i
Hyundai Motor India Limited
Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards
Filter interviews by
Basic technical aptitude based on AMCAT test pattern, easy to crack
Each group had 20 members only 2 were selected for further rounds
I applied via campus placement at Techno India Group, Kolkata and was interviewed in Jul 2021. There was 1 interview round.
Top trending discussions
posted on 10 Jan 2016
Resultant stiffness of two equal parts of a cut spring attached in parallel is 4K.
When two springs are attached in parallel, the resultant stiffness is the sum of their individual stiffness.
The stiffness of a spring is directly proportional to its length and inversely proportional to its cross-sectional area.
Therefore, when a spring of length L and stiffness K is cut into two equal parts, each part will have a length o...
The natural frequency of a simple mass system with the mass of the spring considered.
Natural frequency is the frequency at which a system oscillates without any external force.
The formula for natural frequency is sqrt(k/m)
Where k is the spring constant and m is the mass of the system.
The mass of the spring is added to the total mass of the system.
Example: A mass of 2 kg is attached to a spring with a spring constant of...
The first natural frequency of a semi-definite system is zero, which represents rigid body motion.
The first natural frequency of a system is the frequency at which it oscillates without any external force applied.
A semi-definite system has one or more degrees of freedom that are constrained, resulting in rigid body motion.
The first natural frequency of a semi-definite system is always zero, regardless of the number of ...
Designing a shaft under bending, torsion and axial loads using Tresca or Von-Mises theory for ductile material.
Shaft design involves considering the effects of bending, torsion, and axial loads.
Tresca theory assumes that yielding occurs when the maximum shear stress in a material reaches a critical value.
Von-Mises theory assumes that yielding occurs when the equivalent stress in a material reaches a critical value.
Duct...
Hydrostatic state of stress is when stress is applied uniformly in all directions. The theory of failure used is Maximum Shear Stress Theory.
Hydrostatic state of stress occurs when stress is applied uniformly in all directions.
It is characterized by a state of zero shear stress.
The theory of failure used for hydrostatic stress is Maximum Shear Stress Theory.
This theory states that failure occurs when the maximum shear ...
Different ways to operate a system above its natural frequency
Adding mass to the system
Changing the stiffness of the system
Applying external force to the system
Using active control techniques
Using passive control techniques
Using hybrid control techniques
I am a recent engineering graduate with a passion for problem-solving and a strong work ethic.
I recently graduated with a degree in engineering from XYZ University.
During my time in school, I completed several projects that required me to think critically and creatively to solve complex problems.
I am a quick learner and am always eager to take on new challenges.
In my free time, I enjoy tinkering with electronics and bu...
GM is a leading global automotive company with a strong commitment to innovation and sustainability.
GM has a rich history of over 100 years in the automotive industry
GM is committed to innovation and sustainability, with a focus on electric and autonomous vehicles
GM offers a diverse range of career opportunities in engineering, manufacturing, and business
GM has a strong culture of teamwork and collaboration
GM is a glob
Yes, I have faced such challenges in my life.
I started learning a new language and found it more difficult than expected, but I persevered and eventually became fluent.
I took on a leadership role in a group project and struggled to manage conflicting personalities and opinions, but I learned valuable communication and conflict resolution skills.
I attempted to start a small business and faced unexpected financial and lo...
posted on 13 Dec 2024
I applied via campus placement at National Institute of Technology (NIT), Tiruchirappalli and was interviewed in Nov 2024. There were 3 interview rounds.
Basic question on aptitude
Topic on emotional intelligence in workplace
I applied via campus placement at Vellore Institute of Technology (VIT) and was interviewed in May 2024. There were 2 interview rounds.
61 questions 60 mins, covers the fundamental of time, speed, relation, quadratic equations
The OSI model consists of 7 layers that define the functions of a network communication system.
Physical layer - deals with physical connections and transmission of raw data (e.g. cables, hubs)
Data link layer - responsible for node-to-node communication and error detection (e.g. switches, bridges)
Network layer - manages routing and addressing (e.g. routers)
Transport layer - ensures end-to-end communication and data flow...
posted on 11 Aug 2024
Basic Aptitude is required someone good knowledge of Maths and English can easily crack it.
posted on 8 Oct 2024
I applied via Campus Placement and was interviewed before Oct 2023. There were 3 interview rounds.
Aptitude and technical questions.
General topic for GD
I am a recent graduate with a degree in engineering, eager to learn and grow in a professional setting.
Recent graduate with a degree in engineering
Passionate about learning and growing in a professional setting
Strong problem-solving skills
Experience with relevant engineering software/tools
Excellent communication and teamwork abilities
posted on 8 Feb 2022
I applied via campus placement at Maharashtra Institute of Technology, Pune and was interviewed in Aug 2021. There were 2 interview rounds.
It was very easy. It includes Aptitude + Technical Questions.
I wish to join this company because of the diverse opportunities it offers in various departments.
Opportunity to gain experience in different areas of the company
Exposure to production logistics, operational logistics, finance, and product management
Chance to develop a well-rounded skill set
Potential for growth and advancement within the company
Ability to contribute to the company's success in multiple ways
I applied via Job Fair and was interviewed before Oct 2022. There were 4 interview rounds.
Practise before and research industry issues
Video interview, prep before.
Group task, 3 interviews and 1 task
posted on 20 Mar 2015
based on 1 interview
Interview experience
Manager
714
salaries
| ₹10 L/yr - ₹30 L/yr |
Assistant Manager
603
salaries
| ₹7 L/yr - ₹19.5 L/yr |
Trainee
439
salaries
| ₹1.4 L/yr - ₹3.8 L/yr |
Diploma Mechanical Engineer
322
salaries
| ₹1.1 L/yr - ₹4.5 L/yr |
Hyundai Diploma Trainee
261
salaries
| ₹1.5 L/yr - ₹4 L/yr |
Maruti Suzuki
Tata Motors
Mahindra & Mahindra
Toyota Kirloskar Motor