AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
La-Gajjar Machineries Service Engineer Interview Questions, Process, and Tips for Experienced
La-Gajjar Machineries Service Engineer Interview Experiences for Experienced
1 interview found
Interview Questionnaire
6 Questions
- Q1. Type of stator
- Ans.
The type of stator refers to the design and configuration of the stationary part of an electric motor or generator.
The type of stator can vary depending on the specific application and motor design.
Common types of stators include squirrel cage, wound rotor, and permanent magnet stators.
Squirrel cage stators are widely used in induction motors and consist of laminated iron cores with copper or aluminum bars embedded in ...
- Q2. Dol or star delta
- Q3. What use of pressure cup in motor
- Ans.
Pressure cup is used to measure the pressure of lubrication oil in the motor.
Pressure cup is attached to the motor to measure the pressure of lubrication oil.
It helps in ensuring that the oil pressure is within the recommended range.
If the pressure is too low, it can cause damage to the motor.
If the pressure is too high, it can cause oil leaks and other issues.
Regular monitoring of oil pressure using pressure cup can h
- Q4. Reduce the temperature
- Ans.
To reduce the temperature, we can adjust the thermostat or use cooling methods.
Adjust the thermostat to a lower temperature
Use fans or air conditioning to cool the room
Apply a cold compress to the body
Drink cold water or other cold beverages
Take a cool shower or bath
- Q5. When motor run in shut off head Ampere increase or decrease?
- Ans.
Ampere increases when motor runs in shut off head.
Ampere is the measure of electrical current.
Shut off head is the maximum head that a pump can generate.
When the motor runs in shut off head, it experiences maximum resistance, causing the current to increase.
- Q6. Ampere decrease because flow is directly proportion to current
- Ans.
Ampere decreases because current flow is directly proportional to current.
Current flow and amperage are directly related.
As current flow decreases, amperage decreases.
Ohm's Law states that amperage is equal to voltage divided by resistance.
Top trending discussions
Interview questions from similar companies
Selected
I applied via Naukri.com and was interviewed before Apr 2023. There were 3 interview rounds.
(4 Questions)
- Q1. Teamcenter Architecture?
- Q2. Dispatcher function?
- Ans.
Dispatcher function is responsible for managing and coordinating tasks or requests within a system.
Coordinates tasks or requests to appropriate resources
Prioritizes tasks based on urgency or importance
Tracks progress and updates stakeholders
Handles incoming requests and assigns them to available resources
Examples: task scheduler in an operating system, job dispatcher in a computing cluster
- Q3. Steps of cloning?
- Ans.
Cloning involves the process of creating a genetically identical copy of an organism.
Isolate the DNA from the organism to be cloned
Insert the DNA into a vector, such as a plasmid
Introduce the vector into a host cell, such as a bacteria or yeast
Allow the host cell to replicate, creating multiple copies of the DNA
Grow the host cell into a full organism with the same genetic makeup as the original
- Q4. Workflow designer?
(2 Questions)
- Q1. Area of expertise?
- Q2. Steps to resolve a problem?
- Ans.
Identify, analyze, brainstorm solutions, implement, evaluate, and document.
Identify the problem by gathering information and understanding the root cause.
Analyze the problem to determine the best course of action.
Brainstorm potential solutions with team members or stakeholders.
Implement the chosen solution and monitor its effectiveness.
Evaluate the outcome to ensure the problem is resolved and document the process for
(2 Questions)
- Q1. Ready to reallocate?
- Ans.
Yes, I am ready to reallocate for the right opportunity.
I am open to relocating for the right job opportunity that aligns with my career goals.
I have experience moving for previous roles and am comfortable with the process.
I understand the benefits of relocating, such as new experiences and career growth.
- Q2. Salary discussion
Interview Preparation Tips
Skills evaluated in this interview
atul rai
Power electronics
Maximum rating of ups ever install by me
(1 Question)
- Q1. Why you want to join aur company
Interview Preparation Tips
Service Engineer Interview Questions & Answers
Essae Digitronics
Prathamesh kolur
posted on 1 Apr 2023
Selected
I applied via Referral and was interviewed in May 2022. There were 3 interview rounds.
Gk,reasoning maths qution online exam
(1 Question)
- Q1. Electronics components used and registaance
- Ans.
Electronics components used in service engineering include resistors, capacitors, diodes, transistors, and integrated circuits.
Resistors are used to limit current flow and adjust voltage levels.
Capacitors store and release electrical energy.
Diodes allow current to flow in only one direction.
Transistors amplify or switch electronic signals.
Integrated circuits contain multiple components on a single chip.
I appeared for an interview before Feb 2024.
(5 Questions)
- Q1. What are the quality standards for weighbridges?
- Ans.
Quality standards for weighbridges ensure accuracy, reliability, and safety in weighing operations.
Weighbridges should comply with national and international standards such as OIML R76 and ASTM E-4.
Regular calibration and maintenance are essential to ensure accuracy.
Weighbridges should have a high load capacity and be able to withstand harsh environmental conditions.
Safety features such as overload protection and anti-...
- Q2. Service and customer satisfaction
- Q3. Weight brighe lode cell quality best
- Q4. Customer satisfaction
- Q5. Weight bridge and service best
I applied via Naukri.com and was interviewed in May 2022. There was 1 interview round.
(1 Question)
- Q1. 4g architecture & interface, protocol
Interview Preparation Tips
Job seach like it's your job.
Pump yourself up and stay positive.
Electrical Engineer Interview Questions & Answers
Pyrotech Electronics
Vilok Jain
posted on 10 Sep 2023
Selected
I applied via Walk-in and was interviewed in Mar 2023. There were 3 interview rounds.
Normal questions of logical and reasoning
(1 Question)
- Q1. Analog electronics and power electronics questions
I applied via Campus Placement and was interviewed in Feb 2022. There were 2 interview rounds.
Personal details related questions
Like hobbies and where are you from and goals and a family background etc
(1 Question)
- Q1. Our branch related questions Like electrical engineer in generator alternator and current questions ask him.
Interview Preparation Tips
Qualification background and what was higher qualification and and qualification according questions ask him.
Just like technical questions like a electrical engineer related to all basic questions and Mechanical Engineer related to all basic questions.
Selected
I applied via Walk-in and was interviewed before Mar 2022. There were 3 interview rounds.
(3 Questions)
- Q1. Briefly explain motor
- Ans.
A motor is a device that converts electrical energy into mechanical energy to produce motion.
Motors come in various types such as AC motors, DC motors, stepper motors, and servo motors.
They are used in a wide range of applications such as industrial machinery, household appliances, and vehicles.
The basic components of a motor include a rotor, stator, and commutator or slip rings.
Motors can be controlled using various m...
- Q2. What do you know about transformer
- Ans.
A transformer is an electrical device that transfers electrical energy from one circuit to another through electromagnetic induction.
Transformers are used to increase or decrease the voltage of an alternating current (AC) power supply.
They consist of two coils of wire wrapped around a magnetic core.
The coil that receives the electrical energy is called the primary coil, while the coil that delivers the energy is called...
- Q3. Power system and circuit
(1 Question)
- Q1. Tell me about your experience
Interview Preparation Tips
Electrical Engineer Interview Questions & Answers
Pyrotech Electronics
Anonymous
posted on 6 Oct 2024
I applied via Approached by Company and was interviewed in Sep 2024. There were 2 interview rounds.
The test about the aptitude questions asked normally
Design of system and electrical grid network
La-Gajjar Machineries Interview FAQs
Some of the top questions asked at the La-Gajjar Machineries Service Engineer interview for experienced candidates -
Tell us how to improve this page.
La-Gajjar Machineries Interviews By Designations
- La-Gajjar Machineries Area Sales Manager Interview Questions
- La-Gajjar Machineries Safety Officer Interview Questions
- La-Gajjar Machineries Software Developer Interview Questions
- La-Gajjar Machineries Telli Caller Interview Questions
- La-Gajjar Machineries Service Engineer Interview Questions
- La-Gajjar Machineries Deputy Manager Interview Questions
Interview Questions for Popular Designations
- Service Advisor Interview Questions
- Senior Service Engineer Interview Questions
- Customer Service Executive Interview Questions
- Service Technician Interview Questions
- Customer Service Associate Interview Questions
- Servicenow Developer Interview Questions
- Field Service Engineer Interview Questions
- Service Manager Interview Questions
- Show more
Interview Questions from Similar Companies
La-Gajjar Machineries Service Engineer Reviews and Ratings
based on 5 reviews
Rating in categories
|
Production Engineer
35
salaries
|  ₹1.3 L/yr - ₹3.6 L/yr |
|
Assistant Manager
23
salaries
| ₹4.8 L/yr - ₹8.4 L/yr |
|
Sales Officer
23
salaries
| ₹2.2 L/yr - ₹3.9 L/yr |
|
Area Sales Manager
20
salaries
| ₹5 L/yr - ₹10 L/yr |
|
Senior Engineer
13
salaries
| ₹2.3 L/yr - ₹6.4 L/yr |
JBS Enterprises
Essae Digitronics
East India Technologies
Pyrotech Electronics
- Home >
- Interviews >
- La-Gajjar Machineries Interview Questions >
- La-Gajjar Machineries Service Engineer Interview Questions for Experienced
