Add office photos
Filter interviews by
Nawah Energy Company Mechanical Technician Interview Questions and Answers
Nawah Energy Company Mechanical Technician Interview Experiences
1 interview found
Anonymous
I applied via Company Website and was interviewed before Nov 2020. There were 6 interview rounds.
Interview Questionnaire
3 Questions
- Q1. What are the clearance and volume of the compressor and how to measure it?
- Ans.
The clearance and volume of a compressor can be measured using various methods.
Clearance refers to the space between the piston and cylinder head when the piston is at top dead center.
Volume refers to the amount of air or gas that the compressor can displace in a single stroke.
Clearance can be measured by using a feeler gauge to determine the gap between the piston and cylinder head.
Volume can be measured by calculatin...
- Q2. What is the step up and step down in gearboxes? and how to increase and reduce speed as a requirement?
- Ans.
Step up and step down in gearboxes refer to increasing and decreasing speed respectively. This can be achieved through gear ratios.
Step up refers to increasing speed while step down refers to decreasing speed
This is achieved through gear ratios which determine the speed of the output shaft relative to the input shaft
To increase speed, a smaller gear is used on the input shaft and a larger gear on the output shaft
To dec...
- Q3. What is the velocity of the turbine? How to check it?
- Ans.
The velocity of the turbine can be measured using a tachometer or by calculating it using the formula V = πDN/60.
Use a tachometer to measure the velocity of the turbine.
Calculate the velocity using the formula V = πDN/60, where D is the diameter of the turbine and N is the rotational speed in revolutions per minute (RPM).
Ensure that the units of measurement are consistent when using the formula.
Compare the measured or ...
Interview Preparation Tips
I would like to suggest to you all that before the interview, you have to consider as per your role and responsibilities, expertise, skill, knowledge, understanding all fundamental related roles, and be strong during the interview with the client.
Do not be loose yourself.
Thank you.
Top trending discussions
Interview questions from similar companies
Selected
I applied via campus placement at Dr Ram Manohar Lohia Avadh University, Faizabad and was interviewed before Sep 2023. There was 1 interview round.
(2 Questions)
- Q1. S.t.p.plant and e.t.p.plant.
- Q2. Banking questions
Interview Preparation Tips
I applied via Approached by company and was interviewed in Dec 2021. There were 3 interview rounds.
(4 Questions)
- Q1. My Location in kanpur
- Q2. Please kanpur in my job
- Q3. And any Location please reply to me
- Q4. Please tell me your Location in kanpur My Location in kanp
(3 Questions)
- Q1. My name is Punit ramesh rajbhar ITI kiya hai.mechineal technician
- Q2. Please reply to me.i need job please reply to me
- Q3. Please reply to me my Location in kanpur nagar
(3 Questions)
- Q1. Please reply to me my name is Punit ramesh rajbhar my Location in kanpur
- Q2. Please reply to me my name is Punit ramesh rajbhar my Location in kanpur nagar
- Q3. My name is Punit ramesh rajbhar my Location in kanpur nagar
Interview Preparation Tips
I applied via Company Website and was interviewed before Mar 2023. There was 1 interview round.
(1 Question)
- Q1. CNC and automation assy
Interview Preparation Tips
Selected
I applied via Referral and was interviewed in Nov 2024. There were 3 interview rounds.
It's better to talk with me is good
It's use of contribute that way off the share details
(5 Questions)
- Q1. What is Accenture
- Ans.
Accenture is a global professional services company providing strategy, consulting, digital, technology, and operations services.
Global professional services company
Offers strategy, consulting, digital, technology, and operations services
Works with clients across various industries
- Q2. What is AutoCAD
- Ans.
AutoCAD is a computer-aided design software used by engineers and architects to create 2D and 3D drawings and models.
AutoCAD is widely used in various industries such as architecture, engineering, and construction.
It allows users to create precise drawings and models with tools like lines, circles, and arcs.
Users can also add dimensions, annotations, and text to their designs.
AutoCAD supports both 2D and 3D design capa...
- Q3. What is contributing
- Ans.
Contributing factors in mechanical engineering involve various elements that impact the design, development, and operation of mechanical systems.
Materials used in construction
Environmental conditions
Budget constraints
Regulatory requirements
Technological advancements
Safety considerations
- Q4. What is ambition
- Ans.
Ambition is a strong desire to achieve something, often accompanied by determination and hard work.
Ambition is the driving force behind setting and achieving goals.
It involves a strong desire to succeed and willingness to put in the necessary effort.
Ambition can lead to personal growth, career advancement, and overall success.
Examples include striving for a promotion at work, starting a business, or pursuing higher edu...
- Q5. What is CATIA example briefly
- Ans.
CATIA is a CAD software used for designing and engineering in various industries.
CATIA is a powerful 3D modeling software used in industries like automotive, aerospace, and manufacturing.
It allows engineers to design, simulate, and analyze products before they are physically created.
CATIA can be used for creating complex surfaces, assemblies, and detailed drawings.
It is commonly used for designing cars, airplanes, and ...
Interview Preparation Tips
- AutoCAD
- Solid edge
- CATIA
Selected
I applied via Job Portal
(3 Questions)
- Q1. Describe your most recent Projects.
- Ans.
Designed and implemented a new cooling system for a manufacturing plant.
Researched different cooling technologies and their efficiency
Collaborated with a team of engineers to design the system layout
Performed simulations to optimize the cooling system performance
Managed the installation and testing of the new system
- Q2. Explain Design Methodology
- Ans.
Design methodology is a systematic approach to solving engineering problems by following a series of steps.
Design methodology involves defining the problem, researching, brainstorming solutions, selecting the best solution, prototyping, testing, and refining.
It helps ensure that the final product meets the desired requirements and functions effectively.
Examples of design methodologies include Six Sigma, Lean Manufactur
- Q3. Explain 3,2,1 principle of GD &t
- Ans.
The 3,2,1 principle of GD&T is a method used to establish a datum reference frame for geometric dimensioning and tolerancing.
3 points are used to establish a datum plane, 2 points to establish a datum line, and 1 point to establish a datum point.
The 3,2,1 principle ensures that the part is securely located and oriented in a consistent manner for measurement and manufacturing processes.
Datum features are used as referen...
Displacement velocity and acceleration diagram when the followers moves with simple harmonic motion
(2 Questions)
- Q1. What is surface
- Ans.
Surface refers to the outermost layer or boundary of an object or material.
Surface is the area that is exposed to the surrounding environment.
It can be smooth, rough, porous, reflective, or absorbent.
Examples include the surface of a table, the skin's surface, or the surface of a lake.
- Q2. What is hardness
- Ans.
Hardness is a measure of a material's resistance to deformation, scratching, or abrasion.
Hardness is a physical property of materials.
It is typically measured using tests like the Mohs scale for minerals or the Rockwell scale for metals.
Materials with higher hardness values are more resistant to wear and scratching.
Hardness can be influenced by factors such as composition, microstructure, and processing.
Examples of har...
I applied via Company Website and was interviewed in Nov 2022. There was 1 interview round.
(2 Questions)
- Q1. You work before in any company
- Q2. You have experience in any job
Interview Preparation Tips
Selected
I applied via campus placement at Kumaraguru College of Technology, Coimbatore and was interviewed before Nov 2023. There were 2 interview rounds.
Engineering core sub
(2 Questions)
- Q1. Stress and strain curve
- Q2. Material knowledge
Interview Preparation Tips
- Design Engineering
I applied via Company Website and was interviewed in Aug 2022. There were 2 interview rounds.
Coding and decoding, blood relation, data interpretation
(1 Question)
- Q1. Python, jova ,c++,cloud
Interview Preparation Tips
Nawah Energy Company Interview FAQs
Some of the top questions asked at the Nawah Energy Company Mechanical Technician interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- Mechanical Engineer Interview Questions
- Diploma Mechanical Engineer Interview Questions
- Mechanical Maintenance Engineer Interview Questions
- Senior Engineer Mechanical Interview Questions
- Mechanical Fitter Interview Questions
- Mechanical Maintenance Fitter Interview Questions
- Mechanical Supervisor Interview Questions
- Mechanical Foreman Interview Questions
- Show more
Interview Questions from Similar Companies
Nuclear Power Corporation of India
BHEL
Tata Power
Adani Power
- Home >
- Interviews >
- Nawah Energy Company Interview Questions >
- Nawah Energy Company Mechanical Technician Interview Questions
