Add office photos
i
Johnson Controls
Compare
Filter interviews by
Johnson Controls BMS Engineer Interview Questions and Answers
Johnson Controls BMS Engineer Interview Experiences
1 interview found
Anonymous
I applied via Recruitment Consultant and was interviewed in Dec 2020. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. 1.Tell about yourself?2.why you are looking job in india? 3.Remaining all the questions based on the experience?
- Q2. Technical & experience based questions...
- Q3. What you mentioned in resume .the questions also from cv?
Interview Preparation Tips
improve your skills..
Interview questions from similar companies
I applied via Recruitment Consulltant and was interviewed in Sep 2024. There was 1 interview round.
(3 Questions)
- Q1. How does chiller operate
- Ans.
A chiller operates by removing heat from a liquid through a refrigeration cycle and then transferring that heat to the air outside.
Chiller absorbs heat from a liquid coolant, typically water or a mixture of water and glycol.
The absorbed heat is transferred to the refrigerant in the evaporator, causing it to evaporate and absorb more heat.
The refrigerant is then compressed, raising its temperature and pressure, before b...
- Q2. What is the protocol used in bMS and what is the buadrate
- Ans.
BMS uses BACnet protocol and the baud rate can vary depending on the system.
BMS typically uses the BACnet protocol for communication
The baud rate in BMS systems can vary depending on the specific system and requirements
Common baud rates for BMS systems include 9600, 19200, and 38400
- Q3. Difference between PLC and DDC
- Ans.
PLC is a programmable logic controller used for industrial automation, while DDC is a direct digital control system used for building automation.
PLC is typically used in industrial settings to control machinery and processes.
DDC is commonly used in building automation systems to control HVAC, lighting, and other building systems.
PLC programming is usually ladder logic or function block diagram, while DDC programming is...
Skills evaluated in this interview
I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.
(2 Questions)
- Q1. How will you configure automation server at first
- Ans.
To configure an automation server, start by determining the requirements, selecting appropriate hardware and software, setting up communication protocols, creating user accounts, and testing the system.
Determine the requirements for the automation server based on the building's systems and needs
Select appropriate hardware such as controllers, sensors, and actuators
Choose suitable software for programming and monitoring...
- Q2. How many controllers we can add into one automation server
- Ans.
The number of controllers that can be added to an automation server depends on the capacity and specifications of the server.
The number of controllers that can be added to an automation server varies depending on the manufacturer and model of the server.
Some automation servers can support a few controllers, while others can support dozens or even hundreds.
It is important to check the specifications of the automation se...
Interview Preparation Tips
- HVAC System
Skills evaluated in this interview
BMS Engineer Interview Questions & Answers
Honeywell Automation
Himanshu Kumar
posted on 10 Dec 2020
I applied via Company Website and was interviewed in Nov 2020. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. What ia access control.please explain all point related to access control
- Q2. What is Fire Alarm System.explain working and commesning.
- Ans.
A fire alarm system is a network of devices that detect and alert people to the presence of fire.
Fire alarm systems consist of smoke detectors, heat detectors, and manual pull stations.
When a detector senses smoke or heat, it sends a signal to the control panel.
The control panel then activates the alarm and alerts the monitoring station or fire department.
Commissioning involves testing the system to ensure it is functi...
- Q3. What is cctv.
- Ans.
CCTV stands for Closed Circuit Television. It is a system of video cameras used for surveillance and security purposes.
CCTV is a video surveillance system used for monitoring and recording activities in a specific area.
It consists of cameras, monitors, and recording devices.
CCTV is commonly used for security purposes in public places like banks, airports, and shopping malls.
It can also be used for traffic monitoring, w...
- Q4. What is EBI.
- Ans.
EBI stands for Enterprise Building Integrator, a building automation system used for controlling and monitoring building systems.
EBI is a software platform developed by Honeywell.
It integrates various building systems such as HVAC, lighting, security, and fire safety.
EBI provides real-time monitoring, control, and automation of building systems.
It helps in reducing energy consumption and improving building efficiency.
E...
Interview Preparation Tips
I applied via Recruitment Consulltant and was interviewed in Sep 2024. There was 1 interview round.
(3 Questions)
- Q1. How does chiller operate
- Ans.
A chiller operates by removing heat from a liquid through a refrigeration cycle and then transferring that heat to the air outside.
Chiller absorbs heat from a liquid coolant, typically water or a mixture of water and glycol.
The absorbed heat is transferred to the refrigerant in the evaporator, causing it to evaporate and absorb more heat.
The refrigerant is then compressed, raising its temperature and pressure, before b...
- Q2. What is the protocol used in bMS and what is the buadrate
- Ans.
BMS uses BACnet protocol and the baud rate can vary depending on the system.
BMS typically uses the BACnet protocol for communication
The baud rate in BMS systems can vary depending on the specific system and requirements
Common baud rates for BMS systems include 9600, 19200, and 38400
- Q3. Difference between PLC and DDC
- Ans.
PLC is a programmable logic controller used for industrial automation, while DDC is a direct digital control system used for building automation.
PLC is typically used in industrial settings to control machinery and processes.
DDC is commonly used in building automation systems to control HVAC, lighting, and other building systems.
PLC programming is usually ladder logic or function block diagram, while DDC programming is...
Skills evaluated in this interview
I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.
(2 Questions)
- Q1. How will you configure automation server at first
- Ans.
To configure an automation server, start by determining the requirements, selecting appropriate hardware and software, setting up communication protocols, creating user accounts, and testing the system.
Determine the requirements for the automation server based on the building's systems and needs
Select appropriate hardware such as controllers, sensors, and actuators
Choose suitable software for programming and monitoring...
- Q2. How many controllers we can add into one automation server
- Ans.
The number of controllers that can be added to an automation server depends on the capacity and specifications of the server.
The number of controllers that can be added to an automation server varies depending on the manufacturer and model of the server.
Some automation servers can support a few controllers, while others can support dozens or even hundreds.
It is important to check the specifications of the automation se...
Interview Preparation Tips
- HVAC System
Skills evaluated in this interview
BMS Engineer Interview Questions & Answers
Honeywell Automation
Himanshu Kumar
posted on 10 Dec 2020
I applied via Company Website and was interviewed in Nov 2020. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. What ia access control.please explain all point related to access control
- Q2. What is Fire Alarm System.explain working and commesning.
- Ans.
A fire alarm system is a network of devices that detect and alert people to the presence of fire.
Fire alarm systems consist of smoke detectors, heat detectors, and manual pull stations.
When a detector senses smoke or heat, it sends a signal to the control panel.
The control panel then activates the alarm and alerts the monitoring station or fire department.
Commissioning involves testing the system to ensure it is functi...
- Q3. What is cctv.
- Ans.
CCTV stands for Closed Circuit Television. It is a system of video cameras used for surveillance and security purposes.
CCTV is a video surveillance system used for monitoring and recording activities in a specific area.
It consists of cameras, monitors, and recording devices.
CCTV is commonly used for security purposes in public places like banks, airports, and shopping malls.
It can also be used for traffic monitoring, w...
- Q4. What is EBI.
- Ans.
EBI stands for Enterprise Building Integrator, a building automation system used for controlling and monitoring building systems.
EBI is a software platform developed by Honeywell.
It integrates various building systems such as HVAC, lighting, security, and fire safety.
EBI provides real-time monitoring, control, and automation of building systems.
It helps in reducing energy consumption and improving building efficiency.
E...
Interview Preparation Tips
Tell us how to improve this page.
Johnson Controls Interviews By Designations
- Johnson Controls Graduate Engineer Trainee (Get) Interview Questions
- Johnson Controls Assistant Manager Interview Questions
- Johnson Controls Applications Engineer Interview Questions
- Johnson Controls Deputy Manager Interview Questions
- Johnson Controls Software Engineer Interview Questions
- Johnson Controls Analyst Interview Questions
- Johnson Controls Manager Interview Questions
- Johnson Controls Senior Design Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- BMS Operator Interview Questions
- BMS Executive Interview Questions
- Bms Team Lead Interview Questions
- Software Engineer Interview Questions
- Billing Engineer Interview Questions
- Senior Software Engineer Interview Questions
- Big Data Engineer Interview Questions
- Senior Engineer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Fast track your campus placements
Johnson Controls BMS Engineer Reviews and Ratings
based on 6 reviews
Rating in categories
|
Assistant Manager
1.2k
salaries
|  ₹4.5 L/yr - ₹12 L/yr |
|
Senior Executive
1.1k
salaries
| ₹3 L/yr - ₹9.5 L/yr |
|
Deputy Manager
631
salaries
| ₹6.8 L/yr - ₹12.6 L/yr |
|
Manager
348
salaries
| ₹6.9 L/yr - ₹18 L/yr |
|
Applications Engineer
344
salaries
| ₹3.5 L/yr - ₹11 L/yr |
Siemens
Honeywell Automation
Schneider Electric
ABB
Calculate your in-hand salary
- Home >
- Interviews >
- Johnson Controls Interview Questions >
- Johnson Controls BMS Engineer Interview Questions
