i
JSW Steel
Filter interviews by
Reasoning,math& general science
The unit of charge is Coulomb (C).
The unit of charge is named after the French physicist Charles-Augustin de Coulomb.
One Coulomb is equal to the charge of approximately 6.242 x 10^18 protons or electrons.
Charge is a fundamental property of matter and can be positive or negative.
Transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction.
Transformers can increase or decrease voltage levels in electrical circuits.
They are commonly used in power distribution systems to step up voltage for long-distance transmission and step down voltage for consumer use.
Examples of transformers include power transformers, distribution transformers, and
The motor with the highest starting torque is the DC series motor.
DC series motor has the highest starting torque among all types of motors.
This is because the field winding and armature winding are connected in series, allowing for high starting torque.
Examples of applications where high starting torque is required include electric trains and elevators.
Kirchhoff's laws are fundamental principles in electrical engineering that describe the conservation of charge and energy in electrical circuits.
Kirchhoff's Current Law (KCL) states that the total current entering a junction in a circuit must equal the total current leaving the junction.
Kirchhoff's Voltage Law (KVL) states that the sum of the voltage drops around any closed loop in a circuit must equal the sum of the v...
I applied via Job Fair and was interviewed before Nov 2023. There was 1 interview round.
I applied via Campus Placement and was interviewed in Feb 2022. There were 4 interview rounds.
There were number of general knowledge and aptitude questions and had solve in given time.
We had to discuss about the topic given by interviewer.
Power factor can be improved by using capacitors, reducing reactive power, and improving system design.
Installing power factor correction capacitors can reduce reactive power and improve power factor.
Reducing the use of inductive loads and increasing the use of capacitive loads can improve power factor.
Improving system design by minimizing voltage drops, using efficient transformers, and properly sizing conductors can ...
Renewable sources of energy are natural resources that can be replenished and are not depleted with use.
Solar energy: harnessing the power of the sun through solar panels
Wind energy: converting wind into electricity using wind turbines
Hydroelectric power: generating electricity from flowing or falling water
Geothermal energy: utilizing heat from the Earth's core
Biomass energy: converting organic matter into fuel
Tidal en...
Electrical engineering focuses on power generation and distribution, while electronics engineering deals with electronic devices and circuits.
Electrical engineering deals with large-scale power systems, such as power plants and electrical grids.
Electronics engineering focuses on small-scale electronic devices, such as computers, smartphones, and microchips.
Electrical engineering involves the study of power generation, ...
Conductors, semiconductors, and insulators are materials that differ in their ability to conduct electricity.
Conductors have high electrical conductivity and allow the flow of electric current easily.
Semiconductors have moderate electrical conductivity, which can be controlled by adding impurities or applying voltage.
Insulators have very low electrical conductivity and do not allow the flow of electric current.
Conducto...
There are two types of temperature coefficient: positive and negative.
Positive temperature coefficient (PTC) - resistance increases with temperature
Negative temperature coefficient (NTC) - resistance decreases with temperature
PTC is used in thermistors for overcurrent protection
NTC is used in temperature sensors for temperature measurement
I am a Junior Engineer Trainee with a strong passion for problem-solving and learning new technologies.
I recently graduated with a degree in Engineering and have a solid foundation in technical concepts.
During my studies, I completed several projects that involved designing and implementing solutions.
I am proficient in programming languages such as Java and C++, and have experience with software development tools.
I am ...
I want this job because it aligns with my passion for engineering and offers opportunities for growth and learning.
Passion for engineering
Opportunities for growth and learning
Alignment with career goals
Interest in the company's projects and technologies
I should be hired because of my strong technical skills, eagerness to learn, and ability to work well in a team.
I have a solid foundation in engineering principles and have excelled in my academic coursework.
I am a quick learner and have a strong desire to continuously improve my skills.
I am a team player and have successfully collaborated with others on various projects.
I am highly motivated and have a strong work eth...
I was interviewed before Jan 2021.
Diploma
posted on 18 May 2020
I applied via Naukri.com and was interviewed in Nov 2019. There were 3 interview rounds.
Control valve calibration involves adjusting the valve to ensure it operates within specified parameters.
Determine the valve's operating range and desired set points
Use a calibration bench or in-line calibration equipment to adjust the valve's position and response time
Verify the valve's performance using a flow meter or pressure gauge
Document the calibration process and results for future reference
I applied via Company Website and was interviewed in Mar 2022. There were 3 interview rounds.
One example of learning from failure is failing to meet a project deadline and using that experience to better estimate future timelines.
