Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Lutron Electronics Intern Interview Questions and Answers

Updated 22 Oct 2024

Lutron Electronics Intern Interview Experiences

1 interview found

Intern Interview Questions & Answers

user image Anonymous

posted on 22 Oct 2024

Interview experience
2
Poor
Difficulty level
Hard
Process Duration
4-6 weeks
Result
No response

I applied via Job Fair and was interviewed in Sep 2024. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. What does a stress-strain diagram look like?
  • Ans. 

    A stress-strain diagram shows the relationship between stress (force applied) and strain (resulting deformation) in a material.

    • The diagram typically starts with a linear elastic region where stress is directly proportional to strain.

    • After the elastic limit, the material enters the plastic region where it deforms permanently.

    • Finally, the material reaches its ultimate strength before failure occurs.

    • Examples of stress-str...

  • Answered by AI

Interview questions from similar companies

I was interviewed in Sep 2017.

Interview Questionnaire 

2 Questions

  • Q1. Sorting algorithm
  • Ans. 

    A sorting algorithm is a method of arranging elements in a specific order.

    • Sorting algorithms can be categorized as comparison-based or non-comparison-based.

    • Common sorting algorithms include bubble sort, insertion sort, selection sort, merge sort, quicksort, and heapsort.

    • Efficiency of sorting algorithms is measured by their time complexity, space complexity, and stability.

    • Example: Sorting an array of strings in alphabet

  • Answered by AI
  • Q2. Intro, why should i hire you?, inspiration from?

Interview Preparation Tips

Round: Test
Experience: An online aptitude test was taken.
Tips: Should have the knowledge regarding technical.
Duration: 1 hour
Total Questions: 45

Round: Technical Interview
Experience: Should explain the interviewer each and every detail regarding that algorithm.
Tips: Should have basic knowledge about the subject mentioned in the Area of interest column.

Round: HR Interview
Experience: Just be confident. And always praise yourself.

Skills: Technical Skill, Inter Person Communication Skills
College Name: Mody University Of Science And Technology, Sikar

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is Stress? What is the significance of Bending Moment Diagram?
  • Ans. 

    Stress is the internal resistance experienced by a material when subjected to external forces. Bending Moment Diagram is a graphical representation of the variation of bending moment along the length of a beam.

    • Stress is the force per unit area experienced by a material.

    • It is caused by external forces acting on a material.

    • Stress can be tensile (stretching), compressive (squeezing), or shear (sliding).

    • Bending Moment Diag...

  • Answered by AI
  • Q2. What is Strain? Draw SFD and BMD of cantilever and Simply supported beam.
  • Ans. 

    Strain is the measure of deformation in a material due to applied stress.

    • Strain is a dimensionless quantity that represents the ratio of the change in length or shape of a material to its original length or shape.

    • It is typically expressed as a percentage or in microstrain (με).

    • Strain can be caused by tensile, compressive, or shear stress.

    • In a cantilever beam, the SFD (Shear Force Diagram) will show a constant positive ...

  • Answered by AI

I applied via Campus Placement and was interviewed before May 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Design fan.What is bm? What is nozzle?
  • Ans. 

    BM stands for Blade Material. Nozzle is a device that directs or controls the flow of a fluid.

    • BM refers to the material used to make the blades of a fan. It can be plastic, metal, or wood.

    • Nozzle is a component that is used to control the flow of a fluid, such as air or water. It can be found in various devices, such as a garden hose or a spray bottle.

    • In a fan, the nozzle is the part that directs the air flow in a speci...

  • Answered by AI
  • Q2. Design blower for industry
  • Ans. 

    Designing a blower for industrial use requires consideration of factors such as air flow rate, pressure, power consumption, and noise level.

    • Determine the required air flow rate and pressure for the specific application

    • Select an appropriate blower type (centrifugal, axial, etc.) based on the requirements

    • Calculate the power consumption and efficiency of the blower

    • Consider noise level and implement noise reduction measure...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Stay calm and confident
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Basic dl,ml questions

Intern Interview Questions & Answers

Siemens user image Nilesh Patil

posted on 23 Mar 2024

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Technical 

(2 Questions)

  • Q1. Mechanical and project related question
  • Q2. Hobbies and interest
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It was a regular test with aptitude, verbal reasoning, logical reasoning and also technical questions.

Round 2 - One-on-one 

(1 Question)

  • Q1. They asked about my internship.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Domain basefd aptitude test consisting of gamified assessments and mcqs

Round 3 - Technical 

(1 Question)

  • Q1. 30 min technical interview with 2 panelists
Round 4 - Technical 

(1 Question)

  • Q1. 15 min technical interview with a French national

Interview Preparation Tips

Topics to prepare for Schneider Electric Intern interview:
  • PLC
  • Sensors

I applied via Referral and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - One-on-one 

(4 Questions)

  • Q1. General questions about resume
  • Q2. Questions on basic instrumentation cpncepts
  • Q3. Any plan for higher studies?
  • Q4. Do you know python programming language?
  • Ans. 

    Yes, I know Python programming language.

    • I have experience in writing Python scripts for automation and data analysis.

    • I am familiar with popular Python libraries such as NumPy, Pandas, and Matplotlib.

    • I have also worked on Python web frameworks like Django and Flask.

    • I am comfortable with object-oriented programming concepts in Python.

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Johnson Controls Intern interview:
  • Python
  • PowerBI
Interview preparation tips for other job seekers - Be fully prepared about whatever you've written on resume.

Skills evaluated in this interview

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It was easy and few topics related to communication

Round 2 - Technical 

(2 Questions)

  • Q1. Moderate questions
  • Q2. About projects and analog questions
Round 3 - One-on-one 

(2 Questions)

  • Q1. Was moderate and some technical questions
  • Q2. Technical and hr questions
Contribute & help others!
anonymous
You can choose to be anonymous

Lutron Electronics Interview FAQs

How many rounds are there in Lutron Electronics Intern interview?
Lutron Electronics interview process usually has 1 rounds. The most common rounds in the Lutron Electronics interview process are Technical.

Recently Viewed

SALARIES

Lutron Electronics

INTERVIEWS

Delta Electronics

No Interviews

JOBS

Delta Electronics

No Jobs

JOBS

Delta Electronics

No Jobs

INTERVIEWS

IntouchCX

No Interviews

LIST OF COMPANIES

OpenXcell Technolabs

Overview

SALARIES

Delta Electronics

INTERVIEWS

FANUC

No Interviews

INTERVIEWS

Promatics Technologies

No Interviews

SALARIES

OpenXcell Technolabs

Tell us how to improve this page.

Lutron Electronics Intern Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more
Assistant Project Manager
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

HR Business Partner
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Field Service Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Customer Service Executive
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Lutron Electronics with

Legrand

3.7
Compare

Siemens

4.1
Compare

Honeywell Automation

3.8
Compare

ABB

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview