Upload Button Icon Add office photos

Filter interviews by

John Crane Sealing Systems India Project Engineer Interview Questions and Answers

Updated 23 Feb 2024

John Crane Sealing Systems India Project Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Feb 2023. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. 1.Tell me about yourself 2. What is onshore and offshore 3. Material certificates 4. What are mechanical seals 5. Piping plans 6. ASME ANSI CODES
Round 2 - Technical 

(2 Questions)

  • Q1. API 682 OH VS BB
  • Ans. 

    API 682 OH VS BB refers to the two types of mechanical seals specified by API 682 standard for pumps in oil and gas industry.

    • API 682 standard specifies two types of mechanical seals - OH (Outside Hung) and BB (Back to Back).

    • OH seals have the seal faces mounted outside the seal chamber, while BB seals have the seal faces mounted back to back within the seal chamber.

    • OH seals are typically used for clean fluids, while BB ...

  • Answered by AI
  • Q2. Centrifugal pump types
  • Ans. 

    Centrifugal pumps are used to transport fluids by converting rotational kinetic energy into hydrodynamic energy.

    • Centrifugal pumps are classified based on the number of impellers they have, such as single-stage and multi-stage pumps.

    • Other types include vertical, horizontal, submersible, and self-priming centrifugal pumps.

    • Centrifugal pumps can also be categorized based on the design of the impeller, such as open, semi-op

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Salary expectation
  • Q2. Why do you want to join us

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tell me something about your self??
  • Q2. What is your daily work management???
Round 3 - HR 

(1 Question)

  • Q1. Why are you want to change company??

Interview Preparation Tips

Interview preparation tips for other job seekers - If you have expain DWM properly and Position in organization chart then your selection is confirm.

I applied via Campus Placement and was interviewed in Aug 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Mostly from fluid mechanics

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while answering the questions
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Tell me about yourself
  • Ans. 

    I am a Senior Engineer with 10+ years of experience in software development, specializing in backend systems and database management.

    • 10+ years of experience in software development

    • Specialize in backend systems and database management

    • Strong problem-solving skills

    • Experience with various programming languages such as Java, Python, and SQL

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Interview on basis things on mechanical and electrical and hydraulic things
Round 3 - Interview with NSH and team 

(1 Question)

  • Q1. Asking the troubleshooting of previous attended complaints
Round 4 - HR 

(1 Question)

  • Q1. Asking current company CTc and sent breakup salary
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Sep 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is a resistor?
  • Ans. 

    A resistor is an electronic component that resists the flow of electrical current.

    • Resistors are used to control the amount of current flowing in a circuit.

    • They are measured in ohms (Ω) and have color-coded bands to indicate their resistance value.

    • Resistors dissipate energy in the form of heat when current flows through them.

    • Common types of resistors include carbon film, metal film, and wirewound resistors.

  • Answered by AI
  • Q2. What is a transistor?
  • Ans. 

    A transistor is a semiconductor device used to amplify or switch electronic signals.

    • Transistors are fundamental building blocks of modern electronic devices.

    • They can amplify electrical signals, control the flow of current, and act as switches.

    • Common types of transistors include bipolar junction transistors (BJTs) and field-effect transistors (FETs).

  • Answered by AI
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview before Feb 2024.

Round 1 - One-on-one 

(1 Question)

  • Q1. They just done F2F along with tool test
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Previous company details
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Tell me about your work experience
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Sep 2024, where I was asked the following questions.

  • Q1. Why we hire you?
  • Q2. What is current CTC

John Crane Sealing Systems India Interview FAQs

How many rounds are there in John Crane Sealing Systems India Project Engineer interview?
John Crane Sealing Systems India interview process usually has 3 rounds. The most common rounds in the John Crane Sealing Systems India interview process are Technical and HR.
How to prepare for John Crane Sealing Systems India Project Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at John Crane Sealing Systems India. The most common topics and skills that interviewers at John Crane Sealing Systems India expect are Customer Service, Petrochemical, Petroleum, Pumps and Medical Devices.
What are the top questions asked in John Crane Sealing Systems India Project Engineer interview?

Some of the top questions asked at the John Crane Sealing Systems India Project Engineer interview -

  1. Centrifugal pump ty...read more
  2. API 682 OH VS...read more

Tell us how to improve this page.

John Crane Sealing Systems India Project Engineer Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more
John Crane Sealing Systems India Project Engineer Salary
based on 29 salaries
₹4.5 L/yr - ₹8.7 L/yr
23% more than the average Project Engineer Salary in India
View more details

John Crane Sealing Systems India Project Engineer Reviews and Ratings

based on 9 reviews

3.5/5

Rating in categories

2.5

Skill development

3.9

Work-life balance

2.0

Salary

4.2

Job security

3.5

Company culture

1.9

Promotions

3.1

Work satisfaction

Explore 9 Reviews and Ratings
Design Engineer
151 salaries
unlock blur

₹3 L/yr - ₹8.4 L/yr

Master Data Associate
46 salaries
unlock blur

₹3.4 L/yr - ₹7 L/yr

Mechanical Engg. Design
29 salaries
unlock blur

₹2.5 L/yr - ₹9.3 L/yr

Project Engineer
29 salaries
unlock blur

₹4.5 L/yr - ₹8.7 L/yr

Associate Engineer
24 salaries
unlock blur

₹2.9 L/yr - ₹5.5 L/yr

Explore more salaries
Compare John Crane Sealing Systems India with

TÜV SÜD

3.9
Compare

Timken

4.0
Compare

EMERSON PROCESS MANAGEMENT

4.0
Compare

Danfoss Industries

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview