Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by India Japan Lighting Team. If you also belong to the team, you can get access from here

India Japan Lighting Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

India Japan Lighting Assistant Team Leader Interview Questions and Answers

Updated 31 Jan 2024

India Japan Lighting Assistant Team Leader Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jul 2023. There were 3 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. 3m 7Q manpower handling
Round 2 - Technical 

(1 Question)

  • Q1. 7 tools 4 m
Round 3 - Aptitude Test 

Production department

Interview questions from similar companies

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Interview start with introduction so you have to prepare your self introduction very fluently in English
  • Q2. You have to highlight your best skill, its easy to you to explain and impress the interviewers
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion and your hobbies discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident during interview
Ye soch k jaoo hoga to thk nhe hoga to konsi last company h but har interview k badh apne interview k bare m alaysis kro ki kya galt bola kya sahi bola or apni galtii ko repet mt kro

Best of luck for interview

Interview Questionnaire 

3 Questions

  • Q1. Tell about function of Compressor.
  • Ans. 

    A compressor is a mechanical device that increases the pressure of a gas by reducing its volume.

    • Compressors are used in various applications such as air conditioning, refrigeration, and gas turbines.

    • They work by drawing in low-pressure gas and then compressing it to a higher pressure.

    • Compressors can be classified into positive displacement and dynamic types.

    • Positive displacement compressors use a piston or a rotating m...

  • Answered by AI
  • Q2. GD&T questions.
  • Q3. Engineering drawing related questions.

I applied via Walk-in and was interviewed before Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Just my name

Interview Preparation Tips

Interview preparation tips for other job seekers - Just look smart and studius because they don't care about anything except hiring you because they are just going to get a lot of work from ya

I applied via Naukri.com and was interviewed in Jan 2022. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Basic details about you and previous company experience
Round 2 - Technical 

(3 Questions)

  • Q1. GD&T , drawing level of understandings,auto-cad drawings comments ,basic knowledge about ERP systems
  • Q2. About Drawing symbols
  • Q3. Autocad drawing comments

Interview Preparation Tips

Interview preparation tips for other job seekers - Do the interviews with strong mind & confidence.All the best for interview

I applied via Referral and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Quality tools
  • Q2. 7 qc tools , why why analysis
  • Ans. 

    The 7 QC tools are used for quality control and the Why Why analysis is used to identify the root cause of a problem.

    • The 7 QC tools include Pareto chart, cause-and-effect diagram, control chart, histogram, scatter diagram, flowchart, and check sheet.

    • Why Why analysis involves asking 'why' multiple times to identify the underlying cause of a problem.

    • It helps in identifying the root cause of a problem and taking correctiv...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Done your homework before interview
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before May 2023. There were 4 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. Normal related to previous experience, about family background, expected salary.
Round 2 - Technical 

(1 Question)

  • Q1. About previous job profile and responsibilities related to project. Basic questions about your relevant field. Some questions about in which post you were going to hire.
Round 3 - Design Test 

(1 Question)

  • Q1. CAD test thus I am Design Engineer
Round 4 - HR 

(1 Question)

  • Q1. Regarding salary and other facilities

Interview Preparation Tips

Interview preparation tips for other job seekers - PVNA is a very good company and very good management. If you get chance to work you should go there.

I applied via Recruitment Consulltant

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. What is a process for tool maint and documentation in related field.
  • Ans. 

    The process for tool maintenance and documentation involves regular inspections, scheduled maintenance, and detailed record-keeping.

    • Perform regular inspections of tools to identify any issues or signs of wear and tear.

    • Schedule routine maintenance tasks such as cleaning, lubrication, and calibration.

    • Keep detailed records of all maintenance activities, including dates, tasks performed, and any repairs or replacements.

    • Doc...

  • Answered by AI
  • Q2. Tool types and it's layout of top to bottom and cutting clearance and how to set it.
  • Ans. 

    Tool types and their layout are important for efficient cutting. Proper cutting clearance and setting are crucial for accuracy.

    • Different tool types include drills, end mills, taps, reamers, and more

    • Layout from top to bottom depends on the specific tool and its purpose

    • Cutting clearance is the distance between the tool and the workpiece

    • Setting the tool involves adjusting its position and orientation for optimal cutting

    • Pr...

  • Answered by AI
  • Q3. Tool alignment and procedure in related tool and die
  • Ans. 

    Tool alignment and procedure are crucial in tool and die making.

    • Proper alignment ensures accurate and consistent production.

    • Tools should be inspected regularly for wear and damage.

    • Procedures should be documented and followed consistently.

    • Training and communication are important for ensuring proper tool alignment and procedure.

    • Examples of related tools include jigs, fixtures, and gauges.

  • Answered by AI
  • Q4. Tool material and it's hardness and process flow.
  • Ans. 

    Tool material, hardness, and process flow are important factors in engineering.

    • Tool material should be selected based on the type of work and the material being worked on.

    • Hardness is important for durability and wear resistance.

    • Process flow refers to the sequence of steps in a manufacturing process.

    • Tool material can affect the process flow and vice versa.

    • Examples of tool materials include high-speed steel, carbide, and...

  • Answered by AI
  • Q5. What is GD&T and it's types
  • Ans. 

    GD&T stands for Geometric Dimensioning and Tolerancing. It is a system used to define and communicate engineering tolerances.

    • GD&T is used to ensure that parts fit together and function properly.

    • There are 14 symbols used in GD&T to define different types of tolerances.

    • Some common types of GD&T include flatness, perpendicularity, and concentricity.

    • GD&T is often used in manufacturing and engineering industries.

    • It helps to...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. Your family background and information related to your self

Interview Preparation Tips

Interview preparation tips for other job seekers - Every problem first share to hr round and technical round

I applied via Walk-in and was interviewed before Nov 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Mathematical reasoning was there in test.

Round 3 - One-on-one 

(3 Questions)

  • Q1. About GD and T ? Which instruments are using in manufacturing industries , Elaborate with their specifications and uses also?
  • Q2. What is the least count of Vernier caliper, Micrometre and DVC, DMM?
  • Ans. 

    The least count of Vernier caliper, Micrometre, DVC, and DMM is the smallest measurement that can be read or measured using these instruments.

    • The least count of a Vernier caliper is typically 0.02 mm or 0.001 inch.

    • The least count of a Micrometre is usually 0.01 mm or 0.001 inch.

    • The least count of a DVC (Digital Vernier Caliper) depends on the specific model, but it is generally around 0.01 mm or 0.0005 inch.

    • The least c...

  • Answered by AI
  • Q3. What is additive manufacturing?
  • Ans. 

    Additive manufacturing is a process of creating three-dimensional objects by adding layers of material.

    • Additive manufacturing is also known as 3D printing.

    • It involves the use of computer-aided design (CAD) software to create a digital model of the object.

    • The digital model is then sliced into thin layers, and the additive manufacturing machine builds the object layer by layer.

    • Various materials can be used in additive ma...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Victora Auto Private Limited Assistant Engineer interview:
  • GD&T
  • System Analysis
Interview preparation tips for other job seekers - Keep learning and enhancing your knowledge daily .
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basic questions 7qc tools,core tools.
  • Q2. QMS- IATF16949 system related. Problem solving -8D,RCA

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare what you mentioned in your resume. Proactive approach for position which you are applying.

India Japan Lighting Interview FAQs

How many rounds are there in India Japan Lighting Assistant Team Leader interview?
India Japan Lighting interview process usually has 3 rounds. The most common rounds in the India Japan Lighting interview process are HR, Technical and Aptitude Test.
What are the top questions asked in India Japan Lighting Assistant Team Leader interview?

Some of the top questions asked at the India Japan Lighting Assistant Team Leader interview -

  1. 3m 7Q manpower handl...read more
  2. 7 tools ...read more

Tell us how to improve this page.

India Japan Lighting Assistant Team Leader Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Knorr-Bremse Interview Questions
3.9
 • 56 Interviews
Sanden Vikas Interview Questions
4.0
 • 45 Interviews
Adient Interview Questions
4.0
 • 18 Interviews
View all
India Japan Lighting Assistant Team Leader Salary
based on 5 salaries
₹1.7 L/yr - ₹1.9 L/yr
63% less than the average Assistant Team Leader Salary in India
View more details
Junior Engineer
153 salaries
unlock blur

₹1.6 L/yr - ₹3.5 L/yr

Senior Engineer
114 salaries
unlock blur

₹3 L/yr - ₹9 L/yr

Engineer
113 salaries
unlock blur

₹2 L/yr - ₹6.3 L/yr

Assistant Engineer
112 salaries
unlock blur

₹1.8 L/yr - ₹5 L/yr

Team Lead
99 salaries
unlock blur

₹1.5 L/yr - ₹4.3 L/yr

Explore more salaries
Compare India Japan Lighting with

Knorr-Bremse

3.9
Compare

Sanden Vikas

4.0
Compare

Victora Auto Private Limited

3.9
Compare

Gestamp

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview