Filter interviews by
I applied via Recruitment Consultant and was interviewed before May 2020. There were 3 interview rounds.
Top trending discussions
I applied via Naukri.com and was interviewed before Nov 2021. There were 3 interview rounds.
I applied via Campus Placement and was interviewed before Oct 2020. There was 1 interview round.
I applied via Recruitment Consultant and was interviewed before Jan 2021. There was 1 interview round.
There are 5 levels in PPAP (Production Part Approval Process).
PPAP has 5 levels: Level 1, Level 2, Level 3, Level 4, and Level 5.
Each level represents a different stage of the PPAP process.
Level 1 includes documentation submission, while Level 5 involves customer approval.
The higher the level, the more comprehensive the PPAP requirements become.
PPAP is used to ensure that suppliers meet the quality standards of their c
Cp measures the capability of a process to meet specifications, while Cpk measures the capability of a process to meet specifications considering centering.
Cp is a short-term capability index, while Cpk is a long-term capability index.
Cp considers only the spread of the process, while Cpk considers both the spread and the centering of the process.
Cp is calculated using the formula Cp = (USL - LSL) / (6 * standard devia...
CAPA stands for Corrective and Preventive Action. It is a systematic approach to identify, investigate, and resolve quality issues.
CAPA is a key component of quality management systems.
It involves identifying the root cause of a problem, implementing corrective actions to address the immediate issue, and preventive actions to prevent recurrence.
CAPA processes typically include steps like problem identification, investi...
I appeared for an interview before Apr 2021.
Toe in and toe out are terms used to describe the angle of the wheels on a vehicle.
Toe in refers to the front of the wheels being closer together than the back of the wheels.
Toe out refers to the front of the wheels being further apart than the back of the wheels.
Toe in/out can affect the handling and tire wear of a vehicle.
Proper alignment is important for safety and optimal performance.
Wheel balancing is the process of equalizing the weight of a tire and wheel assembly so that it spins smoothly at high speeds.
It involves adding or removing weights to the wheel to balance it
Unbalanced wheels can cause vibrations, uneven tire wear, and steering issues
It is important to balance wheels regularly, especially after getting new tires or wheels
Examples of wheel balancing equipment include wheel balancers and
Caster camber angle is the angle between the vertical axis of the wheel and the steering axis.
It affects the stability and handling of the vehicle.
Caster angle helps in straight-line stability and steering returnability.
Camber angle helps in tire wear and cornering ability.
Welding defects are imperfections that occur during the welding process.
Common welding defects include porosity, undercutting, and incomplete fusion.
Porosity is caused by gas pockets trapped in the weld, while undercutting is a groove at the base of the weld.
Incomplete fusion occurs when the weld metal does not fuse completely with the base metal.
Welding defects can weaken the weld and compromise its integrity.
Quality ...
Vernier caliper least count is the smallest measurement that can be read on the scale of the caliper.
The least count of a Vernier caliper is usually 0.02 mm or 0.05 mm.
It is determined by dividing the smallest division on the main scale by the number of divisions on the Vernier scale.
For example, if the smallest division on the main scale is 1 mm and there are 20 divisions on the Vernier scale, the least count would be
The type of welding used depends on the material being welded and the desired strength of the joint.
Common types of welding include MIG, TIG, stick, and flux-cored welding.
MIG welding is often used for welding aluminum and steel.
TIG welding is commonly used for welding thin materials and for precision welding.
Stick welding is often used for welding thicker materials and in outdoor environments.
Flux-cored welding is sim...
What your view on alcohol and alcohol bane or not and why
posted on 9 Jan 2024
I applied via Naukri.com and was interviewed in Jul 2023. There was 1 interview round.
The least count of a measuring instrument is the smallest value that can be measured by the instrument.
The least count is determined by the smallest division on the scale or the smallest increment the instrument can detect.
It is important to consider the least count when using a measuring instrument to ensure accurate measurements.
For example, a ruler with a least count of 1 mm can measure lengths to the nearest millim...
A quality engineer can understand various types of views from drawings.
Orthographic views: Front, top, and side views of an object.
Isometric views: A 3D representation of an object.
Section views: Show internal details of an object by cutting it.
Detail views: Enlarged views of specific areas of an object.
Auxiliary views: Show the true shape and size of inclined surfaces.
Exploded views: Illustrate the assembly of compone...
based on 5 reviews
Rating in categories
Assistant Engineer
856
salaries
| ₹1.1 L/yr - ₹5.1 L/yr |
Engineer
649
salaries
| ₹1.8 L/yr - ₹7 L/yr |
Assistant Manager
575
salaries
| ₹4 L/yr - ₹13.8 L/yr |
Senior Engineer
491
salaries
| ₹2.8 L/yr - ₹9.5 L/yr |
Production Engineer
490
salaries
| ₹1.2 L/yr - ₹6 L/yr |
Bosch
JBM Group
MRF Tyres
Ceat Tyres