Upload Button Icon Add office photos

Filter interviews by

Metscco Heavy Steel Industries Senior Design and Static Equipment Engineer Interview Questions, Process, and Tips

Updated 27 May 2024

Metscco Heavy Steel Industries Senior Design and Static Equipment Engineer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via LinkedIn and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(8 Questions)

  • Q1. What is the difference between API 650 and API 620
  • Ans. 

    API 650 is for welded steel tanks while API 620 is for large, low pressure storage tanks.

    • API 650 is for atmospheric storage tanks designed to operate at a pressure of 2.5 psig or less.

    • API 620 is for low pressure storage tanks with design pressure of up to 15 psig.

    • API 650 covers the design, construction, operation, and maintenance of welded steel tanks.

    • API 620 covers the design and construction of large, low pressure st...

  • Answered by AI
  • Q2. What kind of material used for tank design
  • Ans. 

    Materials commonly used for tank design include carbon steel, stainless steel, and aluminum.

    • Carbon steel is often used for its strength and affordability

    • Stainless steel is preferred for its corrosion resistance

    • Aluminum is lightweight and resistant to corrosion

    • Fiberglass reinforced plastic (FRP) is also used for its corrosion resistance and durability

  • Answered by AI
  • Q3. Whether you will able to design the tank as per API 650?
  • Ans. 

    Yes, I am able to design tanks as per API 650 standards.

    • I have experience in designing tanks according to API 650 standards

    • I am familiar with the requirements and guidelines outlined in API 650

    • I have successfully designed tanks that meet API 650 specifications in the past

  • Answered by AI
  • Q4. What is the maximum size of tank you have designed or come across your experience?
  • Ans. 

    I have designed a 500,000 gallon tank for a petrochemical plant.

    • Designed a 500,000 gallon tank for a petrochemical plant

    • Ensured structural integrity and compliance with industry standards

    • Considered factors such as material selection, seismic design, and operational requirements

  • Answered by AI
  • Q5. Will you able to design the fire water tank with aluminium roof?
  • Ans. 

    Yes, I am able to design the fire water tank with an aluminium roof.

    • Yes, I have experience in designing static equipment including fire water tanks.

    • Aluminium roofs are commonly used in fire water tanks due to their lightweight and corrosion resistance.

    • Proper insulation and ventilation must be considered when designing an aluminium roof for a fire water tank.

  • Answered by AI
  • Q6. Will you design the tank as per Aramco standard? Do you have any ARAMCO project experience?
  • Ans. 

    Yes, I will design the tank as per Aramco standard and have experience working on ARAMCO projects.

    • Yes, I am familiar with Aramco standards and have experience designing tanks to meet their requirements.

    • I have worked on multiple ARAMCO projects in the past, including designing static equipment such as tanks.

    • I am well-versed in the specific guidelines and specifications outlined by Aramco for tank design.

  • Answered by AI
  • Q7. Do you need any training for the tank design?
  • Q8. Whether you can able to do the tank detailed listen without others help

Interview questions from similar companies

I appeared for an interview before May 2020.

Interview Questionnaire 

2 Questions

  • Q1. Tell me something about yourself
  • Ans. 

    I am a highly motivated and experienced professional with a strong background in management and leadership.

    • I have over 5 years of experience in management roles, including 2 years as an Assistant Manager at XYZ Company.

    • I have successfully led teams of up to 20 employees, ensuring efficient operations and high customer satisfaction.

    • I am skilled in strategic planning, problem-solving, and decision-making, which have cont...

  • Answered by AI
  • Q2. Please tell me about your 3 strengths and 3 weakness.
  • Ans. 

    My strengths are leadership, problem-solving, and communication. My weaknesses are time management, delegation, and public speaking.

    • Strength: Leadership - I have a natural ability to inspire and motivate a team, and I excel at guiding others towards achieving common goals.

    • Strength: Problem-solving - I am skilled at analyzing complex situations, identifying potential solutions, and making informed decisions.

    • Strength: Co...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Firstly prepare yourself with good professional attire. Shoes, tie, formal shirt and pants. Comb neatly. You should look good in simple word.
Secondly, do home work about job profile, company and basics of your study, read your Cv and emove errors if any. Read company reviews before going for interview.
Thirdly, greet interviewer while entering room, reach 15 minutes before interview, seat calm and get you cool at new place. When answering questions do not be over smart, do not lie, do not show attitude in language. Be confident and clear in communication. Try to speak in English only. If required then use local language.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Not Selected

I applied via Company Website and was interviewed in Sep 2023. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Technical questions
  • Q2. Line experience tell about.
  • Q3. Company safety and work process.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is dri sponge iron
  • Ans. 

    DRI sponge iron is a type of iron produced from direct reduction of iron ore using natural gas or coal as a reducing agent.

    • DRI stands for Direct Reduced Iron

    • Produced by reducing iron ore in the form of lumps, pellets, or fines

    • Commonly used in steelmaking processes as a substitute for scrap iron

  • Answered by AI
  • Q2. How can increase campaign life of dri kiln
  • Ans. 

    To increase the campaign life of a dri kiln, proper maintenance, monitoring of operating conditions, and regular inspections are essential.

    • Implement a regular maintenance schedule to ensure all components are functioning properly.

    • Monitor operating conditions such as temperature, pressure, and feed rate to optimize performance.

    • Conduct regular inspections to identify and address any potential issues before they escalate.

    • ...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - HR 

(5 Questions)

  • Q1. About Captain steel India Limited
  • Q2. TMT Ribber knowledge about Market.
  • Q3. Previous company Designation of Employee
  • Ans. 

    Senior Sales Executive

    • Managed a team of 10 sales representatives

    • Exceeded sales targets by 20% in the last quarter

    • Implemented new sales strategies to increase revenue

  • Answered by AI
  • Q4. Academic qualification of Employee and market knowledge experience gained.
  • Q5. Also question previous company designation and Salary

I appeared for an interview before Jan 2021.

Interview Questionnaire 

1 Question

  • Q1. Max what ever you kept in resume in that only they were asked questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and if u are good in technical it is good
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About projects we have done
  • Q2. About Siemens PLC

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare from basics to advanced
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Oct 2022. There were 3 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Wt is ndt testing
  • Ans. 

    NDT testing, or non-destructive testing, is a method used to evaluate the properties of a material, component, or system without causing damage.

    • NDT testing is used to detect defects or inconsistencies in materials or structures.

    • Common methods of NDT testing include ultrasonic testing, radiographic testing, magnetic particle testing, and dye penetrant testing.

    • NDT testing is often used in industries such as aerospace, au...

  • Answered by AI
  • Q2. Tell me some ndt standards and acceptances
  • Ans. 

    NDT standards and acceptances are crucial for ensuring the quality and safety of engineering projects.

    • ASNT (American Society for Nondestructive Testing) standards are widely used in the industry

    • ISO 9712 is an international standard for qualification and certification of NDT personnel

    • Acceptance criteria for NDT inspections are often specified in codes such as ASME Boiler and Pressure Vessel Code

    • ASTM E1444/E1444M is a st...

  • Answered by AI
  • Q3. Wt is defarance between PAUT and Narmal UT
  • Ans. 

    PAUT is an advanced form of UT that uses multiple elements to inspect a larger area in a single scan, while normal UT uses a single element probe for inspection.

    • PAUT uses multiple elements to inspect a larger area in a single scan, increasing efficiency and coverage.

    • Normal UT uses a single element probe for inspection, limiting the area that can be scanned at once.

    • PAUT provides better imaging and data collection capabi...

  • Answered by AI
Round 2 - HR 

(2 Questions)

  • Q1. How many years expearins
  • Ans. 

    I have 10 years of experience in the field.

    • 10 years of experience in senior engineering roles

    • Extensive knowledge and skills acquired over the years

    • Proven track record of successful projects completed

    • Experience in leading teams and mentoring junior engineers

  • Answered by AI
  • Q2. What reoson for leaved privious company
  • Ans. 

    I left my previous company to pursue new challenges and opportunities for growth.

    • Seeking new challenges and opportunities for growth

    • Desire for career advancement

    • Change in company culture or management

    • Relocation to a different city or country

    • Better work-life balance

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Salory expertation
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - HR 

(6 Questions)

  • Q1. Tell me about your self
  • Ans. 

    Experienced sales executive with a proven track record of exceeding targets and building strong client relationships.

    • Over 5 years of sales experience in the technology industry

    • Consistently met or exceeded sales targets by 20% each quarter

    • Built and maintained relationships with key clients such as ABC Company and XYZ Corporation

  • Answered by AI
  • Q2. What is your two weakness and strength
  • Ans. 

    My strengths include strong communication skills and ability to build relationships. My weaknesses are sometimes being too detail-oriented and struggling with time management.

    • Strength: Strong communication skills - able to effectively convey information and build rapport with clients

    • Strength: Relationship building - skilled at developing and maintaining long-lasting connections with customers

    • Weakness: Detail-oriented -...

  • Answered by AI
  • Q3. Tell four quality of a sales Executive
  • Ans. 

    A sales executive should possess strong communication skills, be goal-oriented, have a good understanding of the product/service being sold, and be able to build strong relationships with clients.

    • Strong communication skills - ability to effectively communicate with clients and team members

    • Goal-oriented - setting and achieving sales targets

    • Product/service knowledge - understanding the features and benefits of what is be...

  • Answered by AI
  • Q4. How to observe dealer and retailer
  • Ans. 

    Observing dealers and retailers involves monitoring their sales performance, customer interactions, and market trends.

    • Regularly visit dealers and retailers to observe their sales techniques and customer interactions

    • Analyze sales data and trends to identify areas for improvement or growth

    • Attend industry events and trade shows to stay updated on market trends and competitor activities

    • Seek feedback from dealers and retail...

  • Answered by AI
  • Q5. How built new market
  • Ans. 

    To build a new market, research the target audience, create a unique value proposition, develop a marketing strategy, and establish partnerships.

    • Research the target audience to understand their needs and preferences

    • Create a unique value proposition that sets your product or service apart from competitors

    • Develop a marketing strategy to reach and engage potential customers

    • Establish partnerships with key stakeholders to e

  • Answered by AI
  • Q6. How to connect influencer for our company
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Self introduction , working experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Just speek about positive things

Metscco Heavy Steel Industries Interview FAQs

How many rounds are there in Metscco Heavy Steel Industries Senior Design and Static Equipment Engineer interview?
Metscco Heavy Steel Industries interview process usually has 1 rounds. The most common rounds in the Metscco Heavy Steel Industries interview process are Technical.
What are the top questions asked in Metscco Heavy Steel Industries Senior Design and Static Equipment Engineer interview?

Some of the top questions asked at the Metscco Heavy Steel Industries Senior Design and Static Equipment Engineer interview -

  1. What is the maximum size of tank you have designed or come across your experien...read more
  2. Whether you will able to design the tank as per API 6...read more
  3. Will you able to design the fire water tank with aluminium ro...read more

Tell us how to improve this page.

Metscco Heavy Steel Industries Senior Design and Static Equipment Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

ArcelorMittal Interview Questions
4.0
 • 30 Interviews
Arjas Steel Interview Questions
4.2
 • 18 Interviews
Kalyani Forge Interview Questions
3.4
 • 13 Interviews
Srmb Steel Interview Questions
3.4
 • 9 Interviews
View all
Mechanical Engineer
6 salaries
unlock blur

₹4 L/yr - ₹10.4 L/yr

Design Engineer
5 salaries
unlock blur

₹8 L/yr - ₹13.2 L/yr

QA QC Welding Inspector
5 salaries
unlock blur

₹13.5 L/yr - ₹16 L/yr

QC Welding Inspector
5 salaries
unlock blur

₹13 L/yr - ₹16.6 L/yr

QA QC Engineer
5 salaries
unlock blur

₹10 L/yr - ₹24 L/yr

Explore more salaries
Compare Metscco Heavy Steel Industries with

ArcelorMittal

4.0
Compare

Tata Steel Downstream Products

3.7
Compare

Tata BlueScope Steel

3.7
Compare

Captain Steel India Limited

4.4
Compare
Did you find this page helpful?
Yes No
write
Share an Interview