Upload Button Icon Add office photos

Filter interviews by

Isgec Hitachi Zosen Assistant Manager/Manager -(Technical) Interview Questions, Process, and Tips for Experienced

Updated 10 Mar 2021

Isgec Hitachi Zosen Assistant Manager/Manager -(Technical) Interview Experiences for Experienced

1 interview found

I applied via Referral and was interviewed in Sep 2020. There were 4 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. What is the duty cycle of power contractor?
  • Ans. 

    The duty cycle of a power contractor refers to the amount of time it can operate continuously without overheating or needing to cool down.

    • The duty cycle is typically expressed as a percentage, representing the ratio of operating time to the total time.

    • For example, a power contractor with a duty cycle of 50% can operate for 5 minutes and then needs to cool down for 5 minutes before being used again.

    • A higher duty cycle i...

  • Answered by AI
  • Q2. What is the drive and what are the types of drives?
  • Ans. 

    A drive is a device that reads or writes data on a storage medium. Types include hard disk, solid-state, optical, and flash drives.

    • A drive is a hardware component that allows data to be stored and retrieved from a storage medium.

    • Hard disk drives use spinning disks to read and write data, while solid-state drives use flash memory.

    • Optical drives use lasers to read and write data on CDs, DVDs, and Blu-ray discs.

    • Flash driv...

  • Answered by AI
  • Q3. How will you measure efficiency of motor without seeing name plate?
  • Ans. 

    Efficiency of motor can be measured by conducting a load test and measuring the input and output power.

    • Conduct a load test by connecting the motor to a dynamometer

    • Measure the input power using a wattmeter

    • Measure the output power using a torque meter and a speedometer

    • Calculate the efficiency using the formula: Efficiency = (Output Power/Input Power) x 100%

    • Compare the calculated efficiency with the standard efficiency fo

  • Answered by AI
  • Q4. How will you identify the type of breakdown (mechanical or electrical) of a solenoid valve?
  • Ans. 

    To identify the type of breakdown in a solenoid valve, one can perform visual inspection, check for electrical continuity, and conduct voltage and resistance tests.

    • Perform a visual inspection to check for any visible signs of damage or wear on the solenoid valve.

    • Check for electrical continuity by using a multimeter to test the continuity between the electrical connections of the solenoid valve.

    • Conduct voltage tests by ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Try to understand the types of machines available in the company and prepare basic details of it.

Skills evaluated in this interview

Interview questions from similar companies

I applied via LinkedIn and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. More about technical and planning of construction
  • Q2. Proper answers

Interview Preparation Tips

Interview preparation tips for other job seekers - You may have to wait for atleast 3 months to get a proper response from the HR, they hire only first class distinction holder candidates but

I applied via Naukri.com and was interviewed in Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Be clear on salary negotiation

Interview Preparation Tips

Interview preparation tips for other job seekers - Say confidently what ever it is..

I applied via Company Website and was interviewed in Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Nodejs basics,AWS S3,script file run command,how to catch db timeout
  • Q2. Connect db options,
  • Ans. 

    Connecting to a database has multiple options depending on the type of database and programming language used.

    • For SQL databases, options include using JDBC for Java, ODBC for C++, and ADO.NET for C#.

    • For NoSQL databases, options include using MongoDB's driver for Python or Node.js.

    • ORMs like Hibernate and Entity Framework can also be used to abstract away the database connection details.

    • Connection strings are used to spe...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Db connection attributes need to prepare well

I applied via Naukri.com and was interviewed before Mar 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Based on your previous jobs

Interview Preparation Tips

Interview preparation tips for other job seekers - It's totally your luck in interview

Interview Questionnaire 

1 Question

  • Q1. If your Experience person , mostly they ask your past experience work related question , If Fresher they ask theoretical question

I applied via Approached by Company and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Piping code and welder qualifications test
  • Ans. 

    Piping code and welder qualifications test

    • Piping code refers to the set of standards and regulations that govern the design, fabrication, and inspection of piping systems.

    • Welder qualifications test is a process of testing and certifying welders to ensure that they have the necessary skills and knowledge to perform welding tasks safely and effectively.

    • Both piping code and welder qualifications test are important in ensu...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. What is your current ctc

Interview Preparation Tips

Interview preparation tips for other job seekers - Just specific to your answer.
WQT/wps required in detail

I applied via Campus Placement and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Quant, verbal, lrdi

Round 2 - Technical 

(2 Questions)

  • Q1. Machine Design concepts
  • Q2. Thermodynamics and RAC Concepts

Interview Preparation Tips

Interview preparation tips for other job seekers - Crisp and to the point answers

I applied via Approached by Company and was interviewed before Mar 2018. There was 1 interview round.

Interview Preparation Tips

General Tips: Interviewer is very sound in technical so he was asking about total application wise and technical questions related to electrical.
Skills: Communication, Body Language, Decision Making Skills
Duration: >3 Months

Intern Interview Questions & Answers

Thermax Limited user image Shubhechya Sarkar

posted on 22 Aug 2017

I was interviewed in Jan 2017.

Interview Questionnaire 

3 Questions

  • Q1. Tell us about yourself.
  • Ans. 

    I am a recent graduate with a degree in Computer Science and a passion for coding and problem-solving.

    • Recent graduate with a degree in Computer Science

    • Passionate about coding and problem-solving

    • Strong communication and teamwork skills

  • Answered by AI
  • Q2. Tell us about your involvement in sports and your activities.
  • Ans. 

    I have been actively involved in sports since childhood, participating in various team sports and individual activities.

    • Played soccer for 10 years, competing at a regional level

    • Participated in track and field events in high school, specializing in long jump and hurdles

    • Currently enjoy hiking and rock climbing in my free time

  • Answered by AI
  • Q3. Discussion of company policies about side income and startups.

Interview Preparation Tips

Round: Test
Experience: It was pretty easy and generic. Not much related to my branch i.e. Chemical Engineering. Out of 24, 6 were selected for the next round.
Duration: 1 hour 30 minutes

Round: Group Discussion
Experience: 6 of us were given the choice between 2 topics: online shopping vs. Conventional shopping, and the success of swachh bharat. We selected the prior one after a discussion of 1 minute. We were given 3 minutes to brainstorm and 12 minutes to speak, so 12+3 = 15 minutes total. The mediators, that is the HR lady and the technical gentleman, just listened, did not interfere in our discussions.
Tips: Like any GD, it's crucial to demonstrate leadership without being patronising. And to dominate without being disrespectful to others. While it's ok not to take a rigid stance in a GD, it certainly gets you bonus points if you can convince the other person and "bring them to your side". It's not a debate, so even if you argue, you have to come to a more-or-less unanimous conclusion within the set time so your discussion must have a set direction. Bonus points if you're the one giving the direction.
Duration: 15 minutes

Round: HR Interview
Experience: It was for about 10-15 minutes. The HR lady and the tech gentleman were very chill. They began by asking me about myself. I have a startup of my own so I gave a short intro about myself, my immediate family, my goals and then into my startup. They had gone through my CV so they started asking about my activities in college and what I was doing. I think they were trying to figure out my character and if all of it was genuine. Then I again started talking about my startup, so they finally relented and asked me about it. I explained the idea to them and told them that I would want to continue working on my startup. They told me that it was not in accordance with their company's policy to have an employee occupied full-time in two companies. Then I informed them that my startup was my priority, and we agreed that I would not be a good fit for Thermax.
Tips: Be confident, cool and open during the interview. You are already good if you've progressed to the last stage of the selection process. The interviewer already knows you have flair. What they want to figure out is that whether you are the right fit for their company's culture. If you're not, no matter how good you are, they will not select you. And that's ok.

Isgec Hitachi Zosen Interview FAQs

What are the top questions asked in Isgec Hitachi Zosen Assistant Manager/Manager -(Technical) interview for experienced candidates?

Some of the top questions asked at the Isgec Hitachi Zosen Assistant Manager/Manager -(Technical) interview for experienced candidates -

  1. What is the drive and what are the types of driv...read more
  2. How will you identify the type of breakdown (mechanical or electrical) of a sol...read more
  3. How will you measure efficiency of motor without seeing name pla...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 417 Interviews
Thermax Limited Interview Questions
4.1
 • 250 Interviews
Tata Power Interview Questions
3.9
 • 161 Interviews
Voltas Interview Questions
4.0
 • 129 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
View all
Assistant Manager
19 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
18 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
14 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
14 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technician
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Isgec Hitachi Zosen with

Thermax Limited

4.1
Compare

BHEL

4.1
Compare

Larsen & Toubro Limited

4.0
Compare

Siemens

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview