AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Clear (1)
Motherson Automotive Technologies and Engineering Senior Engineer Paint Shop Interview Questions, Process, and Tips
Motherson Automotive Technologies and Engineering Senior Engineer Paint Shop Interview Experiences
1 interview found
(4 Questions)
- Q1. What are the Paint process?
- Ans.
Paint process involves surface preparation, priming, painting, and curing to achieve a durable and aesthetically pleasing finish.
Surface preparation: Cleaning, sanding, and masking the surface to ensure proper adhesion of the paint.
Priming: Applying a primer to improve paint adhesion and corrosion resistance.
Painting: Applying the desired paint color using techniques like spraying, brushing, or dipping.
Curing: Allowing...
- Q2. What type of paint using?
- Ans.
We use high-quality automotive paint specifically designed for durability and a flawless finish.
High-quality automotive paint is used for long-lasting results
The paint is designed to withstand environmental factors and provide a flawless finish
Examples of paint brands commonly used include PPG, Axalta, and Sherwin-Williams
- Q3. What is ppm? How to calculated ppm?
- Ans.
PPM stands for parts per million, a unit of measurement used to represent very small concentrations of substances.
PPM is calculated by dividing the mass of the solute by the total mass of the solution and then multiplying by 1,000,000.
For example, if a solution contains 2 grams of solute in 1000 grams of solution, the PPM would be 2000.
PPM is commonly used in various industries to measure the concentration of pollutant
- Q4. What is PPAP? What are they? Explain?
- Ans.
PPAP stands for Production Part Approval Process. It is a standardized process in the automotive industry to ensure suppliers meet quality standards before production.
PPAP is a set of documents and procedures used to ensure that a supplier's parts meet the customer's requirements.
It includes documentation such as design records, engineering change documents, process flow diagrams, control plans, etc.
PPAP is typically r...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
I applied via Recruitment Consultant and was interviewed before Dec 2020. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. What was the defect u faced in plastic commodity
- Ans.
I faced a defect in plastic commodity related to poor quality control during the manufacturing process.
The defect was in the form of cracks and breakages in the plastic products.
It was caused by inadequate monitoring and supervision during the molding and cooling stages.
The defect resulted in a high number of rejected products and customer complaints.
To address the issue, we implemented stricter quality control measure...
- Q2. Silver mark
Interview Preparation Tips
I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Previous company job profile.
- Q2. Plc related questions
- Q3. Family background
I applied via Referral and was interviewed in Aug 2018. There were 2 interview rounds.
Interview Preparation Tips
Experience: By skill specialist & interview call;regarding knowledge of domain.
General Tips: Krishna maruti group is very excellent place of working.big group..many plants..zero tension of job security..means a viable place to do long service.no late sitting..
Culture is greater govt.than central govt offices.
Negative is higher mismatch between ctc & in hand.
10% of basic they deduct for superannuation fund from AM level..which is unaccountable.
Avg..1000rs deduction for lunch mandatory for bad canteen good & uniform deduction.
I means to say ,anybody should discuss only in hand salary during interview.means a monthly ctc of 60k became 45k & avg 4.5k will never receive(lunch/uniform/s.a.)
Duration: <1 week
Senior Engineer Interview Questions & Answers
Endurance Technologies
Anonymous
posted on 23 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.
Interview Questionnaire
5 Questions
- Q1. Which vehicle license you have?
- Ans.
I have a valid driver's license for both cars and motorcycles.
I have a Class C license for cars
I also have a Class M license for motorcycles
I have a clean driving record with no accidents or violations
- Q2. What is CBS & ABS
- Q3. Which segment of bike you ride
- Ans.
I ride a road bike for commuting and a mountain bike for leisure.
I prefer road bikes for their speed and efficiency on paved roads.
I enjoy mountain biking for the challenge and adventure of off-road trails.
I also have experience with hybrid bikes for their versatility.
I prioritize safety and always wear a helmet and follow traffic laws.
I have participated in charity rides and group rides for fun and community.
- Q4. How you do the vehicle testing
- Ans.
Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.
Testing can include physical tests such as crash tests, durability tests, and performance tests.
Simulation and modeling can also be used to test vehicle components and systems.
Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European
- Q5. Which type of Homologation testing you do?
- Ans.
We conduct various types of homologation testing depending on the product and its intended market.
We conduct safety testing to ensure compliance with local regulations.
We perform emissions testing to ensure compliance with environmental regulations.
We conduct performance testing to ensure the product meets the required standards.
We also conduct durability testing to ensure the product can withstand the expected wear an...
Interview Preparation Tips
I applied via Walk-in and was interviewed in May 2022. There were 4 interview rounds.
(3 Questions)
- Q1. Production related questions
- Q2. Working flow rated questions
- Q3. Any other factory related
(1 Question)
- Q1. Salary related questions
Interview Preparation Tips
I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Technical questions regarding GDC process, rejection control and analysis..
- Q2. Hypothetical questions, besed on situation handling, manpower handling and decision making
Interview Preparation Tips
I applied via Walk-in and was interviewed before Dec 2021. There were 3 interview rounds.
(2 Questions)
- Q1. Write and explain GD&T symbols?
- Ans.
GD&T symbols are used to specify the geometric requirements of a part or assembly.
GD&T stands for Geometric Dimensioning and Tolerancing
Symbols include: flatness, circularity, perpendicularity, concentricity, position, and more
Each symbol has a specific meaning and is used to communicate precise engineering requirements
GD&T is used in industries such as aerospace, automotive, and manufacturing
Example: A position symbol...
- Q2. Explain Cp, Cpk & Pp, Ppk?
- Ans.
Cp, Cpk, Pp, and Ppk are statistical process control indices used to measure process capability and performance.
Cp and Cpk measure how well a process meets its specifications, with Cpk being more accurate for non-centered processes.
Pp and Ppk measure how well a process performs relative to its natural variation, with Ppk being more accurate for non-centered processes.
All four indices are calculated using the process me...
(1 Question)
- Q1. Related to GD&T, CNC programming knowledge, SPC, Fixture design and development, Tool design and development.
Interview Preparation Tips
Assistant Manager Interview Questions & Answers
Sundaram Clayton
Ponmuthukumar
posted on 21 Aug 2023
(3 Questions)
- Q1. Basic principles
- Q2. Work experience and handles the document
- Ans.
I have 5 years of work experience in managing documents and ensuring accuracy and organization.
Managed document filing system to ensure easy access and organization
Reviewed and edited documents for accuracy and completeness
Trained team members on document handling procedures
Implemented digital document management system for efficiency
Collaborated with other departments to streamline document processes
- Q3. Analyse the failure mode data
- Ans.
Analyzing failure mode data involves identifying patterns and trends to improve processes and prevent future failures.
Identify common failure modes and their frequency
Look for any trends or patterns in the data
Determine root causes of failures
Develop strategies to address and prevent future failures
Interview Preparation Tips
Casting should be thorough
Aluminium die Casting
Interview Preparation Tips
Motherson Automotive Technologies and Engineering Interview FAQs
Recently Viewed
INTERVIEWS
Motherson Automotive Technologies and Engineering
No Interviews
CAMPUS PLACEMENT
Thanthai Roever Institute of Pharmaceutical Sciences, Perambalur
INTERVIEWS
Southern Petrochemical Industries Corporation
No Interviews
INTERVIEWS
Motherson Automotive Technologies and Engineering
No Interviews
INTERVIEWS
Motherson Automotive Technologies and Engineering
No Interviews
INTERVIEWS
Southern Petrochemical Industries Corporation
No Interviews
CAMPUS PLACEMENT
Murshidabad College of Engineering and Technology, Murshidabad
INTERVIEWS
Southern Petrochemical Industries Corporation
No Interviews
INTERVIEWS
Southern Petrochemical Industries Corporation
No Interviews
INTERVIEWS
Motherson Automotive Technologies and Engineering
No Interviews
Tell us how to improve this page.
Motherson Automotive Technologies and Engineering Interviews By Designations
- Motherson Automotive Technologies and Engineering Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Design Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Senior Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Quality Inspector Interview Questions
- Motherson Automotive Technologies and Engineering Quality Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Graduate Engineer Trainee (Get) Interview Questions
- Motherson Automotive Technologies and Engineering Production Engineer Interview Questions
- Motherson Automotive Technologies and Engineering Trainee Technician Interview Questions
- Show more
Interview Questions for Popular Designations
- Paint Shop Engineer Interview Questions
- Manager - Paint Shop Interview Questions
- Painting Supervisor Interview Questions
- Paint Shop Supervisor Interview Questions
- Painter Interview Questions
- Spray Painter Interview Questions
- Blasting and Painting Supervisor Interview Questions
- Junior Shop Manager Interview Questions
- Show more
Motherson Automotive Technologies and Engineering Senior Engineer Paint Shop Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
|
Engineer
305
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Assistant Engineer
279
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Senior Engineer
262
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Assistant Manager
240
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Trainee Technician
238
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Sundaram Clayton
Rane Group
UNO Minda
- Home >
- Interviews >
- Motherson Automotive Technologies and Engineering Interview Questions >
- Motherson Automotive Technologies and Engineering Senior Engineer Paint Shop Interview Questions
