HCL TechBee Executive Electrical Maintenance Interview Questions and Answers

Reasoning , mathematics

Q1. What is behaviour ?
Ans. 
Behaviour refers to the way in which a person or animal acts or conducts themselves in response to a particular situation or stimulus.
• Behaviour is influenced by genetics, environment, and past experiences.

• It can be observed and measured through actions, reactions, and responses.

• Behaviour can be categorized as either innate (instinctual) or learned.

• Examples of behaviour include aggression, shyness, curiosity, and friend
Answered by AI
Add your answer
Q2. What is the best method in power transfers?
Ans. 
The best method in power transfers is through high voltage transmission lines.
• High voltage transmission lines are more efficient in transferring power over long distances.

• Using transformers to step up the voltage before transmission and step down the voltage at the receiving end helps minimize power loss.

• HVDC (High Voltage Direct Current) transmission is another efficient method for long distance power transfers.

• Smart ...read more
Answered by AI
Add your answer

Q1. What is current
Ans. 
Current is the flow of electric charge through a conductor.
• Current is measured in Amperes (A)

• It is the rate of flow of electric charge

• Current can be either direct current (DC) or alternating current (AC)

• Examples: A light bulb connected to a power source has current flowing through it

• In a circuit, current flows from the positive terminal of the voltage source to the negative terminal
Answered by AI
Add your answer
Q2. What are the method to convert in inverter
Ans. 
Methods to convert inverter include pulse width modulation, sine wave modulation, and square wave modulation.
• Pulse width modulation (PWM) is a common method used to convert inverter signals by varying the width of the pulses.

• Sine wave modulation involves generating a sine wave signal to mimic the output of an inverter.

• Square wave modulation produces a square wave output by switching between high and low voltage levels.

• ...read more
Answered by AI
Add your answer

Q1. What is the transformer?
Ans. 
A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.
• Transformers are used to increase or decrease voltage levels in electrical circuits.

• They consist of two coils of wire, known as the primary and secondary coils.

• The primary coil is connected to the input voltage source, while the secondary coil is connected to the output load.

• Transformers...read more
Answered by AI
Add your answer
Q2. What is the UPS?
Ans. 
UPS stands for Uninterruptible Power Supply, a device that provides emergency power to a load when the input power source fails.
• UPS ensures continuous power supply during power outages or fluctuations

• It typically consists of a battery, inverter, and charger

• Commonly used in data centers, hospitals, and critical infrastructure

• Examples include APC, CyberPower, and Eaton UPS systems
Answered by AI
Add your answer
Q3. What is MCB ?
Ans. 
MCB stands for Miniature Circuit Breaker, a device designed to protect electrical circuits from overloads and short circuits.
• MCB is a type of circuit breaker that automatically switches off electrical circuits during abnormal conditions like overload or short circuit.

• It is commonly used in residential and commercial electrical installations to protect electrical equipment and prevent electrical fires.

• MCBs are available...read more
Answered by AI
Add your answer
Q4. Current and Voltage difference?
Ans. 
Current is the flow of electric charge, measured in Amperes, while voltage is the force that drives the current, measured in Volts.
• Current is the rate of flow of electric charge in a circuit.

• Voltage is the electrical potential difference that drives the current.

• Current is measured in Amperes (A) while Voltage is measured in Volts (V).

• Ohm's Law relates current, voltage, and resistance: V = I * R.
Answered by AI
Add your answer
Q5. What is the CT AND PT?
Ans. 
CT and PT are electrical devices used in power systems to measure current and voltage respectively.
• CT stands for Current Transformer and is used to measure high currents by stepping down the current to a lower value.

• PT stands for Potential Transformer and is used to measure high voltages by stepping down the voltage to a lower value.

• CTs and PTs are commonly used in power distribution systems to provide accurate measure
Answered by AI
Add your answer
Q6. What is the last rating MCB hou to the amps
Ans. 
The last rating MCB can go up to 125 amps.
• The last rating MCB can typically go up to 125 amps.

• MCBs are available in various ratings such as 6A, 10A, 16A, 32A, 63A, and 125A.

• The rating of an MCB determines the maximum current it can safely handle before tripping.

• For higher current requirements, larger MCBs or other protective devices like MCCBs may be used.
Answered by AI
Add your answer

Q1. How does a lab work?
Add your answer
Q2. Why install diesel generators
Add your answer

Q1. Current (I) =voltage (V)/Resistance (R)
Ans. 
Ohm's Law states that current is equal to voltage divided by resistance.
• Ohm's Law is a fundamental principle in electrical engineering

• Current (I) is measured in Amperes (A)

• Voltage (V) is measured in Volts (V)

• Resistance (R) is measured in Ohms (Ω)

• The formula I = V/R can be used to calculate current in a circuit
Answered by AI
Add your answer
Q2. What it ohm's law
Ans. 
Ohm's law states that the current flowing through a conductor between two points is directly proportional to the voltage across the two points.
• Ohm's law is represented by the equation V = IR, where V is voltage, I is current, and R is resistance.

• It is named after German physicist Georg Simon Ohm.

• Ohm's law is fundamental in the field of electrical engineering and is used to analyze and design electrical circuits.

• It help...read more
Answered by AI
Add your answer
Q3. SI unit of flux
Ans. 
Weber (Wb)
• The SI unit of flux is Weber (Wb)

• Flux is a measure of the flow of a physical quantity through a surface

• It is commonly used in electromagnetism and is defined as the amount of magnetic field passing through a surface
Answered by AI
Add your answer
Q4. Difference between AC and DC
Ans. 
AC stands for alternating current, which changes direction periodically, while DC stands for direct current, which flows in one direction.
• AC changes direction periodically, while DC flows in one direction constantly.

• AC is used in household appliances and power distribution, while DC is used in batteries and electronic devices.

• AC can be easily converted to different voltage levels using transformers, while DC requires m...read more
Answered by AI
Add your answer
Q5. How will you calculate current carrying in a conductor ?
Ans. 
Current carrying in a conductor can be calculated using Ohm's Law, which states that current (I) equals voltage (V) divided by resistance (R).
• Use Ohm's Law: I = V / R

• Determine the voltage across the conductor

• Find the resistance of the conductor

• Calculate the current flowing through the conductor using the formula
Answered by AI
Add your answer

Q1. About UPS , Transformer materials & circuit breakers ? Sub stations equipments
Ans. 
UPS, transformer materials, circuit breakers, and substation equipment are all important components of electrical maintenance.
• UPS (Uninterruptible Power Supply) provides backup power in case of power outages.

• Transformer materials include copper wire, iron core, and insulation materials.

• Circuit breakers protect electrical circuits from damage caused by overloading or short circuits.

• Substation equipment includes transfor...read more
Answered by AI
Add your answer
Q2. What are types for circuit breakers? What is MCCB? Define Ohms laws?
Ans. 
Circuit breakers are devices that protect electrical circuits from overloads and short circuits. MCCB stands for Molded Case Circuit Breaker. Ohm's Law relates voltage, current, and resistance in a circuit.
• Types of circuit breakers include miniature circuit breakers (MCBs), molded case circuit breakers (MCCBs), and residual current circuit breakers (RCCBs).

• MCCB is a type of circuit breaker that provides protection agai...read more
Answered by AI
View 1 more answer

Q1. Electrician work my own
Add your answer
Q2. How mash salery in company
Ans. 
Salary in the company depends on various factors such as experience, skills, job position, and company policies.
• Salary is determined based on the level of experience and skills of the employee.

• Job position also plays a crucial role in determining the salary.

• Company policies and industry standards also influence the salary structure.

• Salary may vary depending on the location and cost of living.

• Negotiation skills can also
Answered by AI
Add your answer
Q3. Company time and food
Add your answer

Q1. Share details of your previous job.
Ans. 
I am Shri ram singh form allahabad uttar pradesh 
I am complited Diploma in electrical engineering fresher about quelifection 10+2
Job tellyi electrical mintenese  
Answered Anonymously
Add your answer
Q2. Why should we hire you?
Add your answer
Q3. What are your strengths and weaknesses?
Add your answer
Q4. Tell me about yourself.
Add your answer