Reflect on what went wrong and why
Identify areas for improvement
Develop a plan to address those areas
Apply the lessons learned to future projects
Communicate the lessons learned to team members
Example: Failing to deliver a project on time due to poor communication with stakeholders. Th...
I will prioritize tasks, delegate when necessary, and communicate with my team to ensure efficient workload management.
Create a to-do list and prioritize tasks based on urgency and importance
Delegate tasks to team members based on their strengths and workload
Communicate with team members to ensure everyone is on the same page and workload is evenly distributed
Take breaks and practice self-care to avoid burnout
posted on 23 Dec 2024
I applied via Naukri.com and was interviewed in Jun 2024. There were 2 interview rounds.
I have 8 years of experience in field surveying.
I have 8 years of experience in conducting field surveys for various projects.
I am proficient in using surveying equipment such as total stations and GPS devices.
I have experience in analyzing survey data and creating detailed reports.
I have worked on projects ranging from land development to infrastructure construction.
Yes, I have knowledge in DGPS and Total Station.
I have experience using DGPS for precise positioning in surveying and mapping.
I am familiar with Total Station equipment for measuring angles and distances in surveying.
I have used both DGPS and Total Station in various engineering projects.
I am proficient in data collection and analysis using DGPS and Total Station technology.
My current CTC per month is $10,000 and per year is $120,000.
Current CTC per month: $10,000
Current CTC per year: $120,000
Topography survey is a detailed mapping of the natural and man-made features of a piece of land.
Topography survey involves measuring and mapping the elevation, contours, and features of a land area.
It helps in understanding the terrain, drainage patterns, and existing structures on the land.
Topography surveys are essential for construction projects, land development, and environmental assessments.
Surveyors use speciali...
RL stands for Reinforcement Learning, a type of machine learning where an agent learns to make decisions by interacting with an environment.
RL involves an agent learning to take actions in an environment to maximize some notion of cumulative reward.
It is based on the idea of trial and error learning, where the agent learns from the consequences of its actions.
Examples of RL algorithms include Q-Learning, Deep Q Network
A KMZ file is a compressed version of a KML file used for displaying geographic data in Google Earth.
Create or download a KML file with geographic data
Compress the KML file using a tool like 7-Zip or WinZip
Change the file extension from .zip to .kmz
Open the KMZ file in Google Earth to view the geographic data
The Traverse is a method used in surveying and navigation to move through an area by taking a series of connected measurements and directions.
Traverse involves measuring distances and angles between points to create a connected path.
It is commonly used in land surveying, construction, and navigation.
Traverse can be closed or open depending on whether it returns to the starting point.
Example: A land surveyor uses a trav
Error distribution in a point can be achieved by considering the uncertainty in measurements and applying statistical methods.
Consider the uncertainty in measurements to determine the range of possible values for the point.
Apply statistical methods such as standard deviation to distribute the error around the point.
Use error propagation techniques to calculate the overall error in the point based on the errors in indiv
Total Station is a surveying instrument used for measuring angles and distances to accurately layout areas.
Set up the Total Station at a known point with a clear line of sight to the area to be surveyed.
Calibrate the instrument by leveling it and inputting the necessary parameters such as height and angle.
Measure distances and angles to various points in the area to create a detailed map or layout.
Use the data collecte...
I have 8 years of experience in Total Station, Auto level, Digital level, Theodolite, and Digital Theodolite.
8 years experience in Total Station, Auto level, Digital level, Theodolite, and Digital Theodolite.
Proficient in using all mentioned surveying instruments.
Experience in conducting precise measurements for various projects.
Skilled in data collection and analysis using these instruments.
Dumpy level, auto level, and digital level are all types of surveying instruments used for measuring horizontal and vertical levels.
Dumpy level is a basic surveying instrument with a telescope and bubble level for measuring horizontal and vertical angles.
Auto level is a more advanced version of a dumpy level that automatically adjusts the line of sight to be horizontal.
Digital level is a modern surveying instrument tha...
I applied via Walk-in and was interviewed in Jul 2022. There were 2 interview rounds.
Good working good thinking best work is worhship.
I applied via Walk-in and was interviewed in Jun 2021. There was 1 interview round.
based on 2 interviews
Interview experience
based on 1 review
Rating in categories
Assistant Manager
3.1k
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
2.2k
salaries
| ₹0 L/yr - ₹0 L/yr |
Deputy Manager
1.7k
salaries
| ₹0 L/yr - ₹0 L/yr |
Manager
1.1k
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
992
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Steel
Steel Authority Of India
Vedanta Limited
ArcelorMittal Nippon Steel