Upload Button Icon Add office photos

Filter interviews by

HYUNDAI TRANSYS INDIA Engineer Trainee Interview Questions and Answers

Updated 11 Mar 2024

HYUNDAI TRANSYS INDIA Engineer Trainee Interview Experiences

1 interview found

Engineer Trainee Interview Questions & Answers

user image Budithi Srikala

posted on 11 Mar 2024

Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Difference between brittle and ductile Material
  • Ans. 

    Brittle materials break without significant deformation, while ductile materials can undergo significant plastic deformation before failure.

    • Brittle materials fracture easily with little deformation.

    • Ductile materials can deform significantly before breaking.

    • Examples of brittle materials include glass and ceramics.

    • Examples of ductile materials include metals like copper and aluminum.

  • Answered by AI

Interview questions from similar companies

Interview experience
1
Bad
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Company Website and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Coding decoding, blood relation

Round 3 - Case Study 

Business problem and analysis

I applied via Naukri.com and was interviewed in May 2020. There were 4 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What are the die casting and machining defects?
  • Ans. 

    Die casting and machining defects are common in manufacturing processes.

    • Die casting defects include porosity, shrinkage, cold shuts, and flash.

    • Machining defects include burrs, chatter marks, and tool marks.

    • Die casting defects can be caused by improper temperature, pressure, or metal flow.

    • Machining defects can be caused by dull tools, improper speeds and feeds, or poor fixturing.

    • Defects can lead to part failure, reduced

  • Answered by AI
  • Q2. What is the formula of filling and high speed ratio?
  • Ans. 

    Filling and high speed ratio formula is used to calculate the filling time of a container with a specific volume of liquid at a given flow rate.

    • Filling and high speed ratio formula is V/Q

    • V is the volume of the container and Q is the flow rate of the liquid

    • The formula is used to determine the time it takes to fill a container with a specific volume of liquid at a given flow rate

    • The higher the flow rate, the faster the c

  • Answered by AI
  • Q3. Why do u want to join Motherson?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be always job needy in front of interviewer.

I was interviewed in Jul 2020.

Interview Questionnaire 

1 Question

  • Q1. Waht is your achievements
  • Ans. 

    I have achieved several milestones throughout my career as a Senior Engineer.

    • Successfully led a team of engineers to develop and implement a new software system, resulting in a 20% increase in efficiency.

    • Received recognition for designing and implementing a cost-effective solution that reduced production downtime by 30%.

    • Contributed to the development of a groundbreaking technology that revolutionized the industry, lead...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - All most 3 Rounds they conducted, they taken 3 days for every round and they taken allmost 3 months to select... For learners this company was good...

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

Interview Questionnaire 

1 Question

  • Q1. Questions were based on CV

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to what you've mentioned in your CV

I applied via Referral and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Please explain about your profile

Interview Preparation Tips

Interview preparation tips for other job seekers - First of all be free to attend the interview.
Be bold in your explanations.
Questions mainly fall from your profile explanation.

Try to tell what you have worked with.

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Technical questions regarding GDC process, rejection control and analysis..
  • Q2. Hypothetical questions, besed on situation handling, manpower handling and decision making

Interview Preparation Tips

Interview preparation tips for other job seekers - Be specific and speak confident
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

4 sections of Mechanical, FM, Thermal, Manufacturing, Design

Round 3 - One-on-one 

(2 Questions)

  • Q1. What is 5S? How will you apply?
  • Ans. 

    5S is a workplace organization method that aims to improve efficiency and productivity by eliminating waste and optimizing workflow.

    • Sort - separate necessary items from unnecessary ones

    • Set in order - arrange necessary items in a logical and efficient manner

    • Shine - clean and inspect the work area regularly

    • Standardize - establish procedures and guidelines for maintaining the 5S system

    • Sustain - ensure that the 5S system i...

  • Answered by AI
  • Q2. Which is more denser lead or aluminium?
  • Ans. 

    Lead is more denser than aluminium.

    • Density of lead is 11.34 g/cm³ while that of aluminium is 2.70 g/cm³

    • Lead is commonly used in radiation shielding due to its high density

    • Aluminium is commonly used in aircraft due to its low density

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Sundaram Clayton Engineer Trainee interview:
  • Casting
  • AutoCAD
  • Magma
  • Creo
Interview preparation tips for other job seekers - Don't join the company, they will fire you after 2 years

I applied via Walk-in and was interviewed before Dec 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Write and explain GD&T symbols?
  • Ans. 

    GD&T symbols are used to specify the geometric requirements of a part or assembly.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • Symbols include: flatness, circularity, perpendicularity, concentricity, position, and more

    • Each symbol has a specific meaning and is used to communicate precise engineering requirements

    • GD&T is used in industries such as aerospace, automotive, and manufacturing

    • Example: A position symbol...

  • Answered by AI
  • Q2. Explain Cp, Cpk & Pp, Ppk?
  • Ans. 

    Cp, Cpk, Pp, and Ppk are statistical process control indices used to measure process capability and performance.

    • Cp and Cpk measure how well a process meets its specifications, with Cpk being more accurate for non-centered processes.

    • Pp and Ppk measure how well a process performs relative to its natural variation, with Ppk being more accurate for non-centered processes.

    • All four indices are calculated using the process me...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Related to GD&T, CNC programming knowledge, SPC, Fixture design and development, Tool design and development.

Interview Preparation Tips

Interview preparation tips for other job seekers - Willing to work extra hours and ready to compromise family members.

HYUNDAI TRANSYS INDIA Interview FAQs

How many rounds are there in HYUNDAI TRANSYS INDIA Engineer Trainee interview?
HYUNDAI TRANSYS INDIA interview process usually has 1 rounds. The most common rounds in the HYUNDAI TRANSYS INDIA interview process are Technical.

Tell us how to improve this page.

HYUNDAI TRANSYS INDIA Engineer Trainee Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more
HYUNDAI TRANSYS INDIA Engineer Trainee Salary
based on 5 salaries
₹1.8 L/yr - ₹3 L/yr
21% less than the average Engineer Trainee Salary in India
View more details
Assistant Manager
39 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Research Engineer
36 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Line Leader
26 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Core Engineering
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare HYUNDAI TRANSYS INDIA with

Bosch

4.2
Compare

Samvardhana Motherson Group

3.7
Compare

Continental

3.9
Compare

ZF Steering Gear

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview