Upload Button Icon Add office photos

Koyo Bearings India

Compare button icon Compare button icon Compare

Filter interviews by

Koyo Bearings India Interview Questions, Process, and Tips

Updated 14 Jan 2025

Top Koyo Bearings India Interview Questions and Answers

Koyo Bearings India Interview Experiences

Popular Designations

6 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Aptitude Test 

Basce Queastion of queality dipartment & other knowledge

Round 3 - HR 

(2 Questions)

  • Q1. Last company profile & His like why
  • Q2. New company advantage & coustmer

Interview Preparation Tips

Interview preparation tips for other job seekers - MNC company found
Safety is better
Technical knowledge

Diploma Trainee Engineer Interview Questions asked at other Companies

Q1. Wich of the following laws states that: in any electrical network the algebraic sum of the current meeting at a poin is zero ?
View answer (9)
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Jan 2024. There were 2 interview rounds.

Round 1 - HR 

(3 Questions)

  • Q1. HR directly took interview and asked some simple questions
  • Q2. Types of engine differences between them
  • Q3. Advanced technology being used in automobiles
Round 2 - HR 

(2 Questions)

  • Q1. Difference between diesel and petrol engine
  • Q2. 5 advance systems being used in modern vehicles

Interview Preparation Tips

Interview preparation tips for other job seekers - Take it easy, just be confident

Diploma Trainee Engineer Interview Questions asked at other Companies

Q1. Wich of the following laws states that: in any electrical network the algebraic sum of the current meeting at a poin is zero ?
View answer (9)

Production Interview Questions & Answers

user image Anonymous

posted on 27 Jun 2022

I applied via Company Website and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Physics, chemistry, question Formula, units etc.
  • Q2. Formula, units etc. Physics, chemistry,

Interview Preparation Tips

Topics to prepare for Koyo Bearings India Production interview:
  • Physics
  • Chemistry
Interview preparation tips for other job seekers - Units, formula etc. (N2,O2,H2O. F2 etc.)

Production Interview Questions asked at other Companies

Q1. How could you define tablets and attribute all the qualities of tablets in single defination either be in hindi or english
View answer (5)
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Walk-in and was interviewed before May 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. Personality viva
  • Q2. Gk test in writing
Round 3 - Technical 

(2 Questions)

  • Q1. But joint diagram
  • Q2. Forms of fluid ?
  • Ans. 

    Fluids can exist in various forms such as liquids, gases, and plasmas.

    • Fluids can be classified as liquids, gases, and plasmas.

    • Liquids have a definite volume but no definite shape, gases have neither definite volume nor shape, and plasmas are ionized gases.

    • Examples of liquids include water, oil, and blood, while examples of gases include air, helium, and carbon dioxide.

    • Plasmas are found in lightning, stars, and some typ

  • Answered by AI
Round 4 - Case Study 

Just background of family and communication skill check-up

Production Planning Control Engineer Interview Questions asked at other Companies

Q1. vendor followups and how planning done when schedule not met
View answer (1)

Koyo Bearings India interview questions for popular designations

 Diploma Trainee Engineer

 (2)

 Production

 (1)

 Production Manager

 (1)

 Production Planning Control Engineer

 (1)

Interview Questions & Answers

user image Anonymous

posted on 27 Sep 2021

Interview Questionnaire 

3 Questions

  • Q1. What is the meaning of resume?
  • Q2. What is the full form of psi?
  • Q3. What is the gear module?

Interview Preparation Tips

Interview preparation tips for other job seekers - My interview was mostly technically and Some Nontechnical. Luckily I was able to answer most of questions correctly. You need to stay calm and should apply presence of mind.

I applied via Recruitment Consulltant and was interviewed before Jul 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - One-on-one 

(4 Questions)

  • Q1. Introduce yourself with your current job profile
  • Q2. Questions about Bearing process
  • Q3. Your achievements and strengths and weaknesses
  • Q4. How to diagnose a problem
  • Ans. 

    Diagnosing a problem involves identifying the symptoms, analyzing the cause, and finding a solution.

    • Identify the symptoms of the problem

    • Analyze the cause of the problem

    • Find a solution to the problem

    • Use data and information to aid in diagnosis

    • Consult with experts or colleagues if necessary

  • Answered by AI
Round 3 - HR 

(3 Questions)

  • Q1. Reason of change job
  • Q2. How much expected salary
  • Q3. How much notice period
Round 4 - Japanese person will take final 

(3 Questions)

  • Q1. Àbout job Profile question
  • Q2. TPM related questions
  • Q3. About Kaizen and Quality circles

Interview Preparation Tips

Topics to prepare for Koyo Bearings India Production Manager interview:
  • Grinding process
  • Induction Hardening
  • Turning
  • VMC
  • Lean manufacturing
  • TPM
  • Bearings
  • Kanban
  • 5s
  • 3M
Interview preparation tips for other job seekers - Don't be oversmart.
If you don't know simply deny

Production Manager Interview Questions asked at other Companies

Q1. Production, Maintenance, Quality and Safety. Out of four, tell me the most important and least important thing for you and why?
View answer (10)

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Mathematical type questions
No hard interview.

Round 3 - Technical 

(5 Questions)

  • Q1. What is petrol engine
  • Ans. 

    A petrol engine is an internal combustion engine that uses petrol as fuel to power the vehicle.

    • Petrol engines are commonly used in cars, motorcycles, and small aircraft.

    • They work by compressing a mixture of petrol and air in a cylinder, which is then ignited by a spark plug.

    • The resulting explosion pushes a piston, which turns a crankshaft and powers the vehicle.

    • Petrol engines are known for their high power output and q...

  • Answered by AI
  • Q2. Please explain the first and second law Thermodynamics
  • Ans. 

    First law of thermodynamics states that energy cannot be created or destroyed, only transferred or converted. Second law states that entropy of an isolated system always increases over time.

    • First law is also known as law of conservation of energy

    • Second law explains why heat flows from hot to cold objects

    • Second law also states that no engine can be 100% efficient

    • Entropy is a measure of disorder in a system

    • Both laws are ...

  • Answered by AI
  • Q3. What is unit of pressure
  • Ans. 

    The unit of pressure is Pascal (Pa)

    • Pressure is defined as force per unit area

    • The SI unit of force is Newton (N) and area is square meter (m²)

    • 1 Pascal is equal to 1 Newton per square meter (N/m²)

    • Other common units of pressure include atmosphere (atm), bar (bar), and pounds per square inch (psi)

  • Answered by AI
  • Q4. Different between two stroke and four stroke engine
  • Ans. 

    Two stroke engines have one power stroke per revolution while four stroke engines have one power stroke every two revolutions.

    • Two stroke engines have a simpler design and are lighter than four stroke engines.

    • Four stroke engines are more fuel efficient and produce less emissions than two stroke engines.

    • Two stroke engines are commonly used in small power tools and motorcycles while four stroke engines are used in cars an...

  • Answered by AI
  • Q5. What is micrometres and snapmetre value
  • Ans. 

    Micrometre is a unit of measurement for length, while snap gauge is a tool used to measure the thickness or diameter of an object.

    • Micrometre is also known as a micron and is equal to one-millionth of a meter.

    • Snap gauge is used in manufacturing to ensure the accuracy of machined parts.

    • Snap gauge can be used to measure the thickness of paper, the diameter of a wire, or the width of a gap.

    • Both micrometre and snap gauge ar...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Rane NSK Steering Systems Diploma Trainee Engineer interview:
  • Thermodynamics
  • Production
Interview preparation tips for other job seekers - My suggestion for all job seekers
Aap log achhe se technical ki preparation kr ke jao
Best of luck friends
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Great very interesting and nice quality of questions

Round 2 - One-on-one 

(5 Questions)

  • Q1. Defination of leadership
  • Q2. Defination of excellence
  • Ans. 

    Excellence is the quality of being outstanding or extremely good in a particular field or endeavor.

    • Excellence involves consistently surpassing expectations and striving for the highest standards.

    • It requires dedication, hard work, and continuous improvement.

    • Examples of excellence include achieving top grades in academics, winning prestigious awards, or delivering exceptional performance at work.

  • Answered by AI
  • Q3. Defination of Design
  • Ans. 

    Design is the process of creating a plan or drawing for the construction of something.

    • Design involves creating a detailed plan or blueprint for a product, system, or structure

    • It includes considering functionality, aesthetics, materials, and cost

    • Design can be done using software tools like AutoCAD or SolidWorks

    • Examples of design include architectural plans, product prototypes, and graphic layouts

  • Answered by AI
  • Q4. What is the role of line leader
  • Ans. 

    A line leader is responsible for overseeing a specific production line or team of workers to ensure efficiency and quality.

    • Supervising and coordinating the activities of workers on the production line

    • Ensuring that production targets are met within the specified time frame

    • Monitoring the quality of products being produced and addressing any issues that arise

    • Training new employees on the production processes and safety pr...

  • Answered by AI
  • Q5. What is the minimum limit of vernier caliper
  • Ans. 

    The minimum limit of a vernier caliper is the smallest measurement it can accurately measure.

    • The minimum limit of a vernier caliper is typically 0.02 mm or 0.001 inches.

    • This means that the vernier caliper can accurately measure up to 0.02 mm or 0.001 inches.

    • Any measurement smaller than the minimum limit may not be accurate or reliable.

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Self introduction, Personalty test
Round 3 - Technical 

(2 Questions)

  • Q1. Thermodynamics laws, Type of Gears And Bearings
  • Ans. 

    Thermodynamics laws, types of gears and bearings

    • Thermodynamics laws include the first law (conservation of energy), second law (entropy always increases), and third law (absolute zero is unattainable)

    • Types of gears include spur, helical, bevel, worm, and rack and pinion

    • Types of bearings include ball bearings, roller bearings, and plain bearings

    • Gears and bearings are commonly used in machinery and mechanical systems

  • Answered by AI
  • Q2. Measurement, Heat treatment,

I applied via Walk-in and was interviewed before Jun 2019. There was 1 interview round.

Interview Questionnaire 

3 Questions

  • Q1. Family's background
  • Ans. 

    My family has a diverse background with members involved in various professions and industries.

    • My father is a doctor and my mother is a teacher.

    • My older brother is an engineer and my younger sister is studying to become a lawyer.

    • We have relatives who are business owners, artists, and government employees.

    • Our family values education and encourages pursuing different career paths.

  • Answered by AI
  • Q2. Technical discussion
  • Q3. About Qualifications

Interview Preparation Tips

Interview preparation tips for other job seekers - Always do work in seriously and confidently

Koyo Bearings India Interview FAQs

How many rounds are there in Koyo Bearings India interview?
Koyo Bearings India interview process usually has 3 rounds. The most common rounds in the Koyo Bearings India interview process are HR, Resume Shortlist and One-on-one Round.
What are the top questions asked in Koyo Bearings India interview?

Some of the top questions asked at the Koyo Bearings India interview -

  1. How to diagnose a prob...read more
  2. What is the meaning of resum...read more
  3. What is the full form of ps...read more

Tell us how to improve this page.

Koyo Bearings India Interview Process

based on 6 interviews

Interview experience

4.7
  
Excellent
View more

Interview Questions from Similar Companies

NBC Bearings Interview Questions
3.9
 • 83 Interviews
Delphi TVS Interview Questions
3.9
 • 83 Interviews
SKF Interview Questions
4.0
 • 64 Interviews
Timken Interview Questions
3.9
 • 46 Interviews
NRB Bearings Interview Questions
4.1
 • 40 Interviews
NSK Interview Questions
3.6
 • 7 Interviews
View all

Koyo Bearings India Reviews and Ratings

based on 226 reviews

4.1/5

Rating in categories

3.9

Skill development

3.7

Work-life balance

3.7

Salary

4.1

Job security

3.8

Company culture

3.5

Promotions

3.6

Work satisfaction

Explore 226 Reviews and Ratings
Diploma Trainee Engineer
221 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
86 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Team Associate
64 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
24 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

DET
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Koyo Bearings India with

SKF

4.0
Compare

Timken

3.9
Compare

Schaeffler India

4.2
Compare

NSK

3.6
Compare
Did you find this page helpful?
Yes No
write
Share an Interview