Upload Button Icon Add office photos

JBM Group

Compare button icon Compare button icon Compare

Filter interviews by

JBM Group Engineer Trainee Interview Questions, Process, and Tips

Updated 8 Jul 2024

Top JBM Group Engineer Trainee Interview Questions and Answers

JBM Group Engineer Trainee Interview Experiences

4 interviews found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Fair and was interviewed in May 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

Only English, reasoning and mathematics

Round 2 - Technical 

(2 Questions)

  • Q1. Define clutch plate.
  • Ans. 

    Clutch plate is a friction disc in a clutch system that connects and disconnects the engine from the transmission.

    • Clutch plate is a crucial component in a manual transmission system.

    • It is located between the pressure plate and the flywheel.

    • The clutch plate is responsible for transferring power from the engine to the transmission by engaging and disengaging.

    • It consists of friction material on both sides to provide grip ...

  • Answered by AI
  • Q2. Define discpad.
  • Ans. 

    A discpad is a component of a disc brake system that provides friction to slow down or stop a vehicle.

    • Discpad is made of a friction material that presses against the disc rotor to create friction and slow down the vehicle.

    • It is an essential part of the disc brake system in vehicles.

    • Discpads need to be regularly checked and replaced to ensure optimal braking performance.

    • Common materials used for discpads include ceramic

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Tell me about yourself and about JBBM.
  • Q2. Then where are you complete your internship and about project.
Round 4 - Case Study 

How we solve shortage of production of product.

Engineer Trainee Interview Questions & Answers

user image shubham patil

posted on 8 Jul 2024

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What are the phases of APQP
  • Ans. 

    APQP stands for Advanced Product Quality Planning and consists of five phases.

    • Phase 1: Plan and Define Program - Establish the scope of the project, set goals, and create a timeline.

    • Phase 2: Product Design and Development - Design the product, conduct feasibility studies, and create prototypes.

    • Phase 3: Process Design and Development - Develop the manufacturing process, identify potential risks, and establish control pl...

  • Answered by AI
  • Q2. Explain different welding methods
  • Ans. 

    Different welding methods include MIG, TIG, stick, and flux-cored welding.

    • MIG (Metal Inert Gas) welding uses a wire electrode and shielding gas.

    • TIG (Tungsten Inert Gas) welding uses a non-consumable tungsten electrode and shielding gas.

    • Stick welding, also known as Shielded Metal Arc Welding (SMAW), uses a flux-coated electrode.

    • Flux-cored welding uses a tubular wire filled with flux to protect the weld pool.

  • Answered by AI

Engineer Trainee Interview Questions Asked at Other Companies

Q1. If 10 people had a meeting and they shake hands only once with ea ... read more
asked in Siemens
Q2. Puzzle - A drawer contains 10 pairs each of red and blue socks. W ... read more
asked in Sobha
Q3. Shear force diagram and bending moment diagram for combination of ... read more
Q4. Explain stress and strain curve; Different Modulus eg young,bulk ... read more
asked in AVASOFT
Q5. What is logic of amstrong number say its coding logic
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Newspaper Ad

Round 1 - HR 

(1 Question)

  • Q1. What is expected salary
Round 1 - Aptitude Test 

40 questions to be done in 20 minutes

Round 2 - Technical 

(2 Questions)

  • Q1. Understanding your key learning in Industrial Internship and basics of mechanical engg.
  • Q2. What is heat treatment?
  • Ans. 

    Heat treatment is a process used to alter the physical and mechanical properties of materials through heating and cooling.

    • Heat treatment involves heating a material to a specific temperature and holding it at that temperature for a certain period of time.

    • The purpose of heat treatment is to change the material's microstructure, which in turn affects its properties such as hardness, strength, and ductility.

    • Common heat tr...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be genuine to your interviewer and definitely you can get it.

