Faster and better experience!
Filter interviews by
I applied via Approached by Company and was interviewed before May 2021. There was 1 interview round.
The required minimum height to use safety harness is 6 feet or higher.
The minimum height requirement for safety harness varies depending on the industry and jurisdiction.
In general, the minimum height requirement is 6 feet or higher.
This is to ensure that workers are protected from falls and other hazards.
Employers should always follow the guidelines set by their industry and jurisdiction to ensure worker safety.
The minimum distance allowed for mechanical excavation near underground electrical cable is dependent on the voltage of the cable.
The minimum distance should be determined by a competent person
The voltage of the cable should be identified
The distance should be at least equal to the depth of the cable plus 500mm
If the voltage of the cable is higher, the distance should be greater
The excavation should be carried out care
I applied via Naukri.com and was interviewed before May 2021. There was 1 interview round.
Top trending discussions
I applied via Campus Placement and was interviewed before Apr 2021. There were 5 interview rounds.
Their were 50 questions of aptitude consisting of Maths, science, engineering (electrical+ mechanical)
Their were 10 candidate in my turn..topic was diploma engineers vs Btech Engineers. Everyone give 2 to 3 points .
Some of the top questions asked at the Metscco Heavy Steel Industries Senior HSE Officer interview -
based on 1 review
Rating in categories
Mechanical Engineer
6
salaries
| ₹4 L/yr - ₹10.4 L/yr |
Design Engineer
5
salaries
| ₹8 L/yr - ₹13.2 L/yr |
QA QC Engineer
5
salaries
| ₹10 L/yr - ₹24 L/yr |
QC Welding Inspector
5
salaries
| ₹13 L/yr - ₹16.6 L/yr |
QA QC Welding Inspector
5
salaries
| ₹13.5 L/yr - ₹16 L/yr |
Larsen & Toubro Limited
Tata Steel
JSW Steel
Steel Authority Of India