Upload Button Icon Add office photos

KTM

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

KTM Graduate Trainee Interview Questions and Answers

Updated 10 Oct 2020

KTM Graduate Trainee Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed before Oct 2019. There were 3 interview rounds.

Interview Questionnaire 

8 Questions

  • Q1. 1. Tolerances of each and every machining process.
  • Ans. 

    Tolerances of machining processes refer to the allowable deviation from the desired measurements.

    • Tolerances vary depending on the type of machining process used.

    • Factors that affect tolerances include the material being machined, the tool used, and the desired accuracy.

    • Examples of machining processes and their tolerances include turning (0.025-0.05mm), milling (0.025-0.1mm), and drilling (0.025-0.05mm).

  • Answered by AI
  • Q2. 2. Design a hydraulic breaking system with single master cylinder
  • Ans. 

    A hydraulic braking system with a single master cylinder can be designed using a few key components.

    • The system will require a master cylinder, brake lines, and brake calipers.

    • The master cylinder will be responsible for generating hydraulic pressure.

    • The brake lines will transport the hydraulic fluid to the brake calipers.

    • The brake calipers will use the hydraulic pressure to clamp down on the brake rotors and slow the ve...

  • Answered by AI
  • Q3. 3.Draw the iron iron carbide diagram
  • Ans. 

    The iron-iron carbide diagram shows the relationship between temperature, carbon content, and phases of steel.

    • The diagram is also known as the Fe-C diagram.

    • It is used to predict the microstructure of steel based on its composition and heat treatment.

    • The diagram consists of three regions: austenite, ferrite, and cementite.

    • The eutectoid point on the diagram represents the composition of steel that will transform complete...

  • Answered by AI
  • Q4. 4. Tell me about your self
  • Ans. 

    I am a motivated and ambitious individual with a strong academic background and a passion for learning.

    • Completed Bachelor's degree in Business Administration with honors

    • Interned at a leading marketing firm, gaining experience in market research and analysis

    • Volunteered at a local non-profit organization, developing strong communication and teamwork skills

    • Currently pursuing a Master's degree in Finance to further enhance

  • Answered by AI
  • Q5. 5.why do you want to join Bajaj
  • Ans. 

    I want to join Bajaj because of its strong reputation, diverse opportunities, and commitment to innovation.

    • Bajaj has a strong reputation in the industry for its quality products and customer service.

    • The company offers diverse opportunities for growth and development in various departments and functions.

    • Bajaj is known for its commitment to innovation and constantly strives to introduce new and advanced technologies.

    • I be...

  • Answered by AI
  • Q6. 6.why bajaj should hire you
  • Ans. 

    Bajaj should hire me because of my strong skills, relevant experience, and passion for the industry.

    • I have a proven track record of success in my previous roles.

    • I possess the necessary technical skills and knowledge required for the position.

    • I am a quick learner and adapt well to new environments.

    • I am highly motivated and have a strong work ethic.

    • I am passionate about the industry and have a genuine interest in contrib...

  • Answered by AI
  • Q7. 7. Tell us 5 problems that you have faced in collage and how do you overcome those
  • Ans. 

    I faced several problems in college and overcame them through determination and resourcefulness.

    • Time management: I struggled with balancing my coursework, extracurricular activities, and part-time job. I learned to prioritize tasks and create a schedule.

    • Academic pressure: I faced challenges in understanding complex subjects. I sought help from professors, joined study groups, and utilized online resources.

    • Financial con...

  • Answered by AI
  • Q8. 8. Which field do you prefer R&d or manufacturing
  • Ans. 

    I prefer R&D over manufacturing.

    • I enjoy the process of research and development, as it allows me to explore new ideas and innovate.

    • R&D offers the opportunity to work on cutting-edge technologies and contribute to advancements in the field.

    • I appreciate the creative and problem-solving aspects of R&D, where I can apply my analytical skills.

    • R&D also involves collaboration with experts from various disciplines, which enhan...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - First impression is the last impression ........it may sound cliche but it is true. When you got the question " tell me about yourself" that is the only time when you can bring there attention and turn the interview according to you ......do not stop telling about your achievements until they stop you because after that they will ask whatever they want and if you give something intersting to discuss in your tell me about yourself question than its good but if they did not get anything interesting from you they will ask the questions in their expertise and its possible that you are not an expert in the same field.

In the end
1. Be honest
2. Be confident even if you are lying and should have enough knowledge to back your lies
3. Stay talkative even if you do not know the answer completely
4. If any question is extremely way off of your knowledge simply agree that you don not know the answer
5. Have a simple smile on your face
6. Do not fickle, stay calm and compose.

Best of luck.

Skills evaluated in this interview

Interview questions from similar companies

Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
-
Result
No response

I applied via Campus Placement and was interviewed in Oct 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Quants,verbal,c++,sql,netwroking,logical

Round 3 - One-on-one 

(3 Questions)

  • Q1. Technical Questions
  • Q2. I am not selected ,so i don't know.
  • Q3. Resume based question
Interview experience
3
Average
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Not Selected

I was interviewed in Nov 2023.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Aptitude, simple core question

Round 3 - Group Discussion 

Technology impact on human being and unemployment rate

Round 4 - Technical 

(1 Question)

  • Q1. Resume based, if you done solid work, anys add in resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Luck and cgpa is matter
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jan 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Mechanical engineering, Aptitude, English

Round 2 - Technical 

(1 Question)

  • Q1. Resume and Application of final project
Round 3 - HR 

(1 Question)

  • Q1. Basic hr questions and about company
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Aptitude questions and Mechanical Engineering questions. If you pass it, there's a second round of psychometric questions.

