LCC Projects
10+ Fluent Health Interview Questions and Answers
Q1. FHTC full form & How to install connection for tap
FHTC stands for Flexible High Temperature Cable. To install connection for tap, follow these steps:
Turn off the water supply to the tap
Remove the existing tap connection
Clean the area around the tap connection
Apply plumber's tape to the threaded end of the tap connection
Insert the tap connection into the water supply line
Tighten the connection using a wrench
Turn on the water supply and check for any leaks
Q2. Full form of HDPE Pipe
HDPE stands for High-Density Polyethylene.
HDPE is a type of plastic pipe commonly used in various applications.
It is known for its high strength, durability, and resistance to corrosion.
HDPE pipes are widely used in water supply systems, sewage systems, gas distribution networks, and industrial applications.
They are lightweight, flexible, and easy to install.
HDPE pipes have a long service life and are environmentally friendly.
Examples of HDPE pipe applications include irrigat...read more
Q3. Conjmption of cement m-15 grade pcc per cum
The consumption of cement for M-15 grade PCC per cubic meter is typically around 240 kg.
The consumption of cement for M-15 grade PCC is usually around 240 kg per cubic meter.
This value may vary slightly based on factors such as mix design and site conditions.
It is important to accurately calculate the quantity of cement needed to ensure the strength and durability of the concrete.
For example, for a 1 cubic meter of M-15 grade PCC, approximately 240 kg of cement would be requi...read more
Q4. Why is heat in concrete ?
Heat is generated in concrete due to exothermic chemical reactions during the hydration process.
Heat is generated during the chemical reaction between cement and water.
The heat generated can cause thermal expansion and cracking in concrete.
The amount of heat generated depends on the type of cement used and the curing conditions.
Heat can be controlled by using low-heat cement or by cooling the concrete during curing.
Heat can also be used to advantage in cold weather to acceler...read more
Q5. What are used filter media
Used filter media are materials used in filtration systems to remove impurities from water or air.
Sand
Activated carbon
Zeolite
Anthracite
Gravel
Q6. What is the nominal cover for pipeline
Nominal cover for pipeline refers to the minimum thickness of concrete cover over the reinforcement in a pipeline.
Nominal cover is typically specified in project specifications or design drawings.
The purpose of nominal cover is to protect the reinforcement from corrosion and provide durability to the pipeline.
The nominal cover for pipelines can vary depending on factors such as the type of pipeline, environmental conditions, and design requirements.
For example, the nominal co...read more
Q7. What is no. Of test for soil Matairial sample
The number of tests for soil material samples varies depending on the specific requirements and standards.
The number of tests for soil material samples can range from a few basic tests to more comprehensive testing depending on the project requirements.
Common tests for soil material samples include moisture content, particle size distribution, compaction, and strength tests.
The number of tests may also depend on the type of soil being tested, such as clay, sand, or gravel.
Add...read more
Q8. To calculate a BBS for footing.
To calculate a BBS for footing, you need to determine the size and spacing of reinforcement bars required for the footing construction.
Calculate the total area of the footing
Determine the design requirements for the footing (such as load capacity)
Select the appropriate size and spacing of reinforcement bars based on design requirements
Calculate the total length of reinforcement bars needed for the footing
Prepare a detailed Bar Bending Schedule (BBS) showing the size, spacing,...read more
Q9. What is PTW?
PTW stands for Permit to Work, a formal written system used to control certain types of work that are identified as potentially hazardous.
PTW is used to ensure that proper precautions are taken before starting work in hazardous environments.
It involves a formal written authorization that specifies the work to be done and the precautions to be taken.
Examples of work that may require a PTW include hot work, confined space entry, and working at heights.
Q10. Dangers level in height?
Height poses significant dangers due to potential falls and impact injuries.
Working at heights requires proper training and equipment to prevent falls
Potential hazards include unstable surfaces, improper scaffolding, and lack of guardrails
Fall protection measures such as harnesses, safety nets, and guardrails should be in place
Regular inspections and maintenance of equipment and structures at height are crucial to prevent accidents
Q11. Mathematical Formula
The question is asking for a mathematical formula.
Identify the variables and constants in the formula
Understand the relationship between the variables
Apply the formula to solve the problem
Top HR Questions asked in Fluent Health
Interview Process at Fluent Health
Top Interview Questions from Similar Companies
Reviews
Interviews
Salaries
Users/Month