Be the first one to contribute and help others!
posted on 25 Oct 2017
I was interviewed before Oct 2016.
Turbine erection alignment and commissioning procedure involves the process of aligning and commissioning a turbine for optimal performance.
Turbine erection alignment involves ensuring the turbine is properly aligned with the foundation and other components.
Commissioning procedure includes testing and verifying the functionality of the turbine.
Alignment is typically done using laser alignment tools to ensure precise po...
The turbine erection sequence refers to the specific order in which the components of a turbine are assembled and installed.
The foundation is prepared and the anchor bolts are installed.
The base frame is positioned and aligned with the anchor bolts.
The turbine tower sections are lifted and assembled on top of the base frame.
The nacelle, which houses the turbine's generator and other components, is installed on top of t...
posted on 15 Nov 2020
I applied via Walk-in and was interviewed before Nov 2019. There were 3 interview rounds.
The duration and machinery requirement for dumping and compacting one lakh cum of soil.
The duration depends on the capacity of the machinery and the number of machines used.
The type of soil and the site conditions also affect the duration.
On average, it takes around 30-45 days to complete the task.
The machinery required includes excavators, bulldozers, dump trucks, and compactors.
Minor bridges are usually shorter and have a lower weight capacity than major bridges.
Major bridges are typically longer and have a higher weight capacity than minor bridges.
Minor bridges are often used for pedestrian or bike traffic, while major bridges are used for vehicles and heavy machinery.
Major bridges may require more maintenance and have a higher construction cost than minor bridges.
Examples of major bridges i...
I applied via Campus Placement and was interviewed before Feb 2021. There were 2 interview rounds.
3 tests are conducted
DCS is used for continuous processes while PLC is used for discrete processes.
DCS stands for Distributed Control System and is used for continuous processes like oil refining, power generation, etc.
PLC stands for Programmable Logic Controller and is used for discrete processes like assembly lines, packaging machines, etc.
DCS is designed to handle large amounts of data from multiple sources and control multiple processe...
Control valves regulate fluid flow by adjusting the size of the valve opening.
Control valves are used in various industries such as oil and gas, chemical, and power generation.
They work by adjusting the size of the valve opening to regulate the flow of fluid.
The valve opening is controlled by a signal from a controller, which can be manual or automated.
Control valves can be classified into different types such as globe...
A pressure switch is a device that monitors pressure levels and triggers an action when a certain pressure is reached.
Pressure switch consists of a sensing element, switch mechanism, and a pressure port.
When the pressure reaches a certain level, the sensing element triggers the switch mechanism to open or close an electrical circuit.
Pressure switches are used in various applications such as HVAC systems, water pumps, a
posted on 12 Nov 2020
I applied via Company Website and was interviewed in May 2020. There were 3 interview rounds.
MPLS is a protocol used for efficient packet forwarding. It uses labels to identify paths instead of IP addresses.
MPLS stands for Multiprotocol Label Switching
Labels are assigned to packets at the ingress router
Labels are used to identify the path a packet should take through the network
Labels are swapped at each MPLS router along the path
The last MPLS router removes the label and forwards the packet based on the IP ad...
Route reflector is a BGP feature that allows a router to advertise routes to its clients without requiring full mesh connectivity.
Route reflector reduces the number of iBGP peerings required in a network.
It helps in scaling the network by reducing the number of updates and processing required.
Route reflector can be configured in a hierarchical manner to further reduce the number of iBGP peerings.
It is commonly used in ...
I applied via Referral and was interviewed in Oct 2020. There were 3 interview rounds.
I applied via Approached by Company and was interviewed before Jun 2021. There were 2 interview rounds.
I applied via Naukri.com and was interviewed in Dec 2018. There were 3 interview rounds.
I have 5 years of experience in retail management, overseeing daily operations and leading a team of 15 employees.
Managed daily operations of a retail store
Led a team of 15 employees, providing training and guidance
Implemented strategies to increase sales and improve customer satisfaction
Handled inventory management and merchandising
Responsible for scheduling and performance evaluations
I am drawn to the company's commitment to employee development and growth opportunities.
I appreciate the company's focus on continuous learning and development
I value the opportunities for advancement within the organization
I admire the company culture and values that align with my own
I have had positive experiences with the company's products/services
I managed a project to implement a new customer relationship management system.
Led a team of 10 employees to successfully implement the CRM system
Created project timelines and milestones to ensure timely completion
Collaborated with IT department to customize the system to meet company's needs
My final year project was a research study on the impact of social media on consumer behavior.
Researched various social media platforms and their influence on consumer decision-making
Conducted surveys and interviews to gather data on consumer preferences and behaviors
Analyzed the data using statistical tools and presented findings in a comprehensive report
Suggested recommendations for businesses to leverage social medi
Six Sigma is a data-driven methodology for improving processes by reducing defects and variations.
Define: Identify problem, goals, and customer requirements.
Measure: Collect data on current process performance.
Analyze: Use statistical tools to identify root causes of defects.
Improve: Implement solutions to address root causes.
Control: Monitor process performance to sustain improvements.
Examples: GE, Motorola, and Ford ...
Project management is the process of planning, organizing, and overseeing the completion of a project within specific constraints.
Involves defining project goals, creating a timeline, allocating resources, and monitoring progress.
Requires effective communication, problem-solving skills, and the ability to adapt to changes.
Examples include software development projects, construction projects, and marketing campaigns.
Project portfolio management is the centralized management of a group of projects to achieve strategic objectives.
Involves prioritizing, planning, executing, and monitoring a group of projects
Helps organizations align projects with strategic goals
Allows for resource optimization and risk management
Examples include creating a portfolio of IT projects to improve efficiency or a portfolio of construction projects to expan
The phases of a project typically include initiation, planning, execution, monitoring and controlling, and closing.
Initiation: Defining the project, setting goals, and obtaining approval.
Planning: Creating a detailed project plan, including timelines, resources, and budget.
Execution: Carrying out the plan and completing the project deliverables.
Monitoring and Controlling: Tracking progress, managing changes, and ensuri...
Ultrasonic Testing (UT) is the NDT method used in my work.
UT uses high frequency sound waves to detect internal flaws in materials
It is commonly used in industries like aerospace, oil and gas, and manufacturing
Examples of UT equipment include ultrasonic flaw detectors and probes
Welding is a process of joining two or more metal pieces together by melting and fusing them.
There are several types of welding techniques, including MIG welding, TIG welding, arc welding, and spot welding.
Welding can be done using different heat sources such as gas flame, electric arc, laser, or ultrasound.
The choice of welding technique depends on the materials being joined, the thickness of the materials, and the de
Checking fitup involves verifying the alignment and positioning of components before welding.
Inspecting the joint for gaps or misalignment
Using measuring tools like calipers or gauges
Ensuring proper fit of parts before welding
Checking for any defects or imperfections
Verifying dimensions and angles according to specifications
Hydrotest is a procedure used to test the strength and integrity of pressure vessels or pipelines by filling them with water or another liquid.
The vessel or pipeline is filled with water or another liquid at a specified pressure.
The pressure is held for a specified duration to check for leaks or deformations.
After the test, the liquid is drained and the vessel or pipeline is inspected for any issues.
Hydrotest is common...
Power piping is used in power plants to transport steam, water, and other fluids at high temperatures and pressures, while process piping is used in industrial facilities to transport various fluids for processing.
Power piping is typically found in power plants, including nuclear, fossil fuel, and renewable energy plants.
Process piping is used in industrial facilities such as chemical plants, refineries, and manufactur...
Sensitization in Austenitic stainless steel is the process where chromium carbides form at the grain boundaries, leading to reduced corrosion resistance.
Sensitization occurs when the steel is heated in the temperature range of 450-850°C, causing chromium carbides to precipitate at the grain boundaries.
This depletion of chromium at the grain boundaries makes them susceptible to corrosion, especially in environments cont...
TIG welding is generally used for SS material due to its ability to produce high-quality, clean welds with minimal distortion.
TIG welding provides precise control over the heat input, resulting in less distortion in the stainless steel material.
TIG welding produces clean and aesthetically pleasing welds on stainless steel, making it ideal for applications where appearance is important.
The inert gas shield in TIG weldin...
My expected CTC is based on my experience, skills, and industry standards.
My expected CTC is in line with industry standards for a Senior Engineer role.
I have taken into consideration my years of experience and expertise in the field.
I am open to negotiation based on the overall compensation package offered by the company.
I applied via Approached by Company and was interviewed in Dec 2023. There were 3 interview rounds.
Pilling is the process of driving precast concrete piles into the ground to provide foundation support. I-Girder methodology involves using precast concrete girders in bridge construction.
Pilling involves driving precast concrete piles into the ground using specialized equipment
I-Girder methodology uses precast concrete girders to support bridge decks
Both processes are commonly used in construction projects to provide
Girder erection involves lifting and placing girders into position for bridge construction.
Girders are typically lifted using cranes or specialized equipment.
Proper planning and coordination are essential to ensure safety and efficiency.
Girder erection may involve the use of temporary supports or falsework.
Quality control measures are important to ensure girders are placed accurately and securely.
Examples of girder ere...
based on 1 interview
Interview experience
based on 21 reviews
Rating in categories
Civil Site Engineer
18
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
7
salaries
| ₹0 L/yr - ₹0 L/yr |
Site Engineer
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Surveyor
5
salaries
| ₹0 L/yr - ₹0 L/yr |
Project Manager
4
salaries
| ₹0 L/yr - ₹0 L/yr |
GMR Group
Adani Infra
Reliance Infrastructure
Essar Projects India