Upload Button Icon Add office photos

Filter interviews by

JCB Engineer Trainee Interview Questions and Answers

Updated 10 Oct 2021

JCB Engineer Trainee Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed before Aug 2020. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Welding types
  • Q2. What is 7 QC tool
  • Ans. 

    7 QC tools are a set of basic quality control tools used to identify and solve quality problems.

    • The tools include: Pareto chart, cause-and-effect diagram, check sheet, histogram, scatter diagram, control chart, and flowchart.

    • They are used to analyze data, identify problems, and develop solutions.

    • For example, a Pareto chart can be used to identify the most common causes of defects, while a control chart can be used to m...

  • Answered by AI
  • Q3. What if difference bet QA & QC
  • Ans. 

    QA focuses on preventing defects while QC focuses on identifying and correcting defects.

    • QA involves the process of ensuring that the product meets the specified requirements and standards.

    • QC involves the process of identifying defects in the product and correcting them.

    • QA is a proactive approach while QC is a reactive approach.

    • QA is a preventive measure while QC is a corrective measure.

    • Example of QA: Reviewing requirem...

  • Answered by AI
  • Q4. What is diffect in welding
  • Ans. 

    Defects in welding refer to imperfections or flaws that occur during the welding process.

    • Common welding defects include porosity, undercutting, incomplete fusion, and cracks.

    • Porosity is caused by gas pockets trapped in the weld, while undercutting occurs when the base metal is melted away.

    • Incomplete fusion happens when the weld metal doesn't fuse properly with the base metal, and cracks can occur due to excessive heat ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Study in welding related mostly and then quality related material for fabrication unit

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Past experience and communication skills

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

Interview Questionnaire 

1 Question

  • Q1. What is name mangling?
  • Ans. 

    Name mangling is a technique used by compilers to give unique names to functions and variables to avoid naming conflicts.

    • Name mangling is used in C++ to support function overloading.

    • It is also used in Python to avoid naming conflicts in modules.

    • Name mangling can make it difficult to access variables and functions from outside the class in which they are defined.

    • In C++, name mangling can be seen by using the 'nm' comman

  • Answered by AI

Skills evaluated in this interview

I applied via Naukri.com and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Coming to AEM,Interviewer has covered all the topics.

Interview Preparation Tips

Interview preparation tips for other job seekers - Pls don't join in TechMahindra.Especially for AEM Folks.Because there are no projects at all.They force you to learn and work in other domain.Then your AEM knowledge will vanish.Worst Company.

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is AD dns dhcp?
  • Ans. 

    AD DNS DHCP are Microsoft technologies used for network management and authentication.

    • Active Directory (AD) is a directory service used for authentication and authorization of users and computers in a network.

    • Domain Name System (DNS) is used for name resolution of network resources.

    • Dynamic Host Configuration Protocol (DHCP) is used for automatic IP address assignment to network devices.

    • AD, DNS, and DHCP are often used ...

  • Answered by AI
  • Q2. What is IaaS SaaS PaaS?
  • Ans. 

    IaaS, SaaS, and PaaS are cloud computing models that provide different levels of infrastructure, software, and platform services.

    • IaaS (Infrastructure as a Service) provides virtualized computing resources over the internet, such as servers, storage, and networking.

    • SaaS (Software as a Service) delivers software applications over the internet, eliminating the need for local installation and maintenance.

    • PaaS (Platform as ...

  • Answered by AI
Round 3 - Aptitude Test 

General questions for 1 hors online exams

Interview Preparation Tips

Interview preparation tips for other job seekers - be confident in your role and select which role you want to work

Skills evaluated in this interview

Interview Questionnaire 

3 Questions

  • Q1. About skilla
  • Q2. Project
  • Q3. Roles in

I applied via Campus Placement and was interviewed before Apr 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. About the basics of c, c++ and java, also asked to explain the project that I developed.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be bold and transparent. Explain your reasons and issues if any they are under standable.

I applied via Job Fair and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. What is your job role

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and strive hard to achieve what you desire

I applied via Approached by Company and was interviewed before Dec 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. What is n-tier architecture
  • Ans. 

    n-tier architecture is a software design pattern that divides an application into logical layers.

    • It separates presentation, application processing, and data management functions.

    • Each layer can be developed and maintained independently.

    • Examples include 3-tier and 4-tier architectures.

    • It improves scalability, maintainability, and flexibility of the application.

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. What is your expectation from company

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident while answering the questions and answers

Interview Questionnaire 

6 Questions

  • Q1. Explain abstract factory design pattern ?
  • Ans. 

    Abstract Factory is a creational design pattern that provides an interface for creating families of related objects.

    • Abstract Factory is used when we need to create families of related objects without specifying their concrete classes.

    • It provides an interface for creating objects of related classes without specifying their concrete classes.

    • It encapsulates a group of factories that have a common theme.

    • It promotes loose c...

  • Answered by AI
  • Q2. How do you do range based map iteration
  • Ans. 

    Range based map iteration can be done using a for-each loop or iterators.

    • Use a for-each loop to iterate over the map elements.

    • Alternatively, use iterators to traverse the map.

    • The range-based for loop is preferred for its simplicity and readability.

    • Example: for(auto const& [key, value] : myMap) { //do something with key and value }

  • Answered by AI
  • Q3. What are detached and joined threads
  • Ans. 

    Detached threads are independent threads that run separately from the main thread. Joined threads are threads that wait for the main thread to finish.

    • Detached threads are created using pthread_detach() function

    • Joined threads are created using pthread_join() function

    • Detached threads do not need to be explicitly terminated

    • Joined threads must be explicitly terminated using pthread_exit() or return statement

    • Detached thread...

  • Answered by AI
  • Q4. What are static code analysis tools
  • Ans. 

    Static code analysis tools are software programs that analyze source code to find potential issues and improve code quality.

    • Static code analysis tools scan code without executing it

    • They can detect issues such as security vulnerabilities, coding errors, and performance problems

    • Examples of static code analysis tools include SonarQube, ESLint, and Checkstyle

  • Answered by AI
  • Q5. Command to list currently running threads in linux
  • Ans. 

    Command to list currently running threads in linux

    • Use the 'ps' command with the 'H' option to display threads in a hierarchy

    • Use the 'top' command to display threads in real-time

    • Use the 'htop' command for an interactive display of threads

  • Answered by AI
  • Q6. Can we perform arithmetic operation on Unique pointer
  • Ans. 

    No, arithmetic operations cannot be performed on unique pointers.

    • Unique pointers are used to manage the lifetime of dynamically allocated objects.

    • They cannot be copied or assigned, only moved.

    • Arithmetic operations are not defined for pointers, including unique pointers.

  • Answered by AI

Skills evaluated in this interview

JCB Interview FAQs

What are the top questions asked in JCB Engineer Trainee interview?

Some of the top questions asked at the JCB Engineer Trainee interview -

  1. What if difference bet QA & ...read more
  2. What is diffect in weldi...read more
  3. What is 7 QC to...read more

Tell us how to improve this page.

JCB Engineer Trainee Salary
based on 20 salaries
₹1.9 L/yr - ₹4 L/yr
At par with the average Engineer Trainee Salary in India
View more details

JCB Engineer Trainee Reviews and Ratings

based on 8 reviews

3.7/5

Rating in categories

3.4

Skill development

3.9

Work-life balance

3.7

Salary

3.4

Job security

3.7

Company culture

2.5

Promotions

3.9

Work satisfaction

Explore 8 Reviews and Ratings
Assistant Manager
720 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
508 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
433 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Quality Engineer
271 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
229 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare JCB with

State Bank of India

3.8
Compare

HDFC Bank

3.9
Compare

ICICI Bank

4.0
Compare

Axis Bank

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview