Hospitality Is Yours Lab Technician Interview Questions and Answers

Q1. What is current
Ans. 
Current is the flow of electric charge in a circuit.
• Current is measured in Amperes (A)

• It is the rate of flow of electric charge through a conductor

• Direct current (DC) flows in one direction, while alternating current (AC) changes direction periodically
Answered by AI
Add your answer
Q2. What is working of circuit breaker
Ans. 
A circuit breaker is an electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit.
• Circuit breakers detect faults in the electrical system and interrupt the flow of electricity to prevent damage.

• They consist of a switch mechanism and a tripping mechanism that activates when a fault is detected.

• Circuit breakers can be reset manually or automatically after tripping.

• Example...read more
Answered by AI
Add your answer
Q3. What is transformer
Ans. 
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
• Consists of two coils of wire (primary and secondary) wrapped around a core

• Primary coil receives electrical energy and creates a magnetic field

• Magnetic field induces a voltage in the secondary coil, transferring energy

• Used in power distribution, voltage regulation, and electrical isolati...read more
Answered by AI
Add your answer

Q1. Colour coding Regarding resistance
Ans. 
Resistance values are often color coded on resistors to easily identify their resistance value.
• Color coding is used on resistors to indicate their resistance value

• The colors represent numbers according to a specific color code chart

• The first two bands represent the first two digits of the resistance value, the third band represents the multiplier, and the fourth band represents the tolerance

• For example, a resistor with...read more
Answered by AI
Add your answer
Q2. Symbol of doide
Ans. 
The symbol of a diode is an arrow pointing towards a line, representing the flow of current in one direction only.
• Arrow pointing towards a line

• Flow of current in one direction only
Answered by AI
Add your answer

Q1. Technical quetions Department subjects Electrical points Electrical thieories
Add your answer
Q2. Basic formulaws Basic knoledge
Add your answer

Q1. How you will find a fault in AC?
Ans. 
To find a fault in an AC, you can follow these steps:
• Check if the AC is receiving power and if the circuit breaker is tripped

• Inspect the thermostat settings and ensure they are properly set

• Examine the air filter and clean or replace it if necessary

• Inspect the condenser unit for any visible damage or debris

• Check the refrigerant levels and ensure they are within the recommended range

• Inspect the electrical connections and...read more
Answered by AI
View 4 more answers
Q2. What is CSR and how you will find of AC?
Ans. 
CSR stands for Customer Service Representative. AC refers to Air Conditioning.
• CSR is a role in customer service where representatives assist customers with their inquiries, complaints, and requests.

• AC refers to the system that provides cooling and ventilation in buildings or vehicles.

• To find out about AC, one can refer to the user manual, consult an expert technician, or search online for troubleshooting guides.

• CSR and...read more
Answered by AI
View 3 more answers
Q3. What is the duration of vaccume pressure in AC?
Ans. 
The duration of vacuum pressure in an AC system varies depending on the specific circumstances.
• The duration of vacuum pressure in an AC system is typically determined by the evacuation process.

• During installation or repair, the vacuum pump is used to remove air and moisture from the system.

• The duration can range from a few minutes to several hours, depending on the size and complexity of the AC system.

• Once the desired ...read more
Answered by AI
View 2 more answers
Q4. What kinds of pipe used for hot and cold water supply ?
Ans. 
Different types of pipes are used for hot and cold water supply.
• Copper pipes are commonly used for both hot and cold water supply.

• PEX (cross-linked polyethylene) pipes are also used for hot and cold water supply.

• CPVC (chlorinated polyvinyl chloride) pipes are suitable for hot and cold water supply.

• Galvanized steel pipes were used in the past but are less common now due to corrosion issues.

• PVC (polyvinyl chloride) pipes
Answered by AI
View 7 more answers
Q5. What you will do if the fault comes in fixed pipe in wall?
Ans. 
If a fault comes in a fixed pipe in the wall, I would follow a systematic approach to address the issue.
• Assess the extent of the fault and identify the cause

• Turn off the water supply to prevent further damage

• Determine if the fault can be repaired or if the pipe needs to be replaced

• If repairable, use appropriate tools and materials to fix the fault

• Test the repaired pipe for leaks and ensure proper functionality

• If replac...read more
Answered by AI
View 1 more answer
Q6. Where you use the flow trip in building?
Ans. 
Flow trips are used in building to control the flow of fluids or gases.
• Flow trips are commonly used in plumbing systems to prevent backflow of water.

• They are also used in HVAC systems to regulate the flow of air.

• Flow trips can be found in industrial processes to control the movement of liquids or gases.

• In fire protection systems, flow trips are used to detect the presence of water and activate alarms or sprinklers.

• Flow...read more
Answered by AI
View 1 more answer
Q7. Which elbow is commonly use for drain the water ?
Ans. 
The commonly used elbow for draining water is the P-trap elbow.
• The P-trap elbow is commonly used for draining water in plumbing systems.

• It is named after its shape, which resembles the letter 'P'.

• The P-trap elbow is designed to prevent sewer gases from entering the building.

• It is typically used in sinks, showers, and other plumbing fixtures.

• Other types of elbows, such as 90-degree elbows, may also be used depending on
Answered by AI
View 1 more answer
Q8. What is wall putty and where the wall putty is used?
Ans. 
Wall putty is a white cement-based powder used for smoothening and leveling the surface of walls before painting.
• Wall putty is a type of filler material used to fill cracks, holes, and imperfections on walls.

• It is applied on the surface of walls to create a smooth and even base for painting.

• Wall putty helps in improving the durability and finish of paint.

• It is commonly used in both interior and exterior walls of buildi...read more
Answered by AI
View 1 more answer
Q9. What is name of equipments use in painting work?
Ans. 
Some common equipment used in painting work include paintbrushes, rollers, sprayers, drop cloths, and paint trays.
• Paintbrushes are used to apply paint to surfaces.

• Rollers are used to quickly cover large areas with paint.

• Sprayers are used for applying paint evenly and smoothly.

• Drop cloths are used to protect floors and furniture from paint splatters.

• Paint trays are used to hold and distribute paint during the painting p
Answered by AI
View 1 more answer
Q10. Where are you use the "Y" shape plumbing fixture?
Ans. 
The 'Y' shape plumbing fixture is used to connect three pipes together at a 45-degree angle.
• It is commonly used in plumbing systems to divert or combine the flow of water or other fluids.

• The 'Y' shape allows for smooth flow and minimal pressure drop.

• Examples include connecting a sink drain pipe to a main sewer line or connecting multiple pipes in a drainage system.
Answered by AI
View 1 more answer

Q1. Tell me about yourself.
Ans. 
I am a skilled technician with experience in troubleshooting and repairing various electronic devices.
• Skilled technician with expertise in troubleshooting and repairing electronic devices

• Proficient in diagnosing and resolving hardware and software issues

• Experienced in conducting routine maintenance and upgrades

• Knowledgeable in using diagnostic tools and software

• Strong problem-solving and communication skills

• Ability to
Answered by AI
View 3 more answers
Q2. What is your strength and weakness?
Ans. 
My strength is my attention to detail and my weakness is my tendency to overthink.
• Strength: Attention to detail

• Weakness: Overthinking

• Strength: Ability to troubleshoot and problem solve

• Weakness: Public speaking

• Strength: Strong technical knowledge

• Weakness: Time management
Answered by AI
View 3 more answers
Q3. What is your salary expectation?
Ans. 
I would expect a salary that is competitive for the Technician role based on my experience and qualifications.
• I would like to discuss the salary range for this position.

• I am open to negotiation and would consider the overall compensation package.

• Based on my research, the average salary for Technicians in this industry is around $X per year.

• I believe my skills and experience justify a fair and competitive salary.
Answered by AI
View 1 more answer

Good morning everyone
My name is haji gul today i want to gave you some safety instructions.
Do not start your work untill you don't wear a safety shoes.
If the need of helmat is happen then first wear a helmat.
Do not touch electric wire first you should off the power then work on it .
Wear a mask when you working in place where dust is comming like cutting some thing.

I am haji gul i completed my 3 years diploma in civil engineering in 2013 i had been successfully completed a small dam project in pakistan with earth engineering limited.the purpose of that project is to facilitate the vallage of orakzai pakistan for electricity and the dam is also used for irrigation purposes as well.
So there we install the electric poll and as well dynamo with dynamic machine used for electricity. i also lead the team of plumbing as well.

Q1. Why should we hire you?
Add your answer
Q2. What are your strengths and weaknesses?
View 2 more answers
Q3. Where do you see yourself in 5 years?
Add your answer
Q4. Why are you looking for a change?
View 2 more answers
Q5. Share details of your previous job.
Add your answer
Q6. What is your family background?
Add your answer
Q7. What are your salary expectations?
Add your answer
Q8. Tell me about yourself.
Add your answer