Round 2 - One-on-one 

(3 Questions)

  • Q1. What's your darkest fantasy?
  • Q2. Valve timings and IC engine working
  • Q3. About internships and favourite subject.

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

I was interviewed in Jul 2017.

Interview Questionnaire 

1 Question

  • Q1. My skills

Interview Preparation Tips

Round: Resume Shortlist
Experience: My qualification experience and knowledge
Tips: Qc knowledge heavy whical maintenance experience

Round: Test
Experience: Technical questions
Tips: Technically
Duration: 1 hour
Total Questions: 30

Round: HR Interview
Experience: Check my skills
Tips: Skills test

Skills: Industrial Quality Control

Quality Engineer Interview Questions & Answers

TVS Motor user image bikash chandra Behera

posted on 17 Oct 2017

I was interviewed before Oct 2016.

Interview Questionnaire 

1 Question

  • Q1. Why are you want this job
  • Ans. 

    I am passionate about ensuring quality standards are met and enjoy problem-solving in a technical environment.

    • Passionate about quality assurance

    • Enjoy problem-solving in technical environments

    • Excited about contributing to the success of the company

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: Asking about my self. Then they asking some questions about lathe machine and dia
Tips: No

Round: HR Interview
Experience: They said about the company and salary and Benefits
Tips: No

Skills: Basic Knowledge
College Name: Gandhi academy of technology and engineering

I was interviewed before Jun 2016.

Interview Questionnaire 

3 Questions

  • Q1. What is the least count of vernier ?
  • Ans. 

    The least count of a vernier is the smallest measurement that can be read on the scale.

    • The least count is determined by the number of divisions on the main scale and the vernier scale.

    • It is calculated by dividing the smallest division on the main scale by the number of divisions on the vernier scale.

    • For example, if the smallest division on the main scale is 0.1 mm and the vernier scale has 10 divisions, the least count

  • Answered by AI
  • Q2. What are the different CNC codes?
  • Ans. 

    CNC codes are instructions used in computer numerical control (CNC) machines to control the movement and operation of tools.

    • G-codes: Control the movement and positioning of the machine

    • M-codes: Control auxiliary functions such as coolant or spindle speed

    • T-codes: Specify the tool to be used

    • F-code: Sets the feed rate

    • S-code: Sets the spindle speed

    • X, Y, Z-codes: Control the movement along the X, Y, and Z axes

  • Answered by AI
  • Q3. What is basic quality management for a company?
  • Ans. 

    Basic quality management for a company involves implementing processes and systems to ensure products or services meet customer expectations.

    • Establishing quality objectives and policies

    • Implementing quality control measures

    • Monitoring and measuring performance

    • Continuous improvement through feedback and corrective actions

    • Training employees on quality standards

    • Documenting and maintaining quality records

    • Conducting regular a

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: A good resume is the key to enter into the industry. It's the representative of your personality. I passed my resume through my friend who worked in the industry after dropout from Royal Enfield.
Tips: Make it short and presize taking your skills under consideration

Round: Test
Experience: I entered into the company with bunch of candidates applying for the post. It was good aptitude round with coding and decoding questions and english
Tips: Be sure about your answer
Duration: 45 minutes
Total Questions: 30

Round: Technical Interview
Experience: A panel was there to conduct the interview of HR, technical and executives.
Each candidate was called by their name to give the interview in a meeting room.
I entered the room pulled my chair sat on it.
They began with my basic qualities and asked the mentioned questions.
Tips: Be confident

I applied via Referral and was interviewed before Jan 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. My name is prem Singh

Interview Preparation Tips

Interview preparation tips for other job seekers - communication.
Dress for the job or company.
Listen
Contribute & help others!
anonymous
You can choose to be anonymous

KTM Interview FAQs

What are the top questions asked in KTM Graduate Trainee interview?

Some of the top questions asked at the KTM Graduate Trainee interview -

  1. 1. Tolerances of each and every machining proces...read more
  2. 2. Design a hydraulic breaking system with single master cylind...read more
  3. 3.Draw the iron iron carbide diag...read more

Recently Viewed

REVIEWS

Intas Pharmaceuticals

No Reviews

REVIEWS

Toyota Kirloskar Motor

No Reviews

REVIEWS

Intas Pharmaceuticals

No Reviews

REVIEWS

Intas Pharmaceuticals

No Reviews

REVIEWS

Intas Pharmaceuticals

No Reviews

REVIEWS

Intas Pharmaceuticals

No Reviews

COMPANY BENEFITS

Intas Pharmaceuticals

No Benefits

REVIEWS

Macleods Pharmaceuticals

No Reviews

REVIEWS

Toyota Kirloskar Motor

No Reviews

SALARIES

TVS Motor

Tell us how to improve this page.

BigBasket

We don't just offer jobs; we offer peace of mind.

Interview Questions from Similar Companies

Hero MotoCorp Interview Questions
4.1
 • 334 Interviews
TVS Motor Interview Questions
4.0
 • 313 Interviews
Bajaj Auto Interview Questions
3.9
 • 267 Interviews
Royal Enfield Interview Questions
4.2
 • 152 Interviews
Sonalika Tractors Interview Questions
3.6
 • 129 Interviews
Force Motors Interview Questions
3.6
 • 117 Interviews
Sasken Interview Questions
3.8
 • 79 Interviews
Yamaha Motor Interview Questions
4.1
 • 65 Interviews
View all
Sales Executive
31 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Showroom Manager
12 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Area Sales Manager
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Sales Manager
9 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Service Advisor
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare KTM with

Bajaj Auto

3.9
Compare

TVS Motor

4.0
Compare

Hero MotoCorp

4.1
Compare

Royal Enfield

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview