Add office photos
Filter interviews by
Napino Continental Vehicle Electronics Interview Questions and Answers
Napino Continental Vehicle Electronics Interview Experiences
2 interviews found
Selected
I applied via Naukri.com
(7 Questions)
- Q1. Preventive maintenance and correct maintenance
- Q2. Tall about your company line process.
- Q3. What is your strong area and tell about.
- Ans.
My strong area is preventive maintenance planning and execution.
Developing comprehensive maintenance schedules
Implementing preventive maintenance programs
Troubleshooting equipment issues efficiently
Training team members on maintenance best practices
- Q4. Have you experience on Speedo meter
- Ans.
Yes, I have experience working with Speedo meters in previous maintenance roles.
I have experience troubleshooting and repairing Speedo meters in various vehicles.
I am familiar with calibrating Speedo meters to ensure accurate readings.
I have worked with different types of Speedo meters, including digital and analog versions.
- Q5. Have you experience on vision machine and CAN based machine.
- Ans.
Yes, I have experience with vision machines and CAN based machines.
I have worked with vision machines to inspect and analyze products for defects.
I have experience with CAN based machines for communication and control in industrial settings.
I have troubleshooted and maintained vision and CAN based machines to ensure optimal performance.
- Q6. Have you experience on gluing machine.
- Ans.
Yes, I have extensive experience working with gluing machines in various manufacturing settings.
I have operated and maintained gluing machines for over 5 years.
I am familiar with different types of gluing machines, such as hot melt, cold glue, and pressure-sensitive adhesive machines.
I have experience troubleshooting and repairing issues with gluing machines to ensure smooth production processes.
I have trained new empl...
- Q7. What type problem comes in vision machine and gluing machine.
- Ans.
Common problems in vision machine and gluing machine include calibration issues, software malfunctions, and mechanical failures.
Calibration issues can lead to inaccurate measurements or placements
Software malfunctions may cause the machine to not function properly
Mechanical failures such as jammed parts or broken components can halt production
Dust or debris buildup can affect the accuracy of the vision system
Improper m...
(1 Question)
- Q1. Privious company salery and Roll
Interview Preparation Tips
Skills evaluated in this interview
I applied via Approached by Company and was interviewed before May 2022. There were 4 interview rounds.
(1 Question)
- Q1. Core technical skill of your current department - HOD
(1 Question)
- Q1. Core technical skill of your current department - Vice President
(1 Question)
- Q1. Salary negotiation with all document proof
Interview Preparation Tips
Assistant Manager Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
Embedded Firmware Engineer Interview Questions & Answers
Efftronics Systems
Anonymous
posted on 15 Dec 2024
I applied via campus placement at Gandhi Institute of Technology and Management, Visakhapatnam and was interviewed in Nov 2024. There were 6 interview rounds.
There are 65 questions related to ECE core topics, including Network Analysis, some on VLSI, Signals and Systems, Analog Circuits, Electronic Devices, and Amplifier Circuits. Additionally, there are 118 simple questions covering mind games, object identification, and series completion.
(3 Questions)
- Q1. What is life according to you ?
- Ans.
Life is a journey filled with experiences, challenges, growth, and opportunities for self-discovery.
Life is a precious gift that should be cherished and lived to the fullest
It involves constant learning, adapting, and evolving as individuals
Life is about forming meaningful relationships and connections with others
It includes pursuing passions, setting goals, and overcoming obstacles
Life is a balance of joy and sorrow,
- Q2. Does education help you to earn money ?
- Ans.
Education can help individuals earn money by providing them with valuable skills, knowledge, and opportunities for career advancement.
Education can lead to higher paying job opportunities
Specialized education or training can result in higher salaries
Education can also lead to promotions and career advancement
Higher levels of education are often correlated with higher earning potential
- Q3. Do you need education and fame ?
(3 Questions)
- Q1. Convert hexadecimal to decimal ?
- Ans.
Hexadecimal to decimal conversion involves multiplying each digit by 16 raised to the power of its position.
Start from the rightmost digit and multiply each digit by 16 raised to the power of its position (0-indexed).
Add the results of each multiplication to get the decimal equivalent.
For example, converting 0x1A to decimal: (1 * 16^1) + (10 * 16^0) = 26.
- Q2. Design the components which are involved in the internal logic circuit of a 7-segment display based on the provided circuit ?
- Ans.
Components involved in the internal logic circuit of a 7-segment display include decoder, driver, and individual LED segments.
Decoder: Converts input signals into the appropriate output signals for each segment.
Driver: Amplifies the output signals from the decoder to drive the LED segments.
Individual LED segments: Represent each of the seven segments in the display.
Example: BCD to 7-segment decoder, transistor driver c
- Q3. Design specifications for creating a vending machine using a microcontroller, incorporating the display of amounts with two 7-segment displays and including four to five additional operational conditions?
- Ans.
Design a vending machine using a microcontroller with two 7-segment displays and additional operational conditions.
Use a microcontroller to control the vending machine's operations
Incorporate two 7-segment displays to show the amounts
Include four to five additional operational conditions such as low inventory alert, coin validation, product selection, etc.
(2 Questions)
- Q1. Write an assembly language program for displaying a square waves for the frequency of 1 Hz and 2 Hz with the 2 ports .
- Ans.
Assembly language program to display square waves for 1 Hz and 2 Hz using 2 ports.
Use assembly language instructions to control the ports for outputting square waves.
Set up a loop to toggle the ports at the desired frequencies to generate the square waves.
Ensure proper timing and synchronization between the two square waves.
- Q2. Write an assembly language program for reversing a byte for a hexadecimal value ? ex: A3 hexadecimal needs to converted to C5 when reversed .
- Ans.
Assembly language program to reverse a byte for a hexadecimal value.
Load the hexadecimal value into a register
Extract the lower 4 bits and upper 4 bits of the byte
Swap the lower and upper 4 bits
Combine the swapped bits to get the reversed byte
(2 Questions)
- Q1. When 2 trains move in opposite directions , what point will they meet at different speeds? And related questions
- Ans.
The trains will meet at a point that is determined by the relative speeds of the trains.
The point where the trains meet is determined by the sum of the distances traveled by each train.
The time taken for the trains to meet is determined by the relative speeds of the trains.
If Train A is traveling at 50 mph and Train B is traveling at 70 mph, they will meet at a point that is closer to Train B's starting point.
- Q2. Matrices , volume , Coins , probability
(2 Questions)
- Q1. They will be asking mostly what ever you have written in the 2-5 rounds which will be conducted in the company premises .
- Q2. Flip flops, diff of micro-controller and microprocessor, logic gates , I2C , USART , SPI
Interview Preparation Tips
- Digital Logic Design
- Analog Circuits
- Assembly Language
- Electronic Circuit Design
Interview will be held in the company premises. After going to the company you will be seated in a single chair and you will be given the question papers for each round and then the last HR round is final.
Prepare well for all the rounds; it is essential to be mentally and physically strong because you will need to be present from 8:30 AM to 6:30 PM.
Talent Acquisition Specialist Interview Questions & Answers
GoMechanic
Ravinder kaur
posted on 2 Jan 2025
I applied via Shine and was interviewed in Dec 2024. There was 1 interview round.
(1 Question)
- Q1. It was a basic interview round
Interview Preparation Tips
2. Long waiting time on Interview day with only few candidates - on the day of interview, candidates made to wait approximately 2-3 hours before the interview conducted. The delay not only caused inconvenience but also reflected poor time management.
3. No communication post Interview - After the interview, there was no communication from the concerned person on interview results. Despite following up via calls and msgs to check for feedback, there was no response from the company.
Overall Experience -
The entire process lacked professionalism from no formal invitation to no communication on feedback or interview results. If the candidate is not selected then too, its a responsibility to keep candidate informed well. Clear and timely communication is crucial for candidate experience and employer branding which is highly missing here.
I applied via Approached by Company and was interviewed in Dec 2024. There were 2 interview rounds.
(2 Questions)
- Q1. It was general snowflake related
- Q2. Deep dive into architecture of snowflake
(1 Question)
- Q1. Coding based round with onsite team members
Interview Preparation Tips
Selected
(2 Questions)
- Q1. I really like Cashify because it solves people's problems
- Q2. Hu euhwheheb jsjueheb Hehhe
मुझे एजे हुई इउहे हंस एजे एजे वह e वो यह यूएसबी शासन।
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Jun 2024. There were 2 interview rounds.
(2 Questions)
- Q1. Basic Questions asked related to Qualification and previous working experience.
- Q2. Excel Test was conducted by HR via Zoom app (Topics were asked - Count , count if, sum, sum if, Vlook up, Concatenate, Conditional Formatting, Data Validation, Pivot table, difference between largest and s...
(6 Questions)
- Q1. Self Introduction and Previous Working description conducted by Admin cum Head of logistics department, senior executive. They also asked definition of MS Word, MS Excel, MS powerpoint, difference between ...
- Q2. Questions related to Material master that is procurement, order processing, Invoicing, dispatching, and Eway billing in SAP. How and when its required?
- Q3. Personality Test that is How do you know about our Industry, Background,
- Q4. Why should we hire you? What do you know about logistic department? How To Maintain Warehouse properly so that we can easily process the order as per customer requirement? How logistic department works? Wa...
- Q5. How would you deal with critical situation?
- Q6. Are you really willing to work with us? (they will tell that you may face problem will you compromise your mood? actually they are examining that whether you're really interested to work with them or not a...
Interview Preparation Tips
- SAP
- Advanced Excel
- MS Powerpoint
- MS Word
- Keyboard Shortcuts
Production Operator Interview Questions & Answers
Hero Motors Company
Anonymous
posted on 23 Oct 2024
Selected
I applied via Company Website and was interviewed in Sep 2024. There was 1 interview round.
(7 Questions)
- Q1. What is emf? volt and watt different
- Ans.
EMF stands for electromotive force, which is the voltage generated by a source such as a battery. Volt is the unit of measurement for voltage, while watt is the unit of measurement for power.
EMF is the voltage generated by a source of electrical energy, such as a battery
Volt is the unit of measurement for voltage, representing the potential difference between two points in a circuit
Watt is the unit of measurement for p...
- Q2. What difference hidrulic and hidrulic Machine?
- Ans.
Hydraulic machines use fluid power to perform work, while hydraulic machines are machines that utilize hydraulic power.
Hydraulic machines use fluid power to generate force and motion, such as hydraulic presses and hydraulic cylinders.
Hydraulic machines are machines that utilize hydraulic power, such as excavators and forklifts.
Hydraulic machines are often used in heavy-duty industrial applications, while hydraulic mach...
- Q3. What is definition of machine
- Ans.
A machine is a device that uses energy to perform a specific task or function.
A machine is typically made up of various components that work together to achieve a desired outcome
Machines can range from simple tools like a hammer to complex systems like a computer
Examples of machines include cars, washing machines, and robots
- Q4. How work 2 stroke or 4 stroke ingine ?
- Ans.
2 stroke engines have a power cycle with two strokes (up and down) of the piston in one revolution, while 4 stroke engines have four strokes (intake, compression, power, exhaust) in two revolutions.
2 stroke engines have a simpler design with fewer moving parts compared to 4 stroke engines
2 stroke engines require a mixture of oil and fuel for lubrication, while 4 stroke engines have a separate oil reservoir for lubricat...
- Q5. Columa law? difine and rincople
- Q6. principle of least count ?
- Ans.
The principle of least count is the smallest measurement that can be made by a measuring instrument.
It is the smallest increment that can be measured by the instrument.
It is determined by the precision of the instrument.
For example, a ruler with markings at every millimeter has a least count of 1 mm.
In a digital caliper with a resolution of 0.01 mm, the least count is 0.01 mm.
- Q7. vernier caliper and vernier scale define?
- Ans.
Vernier caliper is a measuring tool used to take precise measurements, with a vernier scale providing additional accuracy.
Vernier caliper is a tool used for measuring dimensions accurately.
It consists of a main scale and a vernier scale for more precise readings.
The vernier scale allows for measurements to be taken to a higher degree of accuracy than just the main scale alone.
Commonly used in engineering, manufacturing...
Skills evaluated in this interview
Selected
(3 Questions)
- Q1. What is tolerence
- Q2. Types of Tolerance
- Q3. How many types of casting are there
afnan af
Selected
I applied via Naukri.com and was interviewed in Nov 2024. There were 3 interview rounds.
(1 Question)
- Q1. Could you provide more details about your previous experience?
- Ans.
I have over 5 years of experience in sales, including managing key accounts and exceeding sales targets.
Managed key accounts to ensure customer satisfaction and retention
Consistently exceeded sales targets by implementing effective sales strategies
Developed and maintained strong relationships with clients to drive business growth
(1 Question)
- Q1. Could you describe your academic background and its relevance to the role?
- Ans.
I have a Bachelor's degree in Business Administration with a focus on sales and marketing, which has provided me with a strong foundation for this role.
Bachelor's degree in Business Administration with a focus on sales and marketing
Courses in sales strategies, consumer behavior, and market analysis
Internship experience in a sales role at XYZ Company
Capstone project on developing a sales plan for a new product
(1 Question)
- Q1. How many years do you anticipate staying with the company if selected?
- Ans.
I anticipate staying with the company long-term, as I am looking for stability and growth opportunities.
I am committed to contributing to the company's success and advancing my career within the organization.
I value stability and long-term relationships with employers.
I am excited about the potential growth opportunities within the company and see myself growing along with it.
Napino Continental Vehicle Electronics Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
Napino Continental Vehicle Electronics Interview Process
based on 2 interviews
Interview experience
Interview Questions from Similar Companies
Napino Continental Vehicle Electronics Reviews and Ratings
based on 50 reviews
Rating in categories
|
Assistant Engineer
32
salaries
|  ₹1.8 L/yr - ₹4 L/yr |
|
Assistant Manager
17
salaries
| ₹7.2 L/yr - ₹16 L/yr |
|
Deputy Manager
16
salaries
| ₹12 L/yr - ₹18.7 L/yr |
|
Diploma Trainee Engineer
13
salaries
| ₹1.5 L/yr - ₹2.5 L/yr |
|
Senior Engineer
10
salaries
| ₹5.1 L/yr - ₹9.1 L/yr |
Spark Minda
Varroc Group
Bharat Forge
Rane Holdings
- Home >
- Interviews >
- Napino Continental Vehicle Electronics Interview Questions