JBM Group interview questions for designations

 Trainee Quality Engineer

 (1)

 Diploma Trainee Engineer

 (1)

 Graduate Engineer Trainee (Get)

 (11)

 Apprentice Trainee

 (1)

 Graduate Apprentice Trainee

 (1)

 Robotic Engineer Trainee

 (1)

 Trainee

 (3)

 QA Trainee

 (1)

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position

I applied via Company Website and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Interview Preparation Tips

Topics to prepare for Gabriel India Engineer Trainee interview:
  • Technical Support
  • Production
  • Machine Maintenance
Interview preparation tips for other job seekers - Always make eye contact with him

Interview Questionnaire 

1 Question

  • Q1. About 5S, TPM, IC engine, knocking

Interview Questionnaire 

4 Questions

  • Q1. When you apply for the Post of Sr Engineer, they expect a professional answer from your field. Since I was from a tooling background, they asked me few questions which were not very tricky so I answered th...
  • Q2. Generally, they would like to know whether you are ready to relocate. Compay prefers persons who are easy to relocate and travel. So be open-minded and accept the challenge.
  • Q3. They would like to know if you are adjustable in another state too.
  • Q4. They would like to know the salary expectation.

Interview Preparation Tips

Interview preparation tips for other job seekers - My advice to a new aspiring professional is to be open-minded and accept the challenge offered to you. Based on your performance the company will surely look after your choices and preference. you have to bid your salary a little high if they are likely to post you to some outstation.
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Supplier quality assurance NPD Apqp ppap SPC MSA QAV VENDOR RATTING FMEA XBAR CHAR CUSTOMER RATTING INPROCESS
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview in Jun 2022.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.
  • Ans. 

    I am an experienced Senior Engineer with a strong background in software development and project management.

    • Over 10 years of experience in software development

    • Proficient in multiple programming languages such as Java, C++, and Python

    • Extensive knowledge of software development methodologies and best practices

    • Proven track record of successfully leading and delivering complex projects

    • Strong problem-solving and analytical ...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. 8D report with real example
  • Ans. 

    8D report is a problem-solving methodology used to identify, correct and prevent recurring problems.

    • 8D stands for 8 Disciplines

    • It involves a team-based approach to problem-solving

    • The report includes a detailed description of the problem, root cause analysis, corrective actions, and preventive measures

    • Example: A manufacturing company received customer complaints about a defect in their product. The team used the 8D repo...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep study in details about your skills mentioned in resume.

JBM Group Interview FAQs

How many rounds are there in JBM Group Engineer Trainee interview?
JBM Group interview process usually has 2 rounds. The most common rounds in the JBM Group interview process are Technical, Aptitude Test and HR.
What are the top questions asked in JBM Group Engineer Trainee interview?

Some of the top questions asked at the JBM Group Engineer Trainee interview -

  1. What is heat treatme...read more
  2. What are the phases of A...read more
  3. Explain different welding meth...read more

Tell us how to improve this page.

JBM Group Engineer Trainee Interview Process

based on 5 interviews

Interview experience

3.6
  
Good
View more
JBM Group Engineer Trainee Salary
based on 27 salaries
₹1.6 L/yr - ₹4.1 L/yr
18% less than the average Engineer Trainee Salary in India
View more details

JBM Group Engineer Trainee Reviews and Ratings

based on 11 reviews

4.1/5

Rating in categories

4.0

Skill development

4.0

Work-life balance

3.5

Salary

3.5

Job security

4.3

Company culture

4.0

Promotions

4.2

Work satisfaction

Explore 11 Reviews and Ratings
Senior Executive
872 salaries
unlock blur

₹3 L/yr - ₹9.5 L/yr

Executive
869 salaries
unlock blur

₹1.4 L/yr - ₹6.8 L/yr

Assistant Manager
776 salaries
unlock blur

₹4.2 L/yr - ₹14.4 L/yr

Junior Executive
423 salaries
unlock blur

₹1.6 L/yr - ₹5.1 L/yr

Quality Engineer
368 salaries
unlock blur

₹1.4 L/yr - ₹5.1 L/yr

Explore more salaries
Compare JBM Group with

Subros

3.8
Compare

Ceat Tyres

4.0
Compare

UNO Minda

4.0
Compare

Apollo Tyres

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview