AmbitionBox
Search
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
HIL Limited Management Trainee Interview Questions and Answers for Freshers
Updated
26 Feb 2024
HIL Limited Management Trainee Interview Experiences for Freshers
1 interview found
I applied via Campus Placement and was interviewed before Sep 2020. There were 5 interview rounds.
Interview Questionnaire
2 Questions
- Q1. What is the BTL and ATL marketing
- Ans.
BTL (Below the Line) marketing targets specific individuals or groups through direct communication, while ATL (Above the Line) marketing targets a wider audience through mass media.
BTL marketing focuses on targeted communication with specific individuals or groups
ATL marketing targets a wider audience through mass media channels
BTL marketing includes tactics such as direct mail, email marketing, and telemarketing
ATL ma...
- Q2. Above the line and below the line marketing used in virtual and offline marketing activities
- Ans.
Above the line and below the line marketing are two different approaches used in virtual and offline marketing activities.
Above the line marketing refers to mass media advertising such as TV, radio, and print ads
Below the line marketing refers to targeted advertising such as direct mail, email marketing, and social media advertising
Both approaches can be used in virtual and offline marketing activities depending on the...
Answered by
AI
Add your answer
Answered by
AI
Add your answer
Interview Preparation Tips
Interview preparation tips for other job seekers - I have gone through the 4 rounds during interview, first was basic marketing concepts test which is online, second is group discussion, third is Technical and HR round they combined both the rounds and took it one depending on their time constraint. They asked the situation based questions and subject knowledge and asked the experience of internship. After this rounds one final interview was scheduled upon clearing this rounds and this final round is with zonal level manager with respective HR.
most of the time they ask basic experience and subject.
most of the time they ask basic experience and subject.
Interview questions from similar companies
Interview Preparation Tips
Round: aptitude test
Experience: The aptitude test consisted of verbal, analytical and numerical questions with sufficient time to answer the questions.
Round: Technical test
Experience: The technical test contained questions from almost all the compulsory courses that you may have studied over the past four-five years, mostly conceptual though but there were some numerical questions as well.
Round: Group Discussion
Experience: There was a group discussion on the topic ‘Is quality a myth in India? ‘ to eliminate a few students and the rest were selected for the final interviews.
Round: technical interview
Experience: Interview lasted for about 25-30 minutes. They started by asking about my interests and backgrounds and then came directly into questions related to my areas of interests. They asked questions about torque transmission through a shaft, I-beams, stress-strain and buckling and a little background about my thesis followed by one basic question related to it. The final 10-12 minutes were spent in discussing the questions that I had asked the interviewers and it also helped in lightening the mood, so I would suggest be ready to ask the interviewer a few questions to show that you are genuinely interested
During the interview questions were asked mostly from my areas of interests and a little about my thesis and internships. But it is important to know one or two courses very thoroughly.
General Tips: Do’s and Don’ts :
● Do not take GD’s lightly, I ignored it till the very last moment and did my first GD on the night before the actual GD. It is a shortlisting criteria for many mechanical engineering core companies and you wouldn’t want to lose out there.
● Read about your thesis and internships properly. Many of your interviews would revolve around that only.
● Select one or two major courses and prepare them thoroughly, you may be asked about the courses that you liked at IITK followed by some questions related to it.
● Practice explaining your projects and HR questions with someone.
● Get to know a little about the company before the interview. You may drop that information somewhere during the interview to show your interest. Also be ready to ask a question at the end.
● Don’t copy answers to HR questions from the internet, write your own and try to remember the key points.
● Don’t lose heart if you are not shortlisted or not selected. There are a lot of other options.
College Name: IIT Kanpur
Experience: The aptitude test consisted of verbal, analytical and numerical questions with sufficient time to answer the questions.
Round: Technical test
Experience: The technical test contained questions from almost all the compulsory courses that you may have studied over the past four-five years, mostly conceptual though but there were some numerical questions as well.
Round: Group Discussion
Experience: There was a group discussion on the topic ‘Is quality a myth in India? ‘ to eliminate a few students and the rest were selected for the final interviews.
Round: technical interview
Experience: Interview lasted for about 25-30 minutes. They started by asking about my interests and backgrounds and then came directly into questions related to my areas of interests. They asked questions about torque transmission through a shaft, I-beams, stress-strain and buckling and a little background about my thesis followed by one basic question related to it. The final 10-12 minutes were spent in discussing the questions that I had asked the interviewers and it also helped in lightening the mood, so I would suggest be ready to ask the interviewer a few questions to show that you are genuinely interested
During the interview questions were asked mostly from my areas of interests and a little about my thesis and internships. But it is important to know one or two courses very thoroughly.
General Tips: Do’s and Don’ts :
● Do not take GD’s lightly, I ignored it till the very last moment and did my first GD on the night before the actual GD. It is a shortlisting criteria for many mechanical engineering core companies and you wouldn’t want to lose out there.
● Read about your thesis and internships properly. Many of your interviews would revolve around that only.
● Select one or two major courses and prepare them thoroughly, you may be asked about the courses that you liked at IITK followed by some questions related to it.
● Practice explaining your projects and HR questions with someone.
● Get to know a little about the company before the interview. You may drop that information somewhere during the interview to show your interest. Also be ready to ask a question at the end.
● Don’t copy answers to HR questions from the internet, write your own and try to remember the key points.
● Don’t lose heart if you are not shortlisted or not selected. There are a lot of other options.
College Name: IIT Kanpur
Interview Questionnaire
2 Questions
- Q1. 5 min for HR
- Q2. 10 min for technical
Add your answer
Add your answer
Interview Preparation Tips
Round: Test
Experience: There was no negative marking in test(but our seniors got the paper with negative marking so nothing can be predicted for future) but there was time limit so u have to maintain ur speed,once u move forward for next question u can not go back to previous question so u have to be careful which question u have to skip.questions were not very easy nor they were tough,mathematics questions were from 11 12 class not from the B.Tech course.
Tips: for aptitude questions plz go through all types of patterns(work,wages,profit loss,capital interest,principal interest,average.speed,distance,time ), u can get them in MADE EASY aptitude book,for technical go through all the subjects(machines,power system,analog,digital,instrumentation,networks,control system)because there was atleast one question from each subject although they were easy ,if u r preparing for GATE u just need remember the basic ,the can be solved on finger tips
Duration: 2 HR minutes
Total Questions: 120
Round: Group Discussion
Experience: topic was very easy so everyone was ready with the points,boys were speaking with dominating voice,u have to be very careful to get a chance to speak
Tips: search common GD topics on net and write ur own points for them, go through the GD on net so u can get an idea how to start the topic or else join any of the coaching for GD,dont speak much but when u speak be confident and speak simple language don't use complicated words
Duration: 15 minutes
Round: Other Interview
Experience: they asked me to speak about myself for 5 min they were very cool,they were continuously looking in my CV and questioning about what I have written in it(about my sport,schooling,brother,my family,childhood)for technical they asked me about sensors and as an ee student which instrument I will be using for measuring fuel level in the automobiles,they were very much impressed by my written test (as they said to me,so try to do it well) they were very much cool and smiling all the time,with their body language I was able to make it out that they will select me
Tips: if u r a girl from non mechanical branch then ur chances of getting selected is quite more as compared with the boys of non mechanical branch(provided u also give them answer for their question confidently with good body language ) , for boys if u want to clear ur interview prepare thoroughly with ur technical subjects
General Tips: give the written test of consultancy companies so u can have an idea of aptitude questions,if u clear the test of those companies and get selected for GD give 100% in the GD,if u get selected for next round interview and u dont want to join the company say no to them in the interview,but plz if u dont want to join a company just dont leave it because u want to wait for ur dream company ,the above trick will help u to get experience and gain confidence but be careful
Skill Tips: go through the campus placement papers on net
Skills: alertness, speed, acuracy
College Name: NIT BHOPAL
Motivation: My brother is a pass from MANIT 2011 mechanical batch,he wanted to join tata motors but as he had a drop after his 12th class he was not allowed to sit for the written,when I said him about tata motors vist to MANIT in 2014 he just said "KUCH BHI KAR PAR TATA MOTOR ME JANA HI HAI TUZE HAAT SE NAHI JANI CHAHIYE YE COMPANY"
Funny Moments: when i got selected for tata motors i called my brother and gave him the news he said CHAL MERA SAPNA TUZME DEKHLIYA MEINEi was in the hostel and i was called to the admin to collect my offer letter and sign a copy of that and them back i was so much excited that i took my offer letter and was busy at talking the HRs were looking at me and laughing then the TPO came and said ANJALI ab de bhi de sign karke unhe
Experience: There was no negative marking in test(but our seniors got the paper with negative marking so nothing can be predicted for future) but there was time limit so u have to maintain ur speed,once u move forward for next question u can not go back to previous question so u have to be careful which question u have to skip.questions were not very easy nor they were tough,mathematics questions were from 11 12 class not from the B.Tech course.
Tips: for aptitude questions plz go through all types of patterns(work,wages,profit loss,capital interest,principal interest,average.speed,distance,time ), u can get them in MADE EASY aptitude book,for technical go through all the subjects(machines,power system,analog,digital,instrumentation,networks,control system)because there was atleast one question from each subject although they were easy ,if u r preparing for GATE u just need remember the basic ,the can be solved on finger tips
Duration: 2 HR minutes
Total Questions: 120
Round: Group Discussion
Experience: topic was very easy so everyone was ready with the points,boys were speaking with dominating voice,u have to be very careful to get a chance to speak
Tips: search common GD topics on net and write ur own points for them, go through the GD on net so u can get an idea how to start the topic or else join any of the coaching for GD,dont speak much but when u speak be confident and speak simple language don't use complicated words
Duration: 15 minutes
Round: Other Interview
Experience: they asked me to speak about myself for 5 min they were very cool,they were continuously looking in my CV and questioning about what I have written in it(about my sport,schooling,brother,my family,childhood)for technical they asked me about sensors and as an ee student which instrument I will be using for measuring fuel level in the automobiles,they were very much impressed by my written test (as they said to me,so try to do it well) they were very much cool and smiling all the time,with their body language I was able to make it out that they will select me
Tips: if u r a girl from non mechanical branch then ur chances of getting selected is quite more as compared with the boys of non mechanical branch(provided u also give them answer for their question confidently with good body language ) , for boys if u want to clear ur interview prepare thoroughly with ur technical subjects
General Tips: give the written test of consultancy companies so u can have an idea of aptitude questions,if u clear the test of those companies and get selected for GD give 100% in the GD,if u get selected for next round interview and u dont want to join the company say no to them in the interview,but plz if u dont want to join a company just dont leave it because u want to wait for ur dream company ,the above trick will help u to get experience and gain confidence but be careful
Skill Tips: go through the campus placement papers on net
Skills: alertness, speed, acuracy
College Name: NIT BHOPAL
Motivation: My brother is a pass from MANIT 2011 mechanical batch,he wanted to join tata motors but as he had a drop after his 12th class he was not allowed to sit for the written,when I said him about tata motors vist to MANIT in 2014 he just said "KUCH BHI KAR PAR TATA MOTOR ME JANA HI HAI TUZE HAAT SE NAHI JANI CHAHIYE YE COMPANY"
Funny Moments: when i got selected for tata motors i called my brother and gave him the news he said CHAL MERA SAPNA TUZME DEKHLIYA MEINEi was in the hostel and i was called to the admin to collect my offer letter and sign a copy of that and them back i was so much excited that i took my offer letter and was busy at talking the HRs were looking at me and laughing then the TPO came and said ANJALI ab de bhi de sign karke unhe
Pawan Kumar
I was interviewed in Jun 2017.
Interview Preparation Tips
Round: Resume Shortlist
Experience: it was very optimistic.
Tips: always be positive
Experience: it was very optimistic.
Tips: always be positive
I applied via Recruitment Consultant and was interviewed before Dec 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. What improvements you did in your last company ?
Add your answer
Interview Preparation Tips
Interview preparation tips for other job seekers - Wear formal dress, shaving should be done.
Interview Questionnaire
2 Questions
- Q1. Questions related to resume, intern, projects
- Q2. Manufacturing process of cement company
- Ans.
The manufacturing process of cement involves crushing, grinding, and mixing limestone and other raw materials.
Raw materials are crushed and blended in the correct proportions
The mixture is heated in a rotary kiln to form clinker
The clinker is cooled and ground into a fine powder with gypsum and other additives
The powder is stored in silos and shipped in bags or bulk
Quality control measures are taken throughout the proc
Add your answer
Answered by
AI
Add your answer
Interview Preparation Tips
Round: Test
Experience: Number of Students selected: 3
Topics: profit & loss, ratio, Percentage reasoning.
Duration: 40 minutes
General Tips: Study thermodynamics, fluid dynamics, heat & mass balance.
College Name: IIT KANPUR
Experience: Number of Students selected: 3
Topics: profit & loss, ratio, Percentage reasoning.
Duration: 40 minutes
General Tips: Study thermodynamics, fluid dynamics, heat & mass balance.
College Name: IIT KANPUR
I applied via Referral and was interviewed before Sep 2017. There were 2 interview rounds.
Interview Preparation Tips
Round: Offer letter
Experience: I got confirmation from HR at December, but they gave letter in march month, day by day I have to call them and follow for the offer letter, They gave offer letter after 3 months, but ask me to join within one month.
General Tips: Please dont prefer to work in Mahindra and dont spoil your carrier.
Duration: 1-3 Months
Experience: I got confirmation from HR at December, but they gave letter in march month, day by day I have to call them and follow for the offer letter, They gave offer letter after 3 months, but ask me to join within one month.
General Tips: Please dont prefer to work in Mahindra and dont spoil your carrier.
Duration: 1-3 Months
Yash Shah
Interview Preparation Tips
Round: Test
Experience: There were 4 sections related to quant, logical, verbal and technical. The technical part was above par especially if you are mining engineer as most of the question in technical section will be based on course of 6th & 7th semester while company visits after 5th semester.
Tips: The part of aptitude and logical is usually very simple and most of the people easily scores in these sections. As I said technical is tough. So, the main difference is due to marks you get in the verbal ability part.
Do LOD-1 of Arun Sharma and questions from Indiabix.com which will be sufficient for aptitude part. For technical, you can refer some basic notes of u/g coal, ventilation and mine legislation (for mining engineering)
Duration: 120 minutes
Total Questions: 95
Round: Group Discussion
Experience: The GD was little bit unusual as they allowed every one to put forward their points one by one and then counter the points of other if you want. It may depend on the HR guy visiting the campus.
Tips: For GD, just focus on the basics like don't be too dominant, open yourself to points put by other, do not right away take a single side in case of GD with debatable topic.
Round: Technical Interview
Experience: It was the 3rd & the last round the Personal Interview. They may have a look at the CV (as was case with me). Usually kept the questions strictly related to the technical and management aspects of mining especially focuses on your projects and papers. They also posed some genuine and general HR questions towards the end of the interview. The main focus in HR question is to find out that will you be adaptable to the remote location of the job.
Tips: Focus on your CV. Never put a false point in it. Be yourself and stay focused in whichever way you can. For me, I listen to music in any such situation and that's what I was doing half an hour before interview. Be dressed up properly as it gives you a lot of confidence boost. Prepare for some basic HR question. Make sure that you put the point where you want interviewer to focus on in the introduction in the best way possible so that interview can take a better and your preferred pathway.
General Tips: Be focused on your goals especially short-term. If you want to prepare for CAT then I would say you should say NO to internship. In case of MS, you can surely grab it. Be sure about this at the start of the 5th semester. Interact with your seniors and colleagues and based on your interest make a suitable decision for yourself.
In case you want the job in core sector then start improving the technical knowledge. Give importance to your B.Tech. project. Adapt yourself to the condition that you will get a remote location if you are a mining engineer
Skill Tips: Start focusing towards building skills from the 5th sem. Getting an intern at any company will help you improve your technical skills. Prepare for aptitude skills as a leisure activity. Form a serious group who are ready to do a GD daily. Get as much technical knowledge as you can and keep your concepts clear. Also maintain a decent GPA as the company usually prefers people with higher grades.
Skills: Technical Questions, Group Discussion Skills, Aptitude
College Name: Indian School of Mines
Motivation: I was not that sure at that time between doing MBA or to remain in the core sector, so for me there was no motivation. I was just going with the flow and BAMM!! got intern. Then i started taking real interest in the technical aspects.
PLEASE DON'T BE LIKE ME!!!
Funny Moments: During interview, I addressed my father working as Govt. Servant instead of employee. The HR wrote that point and asked me about it later after all the technical question. I was left embarrassed and giving lame excuse that it is the word we use in day-to-day language and the whole panel was laughing on me..:P
Thank GOD!! it didn't create too much negative impact
Experience: There were 4 sections related to quant, logical, verbal and technical. The technical part was above par especially if you are mining engineer as most of the question in technical section will be based on course of 6th & 7th semester while company visits after 5th semester.
Tips: The part of aptitude and logical is usually very simple and most of the people easily scores in these sections. As I said technical is tough. So, the main difference is due to marks you get in the verbal ability part.
Do LOD-1 of Arun Sharma and questions from Indiabix.com which will be sufficient for aptitude part. For technical, you can refer some basic notes of u/g coal, ventilation and mine legislation (for mining engineering)
Duration: 120 minutes
Total Questions: 95
Round: Group Discussion
Experience: The GD was little bit unusual as they allowed every one to put forward their points one by one and then counter the points of other if you want. It may depend on the HR guy visiting the campus.
Tips: For GD, just focus on the basics like don't be too dominant, open yourself to points put by other, do not right away take a single side in case of GD with debatable topic.
Round: Technical Interview
Experience: It was the 3rd & the last round the Personal Interview. They may have a look at the CV (as was case with me). Usually kept the questions strictly related to the technical and management aspects of mining especially focuses on your projects and papers. They also posed some genuine and general HR questions towards the end of the interview. The main focus in HR question is to find out that will you be adaptable to the remote location of the job.
Tips: Focus on your CV. Never put a false point in it. Be yourself and stay focused in whichever way you can. For me, I listen to music in any such situation and that's what I was doing half an hour before interview. Be dressed up properly as it gives you a lot of confidence boost. Prepare for some basic HR question. Make sure that you put the point where you want interviewer to focus on in the introduction in the best way possible so that interview can take a better and your preferred pathway.
General Tips: Be focused on your goals especially short-term. If you want to prepare for CAT then I would say you should say NO to internship. In case of MS, you can surely grab it. Be sure about this at the start of the 5th semester. Interact with your seniors and colleagues and based on your interest make a suitable decision for yourself.
In case you want the job in core sector then start improving the technical knowledge. Give importance to your B.Tech. project. Adapt yourself to the condition that you will get a remote location if you are a mining engineer
Skill Tips: Start focusing towards building skills from the 5th sem. Getting an intern at any company will help you improve your technical skills. Prepare for aptitude skills as a leisure activity. Form a serious group who are ready to do a GD daily. Get as much technical knowledge as you can and keep your concepts clear. Also maintain a decent GPA as the company usually prefers people with higher grades.
Skills: Technical Questions, Group Discussion Skills, Aptitude
College Name: Indian School of Mines
Motivation: I was not that sure at that time between doing MBA or to remain in the core sector, so for me there was no motivation. I was just going with the flow and BAMM!! got intern. Then i started taking real interest in the technical aspects.
PLEASE DON'T BE LIKE ME!!!
Funny Moments: During interview, I addressed my father working as Govt. Servant instead of employee. The HR wrote that point and asked me about it later after all the technical question. I was left embarrassed and giving lame excuse that it is the word we use in day-to-day language and the whole panel was laughing on me..:P
Thank GOD!! it didn't create too much negative impact
Management Trainee Interview Questions & Answers
Tata Steel
Pravas Janmejay Parida
posted on 21 Feb 2015
Interview Questionnaire
6 Questions
- Q1. Tell me about yourself
- Ans.
I am a motivated and hardworking individual with a passion for learning and growth.
I have a Bachelor's degree in Business Administration
I have completed several internships in the marketing and sales field
I am proficient in Microsoft Office and have experience with CRM software
I am a team player and enjoy collaborating with others to achieve common goals
- Q2. Some HR questions
- Q3. Fluids and hydraulic machines
- Q4. Design of machines
- Ans.
Design of machines involves creating efficient and effective systems that meet specific needs.
Identify the purpose and requirements of the machine
Consider the materials and components needed
Create a detailed design plan
Test and refine the design
Ensure safety and compliance with regulations
Continuously improve and update the design
- Q5. Strength of materials
- Ans.
Strength of materials is the study of how materials resist deformation and failure under various forces and loads.
It involves analyzing the behavior of materials under stress and strain
Factors such as material composition, shape, and size are considered
Testing methods such as tension, compression, and bending are used to determine material properties
Applications include designing structures, machines, and consumer prod...
- Q6. IC engines
Answered by
AI
View 19 more answers
Add your answer
Add your answer
Answered by
AI
Add your answer
Answered by
AI
Add your answer
Add your answer
Interview Preparation Tips
Round: Test
Experience: Questions were a bit tough. However did the questions I was sure of.
Tips: See some cat and gate preparation books.
Round: Group Discussion
Duration: 20 minutes
Round: HR Interview
Tips: Be confident while answering.
Round: Technical Interview
Experience: Could not answer all the questions, however answered the ones I knew perfectly well and tried to explain others.
Tips: If you know the answer say it. don't guess or try to manipulate, your entire interview may revolve around a single question only and at the end you'll be really frustrated.
Skills: Communication skills, Sound technical skills, Analytical, Behavioral skills
College Name: NIT ROURKELA
Experience: Questions were a bit tough. However did the questions I was sure of.
Tips: See some cat and gate preparation books.
Round: Group Discussion
Duration: 20 minutes
Round: HR Interview
Tips: Be confident while answering.
Round: Technical Interview
Experience: Could not answer all the questions, however answered the ones I knew perfectly well and tried to explain others.
Tips: If you know the answer say it. don't guess or try to manipulate, your entire interview may revolve around a single question only and at the end you'll be really frustrated.
Skills: Communication skills, Sound technical skills, Analytical, Behavioral skills
College Name: NIT ROURKELA
Skills evaluated in this interview
SAMEER SHEKHAR
Interview Preparation Tips
Round: Resume Shortlist
Experience: SINCE IT WAS A CAMPUS PLACMENT .. SO WHAT U NEED IZ NLY 6 GPA AND 60% CAREER WITH NO BACKLOGS.
Tips: TRY TO KEEP THE ABOVE CRITERIA AT THE TIME OF RECRUITMENT.
Round: Test
Experience: in apti and logical sections ..question were easy...formula based..speed is needed....dnt rely on others...dnt attempt lenthy questions..leave it..for last ..mark them for reviw...solve easy questions first . And in technical section .. u need ur technical knowledge clear which cant be done in 1 day..u need to study them from handbook ou whatever material ..from way back ..say 3-4 months back.
Tips: have faith on urself..dnt rely on other..keep mind cool during exam..foolow certain strategy.
Duration: 120 mins minutes
Total Questions: 120
Round: Group Discussion
Experience: ENOGH OPPURTUNITY WAS THERE FOR EVERYBODY TO SPEAK..ALL U NEED IS TO CAPITALIZE,,,,
Tips: IF POSSIBLE ..START THE GD....DONT SPEAK MUCH..ALLOW OTHER TO SPEAK..LISTEN TO EVERYONE...MAKE POINTS OUT OF THEM...DONT SHOUT..TRY TO WRAP UP....
Duration: 20 MINS minutes
Round: Technical Interview
Experience: TOUCHED EVERY IMP PARTS OF MECH.....DEEP KNOWLEDGE IS NEEDED...SUMMER TRAINING WAS VERY IMP.
Tips: DONT MAKE HR PEOPLE FOOL...THEY HAVE VAST EXPERINCE OF INTERVIW..IF U DNT KNOW THE ANSWER SAY IT ...DNT GIVE FOOLISH ANSWERS.....HAVE DEEP KNOWLEDGE ABT UR SUMMER TRAING..EVERY MINUTE DETAILS ... ITS TOUGH TO MAKE HR PEOPLE CONVINCED EASLY..U NEED TO CONVINCE THEM TO UR ANSWERS.
Round: HR Interview
Experience: I GAVE HONEST ANSWER..
Tips: GIVE HONEST ANSWER..
General Tips: BE SURE.. BE CONFIDENT..BE POSTIVE. DNT THINK OF SELECTION OR REJECTION...ONLY BE HONEST TO UR WORK.
Skill Tips: MAKE SURE U R GOOD AT CORE . IF U PREPARE FOR GATE N U HAVE GOOD COMMUNICATION SKILLS ..ITS EASY FOR U.
Skills: CORE KNOWLEDGE, SPEAKING SKILLS
College Name: KIIT UNIVERSITY
Motivation: DREAM COMPANY FOR EVERY SINGLE MECHIE
Funny Moments: when hr asked why u wanted to join apart from packafe...i said ki
Experience: SINCE IT WAS A CAMPUS PLACMENT .. SO WHAT U NEED IZ NLY 6 GPA AND 60% CAREER WITH NO BACKLOGS.
Tips: TRY TO KEEP THE ABOVE CRITERIA AT THE TIME OF RECRUITMENT.
Round: Test
Experience: in apti and logical sections ..question were easy...formula based..speed is needed....dnt rely on others...dnt attempt lenthy questions..leave it..for last ..mark them for reviw...solve easy questions first . And in technical section .. u need ur technical knowledge clear which cant be done in 1 day..u need to study them from handbook ou whatever material ..from way back ..say 3-4 months back.
Tips: have faith on urself..dnt rely on other..keep mind cool during exam..foolow certain strategy.
Duration: 120 mins minutes
Total Questions: 120
Round: Group Discussion
Experience: ENOGH OPPURTUNITY WAS THERE FOR EVERYBODY TO SPEAK..ALL U NEED IS TO CAPITALIZE,,,,
Tips: IF POSSIBLE ..START THE GD....DONT SPEAK MUCH..ALLOW OTHER TO SPEAK..LISTEN TO EVERYONE...MAKE POINTS OUT OF THEM...DONT SHOUT..TRY TO WRAP UP....
Duration: 20 MINS minutes
Round: Technical Interview
Experience: TOUCHED EVERY IMP PARTS OF MECH.....DEEP KNOWLEDGE IS NEEDED...SUMMER TRAINING WAS VERY IMP.
Tips: DONT MAKE HR PEOPLE FOOL...THEY HAVE VAST EXPERINCE OF INTERVIW..IF U DNT KNOW THE ANSWER SAY IT ...DNT GIVE FOOLISH ANSWERS.....HAVE DEEP KNOWLEDGE ABT UR SUMMER TRAING..EVERY MINUTE DETAILS ... ITS TOUGH TO MAKE HR PEOPLE CONVINCED EASLY..U NEED TO CONVINCE THEM TO UR ANSWERS.
Round: HR Interview
Experience: I GAVE HONEST ANSWER..
Tips: GIVE HONEST ANSWER..
General Tips: BE SURE.. BE CONFIDENT..BE POSTIVE. DNT THINK OF SELECTION OR REJECTION...ONLY BE HONEST TO UR WORK.
Skill Tips: MAKE SURE U R GOOD AT CORE . IF U PREPARE FOR GATE N U HAVE GOOD COMMUNICATION SKILLS ..ITS EASY FOR U.
Skills: CORE KNOWLEDGE, SPEAKING SKILLS
College Name: KIIT UNIVERSITY
Motivation: DREAM COMPANY FOR EVERY SINGLE MECHIE
Funny Moments: when hr asked why u wanted to join apart from packafe...i said ki
HIL Limited Interview FAQs
How many rounds are there in HIL Limited Management Trainee interview for freshers?
HIL Limited interview process for freshers usually has 1 rounds. The most common rounds in the HIL Limited interview process for freshers are Technical.
What are the top questions asked in HIL Limited Management Trainee interview for freshers?
Tell us how to improve this page.
HIL Limited Interviews By Designations
- HIL Limited Senior Officer Interview Questions
- HIL Limited Management Trainee Interview Questions
- HIL Limited Assistant Manager Interview Questions
- HIL Limited Manager Quality Assurance Interview Questions
- HIL Limited Executive Interview Questions
- HIL Limited Graduate Engineer Trainee (Get) Interview Questions
- HIL Limited Store Keeper Interview Questions
- HIL Limited Senior Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Sales Management Trainee Interview Questions
- Management Trainee Marketing Interview Questions
- Product Management Trainee Interview Questions
- Management Staff Interview Questions
- Management Executive Interview Questions
- Management Trainee - Technical Interview Questions
- Construction Management Interview Questions
- Management Consultant Interview Questions
- Show more
Management Trainee Interview Questions from Similar Companies
HIL Limited Management Trainee Reviews and Ratings
based on 1 review
Rating in categories
|
Assistant Manager
216
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Production Engineer
44
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Manager
41
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Deputy Manager
41
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Senior Manager
31
salaries
| ₹0 L/yr - ₹0 L/yr |
Compare HIL Limited with
ACC
Compare
Ambuja Cements
Compare
UltraTech Cement
Compare
Grasim Industries
Compare
Popular Calculators
Did you find this page helpful?
Yes No
- Home >
- Interviews >
- HIL Limited Interview Questions >
- HIL Limited Management Trainee Interview Questions for Fresher
Share an Interview