Upload Button Icon Add office photos

LM Wind Power

Compare button icon Compare button icon Compare

Filter interviews by

LM Wind Power Quality Inspector Interview Questions and Answers

Updated 13 Aug 2021

LM Wind Power Quality Inspector Interview Experiences

1 interview found

Interview Questionnaire 

2 Questions

  • Q1. About my role
  • Q2. Quality inspector in moulding area in vestas
  • Ans. 

    As a quality inspector in the moulding area at Vestas, my role would be to ensure that the products meet the required quality standards.

    • Conducting inspections on moulded products to ensure they meet quality standards

    • Identifying defects and working with production teams to address them

    • Maintaining accurate records of inspections and defects

    • Collaborating with other quality inspectors and managers to continuously improve q...

  • Answered by AI

Interview questions from similar companies

I applied via Company Website and was interviewed before Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. If you have property then only you can join INOX. Salary is delayed by 5 months.
  • Q2. We will not give you salary on time will you able to join.
  • Q3. Here no management at site, then how you will manage.
  • Ans. 

    I will ensure clear communication channels are established with remote management and implement effective quality control measures.

    • Establish clear communication channels with remote management

    • Implement effective quality control measures

    • Ensure all team members are aware of quality standards and expectations

    • Regularly review and assess quality control processes

    • Utilize technology and software to aid in quality control

    • Maint...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You can join INOX if your father have lot of money. Otherwise learn to work without salary...😊

I applied via Company Website and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Pulling Sub Stesan Experience
  • Ans. 

    Pulling sub-stesan experience

    • Sub-stesan refers to a subset of a larger system or process

    • Pulling sub-stesan experience means extracting relevant information from a smaller part of a system

    • This experience can be useful in identifying and solving specific quality issues

    • Examples include analyzing data from a specific production line or testing a particular component of a product

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Quality and sub stesan Experience Engineer post

I was interviewed in Jan 2021.

Interview Questionnaire 

1 Question

  • Q1. Quality related questions, concrete grade,is code, billing,how to observe to any structure for quality engineer,how to problem identify and solve.

Interview Preparation Tips

Interview preparation tips for other job seekers - Clean ans. For any questions
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

90 question in 90 minutes are given

Round 3 - Technical 

(2 Questions)

  • Q1. 30 question in 30 minutes are given
  • Q2. Say something about your experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical knowledge should have been properly practice
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Apr 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Electrical and electronics Power factor Motor
Round 3 - Technical 

(4 Questions)

  • Q1. What is sinosodal wave
  • Ans. 

    A sinusoidal wave is a type of wave that has a smooth, repetitive oscillation resembling a sine curve.

    • Sinusoidal waves are characterized by their amplitude, frequency, and phase.

    • They are commonly seen in AC electrical circuits, sound waves, and light waves.

    • The equation for a sinusoidal wave is typically represented as y = A*sin(2*pi*f*t + phi), where A is the amplitude, f is the frequency, t is time, and phi is the pha...

  • Answered by AI
  • Q2. What is peak factor
  • Ans. 

    Peak factor is the ratio of peak value to the RMS value of a waveform.

    • Peak factor is used to quantify the peakiness of a waveform.

    • It is calculated by dividing the peak value of the waveform by its RMS value.

    • A higher peak factor indicates a more peaky waveform with larger peaks relative to the average value.

    • Peak factor is important in signal processing and power systems analysis.

  • Answered by AI
  • Q3. What is motor Stator and rotor
  • Ans. 

    The stator and rotor are key components of an electric motor. The stator is the stationary part that generates a magnetic field, while the rotor is the rotating part that interacts with the magnetic field to produce motion.

    • Stator is the stationary part of an electric motor

    • Stator generates a magnetic field

    • Rotor is the rotating part of an electric motor

    • Rotor interacts with the magnetic field generated by the stator to pr

  • Answered by AI
  • Q4. Motor is a electrical machine and electrical energy convert mechanical energy

Interview Preparation Tips

Interview preparation tips for other job seekers - I am learning purpose job and best performance
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Fetch file from resources folder in java folder structure
  • Ans. 

    To fetch a file from the resources folder in a Java folder structure, use ClassLoader.getResourceAsStream() method.

    • Use ClassLoader.getResourceAsStream() method to load the file as an InputStream

    • Specify the path to the file relative to the resources folder

    • Handle the IOException that may be thrown

  • Answered by AI
  • Q2. Write xpaths of apple site menua
  • Ans. 

    Xpaths of Apple site menu

    • //*[@id='ac-globalnav']/div/ul/li[1]/a

    • //*[@id='ac-globalnav']/div/ul/li[2]/a

    • //*[@id='ac-globalnav']/div/ul/li[3]/a

    • //*[@id='ac-globalnav']/div/ul/li[4]/a

    • //*[@id='ac-globalnav']/div/ul/li[5]/a

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jul 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. About generator alignment
  • Q2. About generator slip
  • Q3. About DFIG

Interview Preparation Tips

Interview preparation tips for other job seekers - during interview you always explain deeply any topic interviewar asking
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(1 Question)

  • Q1. Functional and Work Experience related.
Round 2 - HR 

(1 Question)

  • Q1. Salary and Location Negotiations

I applied via Company Website and was interviewed in Apr 2021. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Tell me about your self?
  • Q2. How much experience in wind field?
  • Ans. 

    I have 2 years of experience in the wind field.

    • I have worked on wind turbine design and optimization projects.

    • I have conducted wind resource assessments for potential wind farm sites.

    • I have experience in analyzing wind data and performing wind flow modeling.

    • I have knowledge of wind energy conversion systems and their components.

    • I have worked with software tools like WindPRO and WAsP for wind energy analysis.

  • Answered by AI
  • Q3. What's your response bilty in previous company?

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidential give the all questions answered.

Tell us how to improve this page.

Interview Questions from Similar Companies

Adani Group Interview Questions
3.9
 • 186 Interviews
Tata Power Interview Questions
3.9
 • 162 Interviews
NTPC Interview Questions
4.2
 • 159 Interviews
Suzlon Group Interview Questions
4.1
 • 129 Interviews
Eaton Interview Questions
3.9
 • 118 Interviews
Vestas Interview Questions
4.3
 • 83 Interviews
GE Vernova Interview Questions
4.1
 • 82 Interviews
Hitachi Energy Interview Questions
4.1
 • 81 Interviews
Siemens Energy Interview Questions
4.1
 • 73 Interviews
View all
LM Wind Power Quality Inspector Salary
based on 5 salaries
₹2.5 L/yr - ₹3.6 L/yr
23% more than the average Quality Inspector Salary in India
View more details

LM Wind Power Quality Inspector Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

5.0

Company culture

5.0

Promotions

5.0

Work satisfaction

Explore 2 Reviews and Ratings
Production Operator
54 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Controller
53 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Operator
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Advanced Engineer
28 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Team Lead
28 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare LM Wind Power with

Suzlon Group

4.1
Compare

Vestas

4.2
Compare

Inox Wind

3.7
Compare

GE Vernova

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview