

Round 3 - Technical 

(5 Questions)

  • Q1. Field related questions
  • Q2. Cell manufacturing process
  • Q3. What is the S.O.P ?
  • Ans. 

    S.O.P stands for Standard Operating Procedure, which is a set of step-by-step instructions compiled by an organization to help workers carry out routine operations.

    • S.O.P outlines the steps that employees should take to complete a specific task or process.

    • It ensures consistency and quality in the performance of tasks.

    • S.O.Ps are used in various industries such as manufacturing, healthcare, and food service.

    • For example, i...

  • Answered by AI
  • Q4. What is the S.T.Q ?
  • Ans. 

    S.T.Q stands for Safety, Time, Quality - a framework used in production engineering to prioritize aspects of a project.

    • Safety: Ensuring that all processes and equipment are safe for workers and the environment.

    • Time: Managing the schedule and deadlines to ensure timely completion of projects.

    • Quality: Maintaining high standards of quality in the production process and final products.

    • Example: Prioritizing safety measures ...

  • Answered by AI
  • Q5. What is a batal proces
  • Ans. 

    A batal process is a term used in the oil and gas industry to describe a process where two fluids are mixed together to create a desired outcome.

    • Batal processes are commonly used in drilling operations to create drilling mud with specific properties.

    • The mixing of drilling mud involves combining water, clay, and other additives to achieve the desired viscosity and density.

    • Batal processes can also be used in hydraulic fr...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Adani Green Energy Production Engineer interview:
  • Solar cell manufacturing process
Interview preparation tips for other job seekers - Deta enalish karna production control

Skills evaluated in this interview

Interview experience
1
Bad
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed in Aug 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. What do you Wark
  • Ans. 

    Fiber line bled manufacturing

  • Answered Anonymously
  • Q2. How much bled meter
  • Ans. 

    The bled meter measures the amount of fluid that has been bled off from a system.

    • The bled meter is used to monitor the bleeding of fluid from a system.

    • It helps in determining the amount of fluid that has been removed from the system.

    • The bled meter readings are important for maintaining the proper fluid levels in the system.

  • Answered by AI
  • Q3. What do you knowlege
  • Ans. 

    I have knowledge in various aspects of production engineering including process optimization, quality control, and equipment maintenance.

    • Knowledge of manufacturing processes and techniques

    • Understanding of quality control methods and tools

    • Experience with equipment maintenance and troubleshooting

    • Familiarity with lean manufacturing principles

    • Ability to analyze production data and identify areas for improvement

  • Answered by AI
Round 2 - Technical 

(3 Questions)

  • Q1. Technical Case Study coding test other
  • Q2. Technical Case Study coding test other
  • Q3. Technical Case Study coding test other

Interview Preparation Tips

Interview preparation tips for other job seekers - Mohit Kumar kori Kashar derwa Pratapgarh,UP
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Assbly question and press
  • Q2. Scrap control manpower allegation
  • Q3. Shop floor control, material accountable

Interview Preparation Tips

Topics to prepare for Tata Power Production Engineer interview:
  • Production Engineering
  • Communication Skills
Interview preparation tips for other job seekers - Production engineer mobil assbly
And shift incharge

I was interviewed before Nov 2016.

Interview Questionnaire 

3 Questions

  • Q1. About yourself
  • Q2. Will you work at any location
  • Ans. 

    Yes, I am willing to work at any location for the Senior Engineer position.

    • I am open to relocating for the right opportunity

    • I have experience working in different locations

    • I am flexible and adaptable to new environments

  • Answered by AI
  • Q3. Why you think you can work in any adverse situation
  • Ans. 

    I have a proven track record of staying calm and focused in challenging situations, allowing me to problem-solve effectively.

    • I have experience working in high-pressure environments and have successfully delivered projects on time despite obstacles.

    • I am adaptable and can quickly assess a situation to determine the best course of action.

    • I have strong problem-solving skills and can think creatively to find solutions in ad

  • Answered by AI

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 100

Round: Group Discussion
Duration: 20 minutes

I applied via Company Website and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Tell me about yourself.
  • Q2. Notice period of my present organisation
Round 2 - Technical 

(1 Question)

  • Q1. Site based question about TG Deck Slab, Ash Handling Package

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and if you r experienced like me, you should be well prepared about practical experience.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Transformer releted protection and testing
  • Q2. Relay protection
Round 2 - HR 

(2 Questions)

  • Q1. Salary discussed
  • Q2. All releted document

NTPC Interview FAQs

How many rounds are there in NTPC Production Engineer interview?
NTPC interview process usually has 2 rounds. The most common rounds in the NTPC interview process are Technical and Aptitude Test.
What are the top questions asked in NTPC Production Engineer interview?

Some of the top questions asked at the NTPC Production Engineer interview -

  1. How does a transformer works. Detailed working and parameters to moni...read more
  2. Core technical questi...read more

Tell us how to improve this page.

NTPC Production Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more
NTPC Production Engineer Salary
based on 5 salaries
₹3.1 L/yr - ₹15 L/yr
140% more than the average Production Engineer Salary in India
View more details

NTPC Production Engineer Reviews and Ratings

based on 3 reviews

4.8/5

Rating in categories

4.6

Skill development

4.5

Work-life balance

4.1

Salary

4.5

Job security

4.6

Company culture

3.9

Promotions

4.6

Work satisfaction

Explore 3 Reviews and Ratings
Senior Manager
129 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy General Manager
102 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
101 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive
74 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
66 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare NTPC with

Power Grid Corporation of India

4.4
Compare

BHEL

4.1
Compare

Tata Power

3.9
Compare

Adani Power

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview