Filter interviews by
I applied via LinkedIn and was interviewed in Jan 2024. There was 1 interview round.
Mux stands for multiplexer, a device that selects one of several input signals and forwards it to a single output. Bus is a communication system that transfers data between components within a computer or between computers.
Mux is used to combine multiple input signals into a single output signal
Bus is a communication pathway that allows data transfer between components
Example of mux: a 2-to-1 mux takes 2 input signals ...
Design a reset counter logic for MBD Engineer interview
Use a flip-flop to store the count value
Connect the output of the flip-flop to a comparator to check for the reset condition
Implement a reset signal that resets the counter when the reset condition is met
A up counter is a digital circuit that counts upwards by one with each clock pulse.
Use flip-flops to store the count value
Connect the output of one flip-flop to the clock input of the next flip-flop
Use logic gates to control the counting sequence
Reset the counter when the maximum count is reached
Davinci Developer is a software tool used for Model-Based Design (MBD) in engineering to develop and simulate complex systems.
Davinci Developer is used for developing and simulating complex systems in various engineering fields.
It allows engineers to create models, simulate behavior, and analyze system performance.
The tool is commonly used in automotive, aerospace, and industrial automation industries.
Davinci Developer...
Top trending discussions
posted on 1 Apr 2021
posted on 9 Sep 2022
I applied via Company Website and was interviewed in Aug 2022. There were 2 interview rounds.
Related the question of basic and experience.the position of this job .
I applied via Referral and was interviewed before Oct 2022. There were 2 interview rounds.
A controller is a device that manages the flow of data between the computer and external devices, while a processor is the central processing unit that performs calculations and executes instructions.
Controller manages data flow between computer and external devices
Processor performs calculations and executes instructions
Examples: A USB controller manages data flow between a computer and a USB device, while a CPU is a
Requirement elicitation is the process of gathering, analyzing, and defining the needs and constraints of a system.
Identify stakeholders and involve them in the process
Use various techniques such as interviews, surveys, observations, and workshops
Document requirements clearly and prioritize them based on importance
Validate requirements with stakeholders to ensure accuracy
ASIL levels are used in automotive functional safety to classify the risk associated with potential hazards.
ASIL stands for Automotive Safety Integrity Level
There are four ASIL levels - A, B, C, and D
ASIL D represents the highest level of risk and requires the most stringent safety measures
ASIL levels are determined based on the severity of potential hazards and the probability of exposure
I was interviewed before May 2016.
posted on 29 Jul 2021
I applied via Campus Placement and was interviewed before Jul 2020. There were 4 interview rounds.
posted on 19 Jan 2021
I was interviewed in Jul 2020.
I have achieved several milestones throughout my career as a Senior Engineer.
Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.
Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.
Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...
posted on 1 Jun 2020
I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.
Die casting and machining defects are common in manufacturing processes.
Die casting defects include porosity, shrinkage, cold shuts, and flash.
Machining defects include burrs, chatter marks, and tool marks.
Die casting defects can be caused by improper temperature, pressure, or metal flow.
Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.
Defects can lead to part failure, reduced
Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.
Filling and high speed ratio formula is V/Q
V is the volume of the container and Q is the flow rate of the liquid
The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate
The higher the flow rate, the faster the c
posted on 23 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
I have a valid driver's license for both cars and motorcycles.
I have a Class C license for cars
I also have a Class M license for motorcycles
I have a clean driving record with no accidents or violations
I ride a road bike for commuting and a mountain bike for leisure.
I prefer road bikes for their speed and efficiency on paved roads.
I enjoy mountain biking for the challenge and adventure of off-road trails.
I also have experience with hybrid bikes for their versatility.
I prioritize safety and always wear a helmet and follow traffic laws.
I have participated in charity rides and group rides for fun and community.
Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.
Testing can include physical tests such as crash tests, durability tests, and performance tests.
Simulation and modeling can also be used to test vehicle components and systems.
Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European
We conduct various types of homologation testing depending on the product and its intended market.
We conduct safety testing to ensure compliance with local regulations.
We perform emissions testing to ensure compliance with environmental regulations.
We conduct performance testing to ensure the product meets the required standards.
We also conduct durability testing to ensure the product can withstand the expected wear an...
based on 1 interview
Interview experience
Senior Software Engineer
138
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
98
salaries
| ₹0 L/yr - ₹0 L/yr |
Software Engineer
76
salaries
| ₹0 L/yr - ₹0 L/yr |
Diploma Trainee Engineer
65
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
54
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Samvardhana Motherson Group
Sundaram Clayton
Rane Group